Will “Biomedical Engineering Technician” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Biomedical Engineering Technician” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Technician
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Biomedical Engineering Technician”
- Keep documentation of service histories on all biomedical equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Adapt or design computer hardware or software for medical science uses.
- Analyze new medical procedures to forecast likely outcomes.
- Conduct preventative maintenance on equipment.
- Research new materials to be used for products, such as implanted artificial organs.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Advise and assist in the application of instrumentation in clinical environments.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Design and deliver technology to assist people with disabilities.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
Related Technology & Tools
- Motion actuators
- Optical traps
- Centrifuges
- Ultrasonic testing apparatus
- Cardiovascular prosthetic device testers
- Electroencephalography EEG equipment
- Force platforms
- Physical conditioning treadmill exercisers
- Anthropometers
- Activity monitoring devices
- Molecular cytosensors
- Spinal disk implant wear testers
- Piezoelectric sensors
- Isolators
- Eye tracking devices
- Defibrillator testing devices
- Spirometers
- Piezoelectric ceramic transducers
- Medical radiation dosimeters
- Microplate washers
- Pulsating bubble surfactometers PBS
- Endovascular stent-graft testing instruments
- Bacteria-based biosensors
- Laser ablation machines
- Ventilator performance analyzers
- Optical coherence tomography OCT scanners
- Plasma excitation chambers
- Polymer matrices
- Intravenous IV pump analyzers
- Electromyographs EMG
- Impact testers
- Insole sensors
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Grip dynamometers
- Multi-photon microscopes
- Soft materials in-vitro simulation system
- X ray machines
- Footswitch sensors
- Bio-signal amplifiers
- Microvalves
- Bio-signal simulators
- Polygraph recorders
- Accelerometers
- Micromanipulation microrheology microscopes
- Skinfold calipers
- Superconducting quantum interference devices SQUID
- Material tension/compression testing devices
- Axial-torsional testing systems
- Digital sonomicrometers
- Biosafety cabinets
- Microplate readers
- Immuno-sensors
- Opto-electronic electrogoniometers
- Milling machines
- Acoustic measurement systems
- Electrode bevelers
- Incubators
- Non-invasive blood pressure monitor analyzers
- Multi-axis kinematic knee simulators
- Material fatigue and dynamics characterization devices
- Arbitrary waveform generators
- Environmental conditions measurement devices
- Patient monitoring testing devices
- Radio frequency amplifiers
- Electrical particle detectors
- Frequency shifters
- X ray lithography equipment
- Spectrofluorimeters
- Microelectrodes
- Rapid toxicity testing systems
- Load sensors
- High-speed digital cameras
- Ultrasound imaging scanners
- Two-point discriminators
- Oscilloscopes
- Polymerase chain reaction PCR equipment
- Pressure and temperature measurement devices
- Multimeters
- Strain gauge conditioners
- Prosthetic limb testers
- Pressure sensors
- Microcontrollers
- Incubator performance analyzers
- Fluorescence microscopes
- Deflectors
- Pacemaker testing devices
- Polymer scaffolds
- Ultrasound transducers
- Ultrasound wattmeters
- Plastic injection molding machines
- Dissolved oxygen polarographic measurement devices
- Servopneumatic actuators
- Spine simulators
- Biomedical device electrical safety testers
- Flow control devices
- Laptop computers
- Scanning probe microscopes SPM
- Desktop computers
- Functional magnetic resonance imaging fMRI scanners
- Finger joint flexure testers
- Molecular vacuum pumps
- Radiation compliance testing devices
- Magnetic resonance imaging MRI systems
- Ultrasound indention probes
- Micromolding lithography equipment
- Microplating equipment
- Sterilization-in-place equipment
- Biomimetic robots
- Biomagnetic imaging scanners
- Circuit analyzers
- Micropumps
- Sublimation printers
- Acousto-optic modulators
- Electrosurgery testing devices
- 3T scanners
- Servopneumatic axial test instruments
- Grass stimulators
- Gas flow control systems
- Posturographic measurement systems
- Glass micromolds
- Strain gauges
- Pacemaker analyzers
- Cone-plate viscometers
- Torsiometers
- Bio-sensors
- Pulse oximeters
- Single photon emission computed tomography SPECT scanners
- Electroplating apparatus
- Hardness testing devices
- Dynamometers
- Quantum-based switching applications Q-switch electron waveguides
- Microfluidic networks
- Maskless photolithography equipment
- Optical particle detectors
- Bioreactors
- Electrode pullers
- Positron emission tomography PET scanners
- Fourier transform infrared FTIR spectrometers
- Pinch gauges
- Basic stamp microcontrollers
- Pressure transducers
- Optical tomographic imaging scanners
- Fourier transform infrared FTIR software
- Electromyograph analysis software
- Diagramming software
- Microsoft PowerPoint
- Electromechanical testing analysis software
- Root cause analysis software
- Mathsoft Mathcad
- Microsoft Office
- Mean time between failures MBTF software
- C++
- Equipment compliance testing software
- Advanced computer simulation language ACSL
- Computational modeling software
- Neural network modeling software
- Project estimation software
- Hardware description language HDL
- Cadence Allegro Design Entry Capture and Capture CIS
- Calculating optimum maintenance parameters COMPARE
- PTC Pro/ENGINEER Wildfire
- Hypertext markup language HTML
- Medical information software
- Motion analysis software
- R
- ERP software
- National Instruments LabVIEW
- IBM Rational RequisitePro
- Computational fluid dynamics CFD software
- Preventive maintenance software
- Instrument validation software
- Verilog
- Criticality analysis software
- Three-dimensional motion capture software
- Failure mode and effects analysis FMEA software
- Fault modeling software
- Stratasys FDM MedModeler
- Unified modeling language UML
- Simulation program with integrated circuit emphasis SPICE
- OrCAD Capture
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- SNOINO Ttree
- Microsoft Visual Basic
- Laboratory information management system LIMS
- Microsoft Excel
- Microsoft Word
- Electronic design automation EDA software
- Embedded systems testing software
- Failure rate database software
- Force platform software
- Image analysis software
- SNOINO RCM Pro
- Mentor Graphics
- Dassault Systems SOLIDWORKS
- Microsoft Project
- Molecular simulation software
- Materials testing software
- Zuken
- Minitab
- Human modeling software
- Computer aided design CAD software
- Reliability centered maintenance RCM software
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Stochastic modeling software
- C
- The MathWorks MATLAB
- Charting software
- Functional modeling software
- Failure rate data in perspective FARADIP software
- IBM Rational ClearQuest
- Instrument control software
- Cadence Encounter Test
- Force sensitive applications FSA software
- Finite element method FEM software
- Computer aided manufacturing CAM software
- Requirements management software
- Medical imaging software
- JavaScript
- Circuit simulation software
- Rapid prototyping software
- Biomechanical modeling software
- ANSYS
- SAP BusinessObjects Crystal Reports
- Wolfram Research Mathematica
- Schematic design entry software
- Technis BETAPLUS
- Extensible markup language XML
- Test automation software
- Fault tree analysis FTA software
- System testing software
- Gait analysis software
- Defect tracking software
- Dyadem FMEA Pro-6
- Common cause failure assessment software
- Calibration software
- Virtual instrument software
- Rapid application development RAD software
- IBM Rational ClearCase
- Numerical analysis software