Will “Gauger” be Replaced By Robots? 🤔
71% Chance of Automation
“Gauger” will maybe be replaced by robots.
This job is ranked #389 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or control petroleum refining or processing units. May specialize in controlling manifold and pumping systems, gauging or testing oil in storage tanks, or regulating the flow of oil into pipelines.
Job Details
- The SOC (Standard Occupational Classification) code is 51-8093.00
- The Mean Annual Wage in the U.S. is $ 67,870.00
- The Mean Hourly Wage is $ 32.00
- Currently, there are 41,630 people on this job
☝️ Information based on the reference occupation “Petroleum Pump System Operators, Refinery Operators, and Gaugers”.
Also Known As…
- Petroleum Pump System Operators, Refinery Operators, and Gaugers
- Unit Operator
- Stillman
- Refinery Operator
- Pumper
- Outside Operator
- Hydrotreater Operator
- Head Operator
- Gauger
- Crude Unit Operator
- Board Operator
- Transfer Pumper
- Terminal Gauger
- Tank Terminal Gauger
- Refining Equipment Operator
- Refiner
- Pumper Helper
- Pump House Technician
- Product Blending Supervisor
- Process Operator
- Process Control Board Operator
- Pressure Controller
- Plant Operator
- Pipeline Dispatcher
- Pilot Plant Operator
- Petroleum Supply Specialist
- Petroleum Refining Equipment Operator
- Petroleum Refinery Worker
- Petroleum Refinery Operator
- Petroleum Refinery Control Panel Operator
- Petroleum Plant Operator
- Operator
- Operations Boardman
- Oil Refinery Operator
- Oil Refiner
- Oil Pumper
- Oil Process Stillman
- Oil Plant Operator
- Oil Pipeline Operator
- Oil Pipeline Dispatcher
- Oil Gauger
- Hydro Operator
- Houseman
- Gasoline Plant Operator
- Gas Blender
- Fuel Distribution System Operator
- Fractionation Plant Supervisor
- Field Gauger
- Dock Pumper
- Dock Operator
- Control Panel Operator
- Control Operator
- Control Board Operator
- Cat Cracker Operator
- Boiler House Operator
- Blender
- Absorption Plant Operator
Tasks for “Gauger”
- Record and compile operating data, instrument readings, documentation, and results of laboratory analyses.
- Operate auxiliary equipment and control multiple processing units during distilling or treating operations, moving controls that regulate valves, pumps, compressors, and auxiliary equipment.
- Prepare calculations for receipts and deliveries of oil and oil products.
- Lower thermometers into tanks to obtain temperature readings.
- Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules.
- Synchronize activities with other pumphouses to ensure a continuous flow of products and a minimum of contamination between products.
- Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations.
- Control or operate manifold and pumping systems to circulate liquids through a petroleum refinery.
- Conduct general housekeeping of units, including wiping up oil spills and performing general cleaning duties.
- Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly.
- Calculate test result values, using standard formulas.
- Plan movement of products through lines to processing, storage, and shipping units, using knowledge of system interconnections and capacities.
- Inspect pipelines, tightening connections and lubricating valves as necessary.
- Clamp seals around valves to secure tanks.
- Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems.
- Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks.
- Read and analyze specifications, schedules, logs, test results, and laboratory recommendations to determine how to set equipment controls to produce the required qualities and quantities of products.
- Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks.
- Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled.
- Coordinate shutdowns and major projects.
- Perform tests to check the qualities and grades of products, such as assessing levels of bottom sediment, water, and foreign materials in oil samples, using centrifugal testers.
- Collect product samples by turning bleeder valves, or by lowering containers into tanks to obtain oil samples.
- Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures.
- Clean interiors of processing units by circulating chemicals and solvents within units.
Related Technology & Tools
- Compressor control panels
- Vacuum trucks
- Precision file sets
- Multipurpose hammers
- Oil sampling pumps
- Needlenose pliers
- Chain boomers
- Punch sets
- Groove joint pliers
- Vernier calipers
- Fencing pliers
- Multipurpose screwdrivers
- Hacksaws
- Wire cleaning brushes
- Handheld digital thermometers
- Pressure testers
- Oil squirt cans
- Pocket knives
- Straight tinners snips
- Petroleum trucks
- Hand centrifuges
- Measuring tapes
- Electric centrifuges
- Wire cutting tools
- Lease automatic custody transfer LACT units
- Socket sets
- Safety goggles
- Pipe wrench sets
- Flat cold chisels
- Petroleum sampling equipment
- Moving bars
- Gauge lines
- Adjustable handwrenches
- Allen wrench sets
- Laptop computers
- Calibrated hydrometer
- Oil field pumps
- Personal computers
- Digital feeler gauges
- Inventory tracking software
- Email software
- Microsoft Excel
- Supervisory control and data acquisition SCADA software
- Microsoft Word