Will “Biochemical Engineer” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Biochemical Engineer” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Biochemical Engineer”
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Conduct preventative maintenance on equipment.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Research new materials to be used for products, such as implanted artificial organs.
- Analyze new medical procedures to forecast likely outcomes.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Adapt or design computer hardware or software for medical science uses.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Advise and assist in the application of instrumentation in clinical environments.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Design and deliver technology to assist people with disabilities.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Keep documentation of service histories on all biomedical equipment.
Related Technology & Tools
- Superconducting quantum interference devices SQUID
- X ray machines
- Servopneumatic axial test instruments
- Laptop computers
- Electromyographs EMG
- Molecular cytosensors
- Microcontrollers
- Physical conditioning treadmill exercisers
- Positron emission tomography PET scanners
- Endovascular stent-graft testing instruments
- Gas flow control systems
- Bio-sensors
- Microplate readers
- Axial-torsional testing systems
- Torsiometers
- Posturographic measurement systems
- Bioreactors
- Fourier transform infrared FTIR spectrometers
- Fluorescence microscopes
- Servopneumatic actuators
- Polymer scaffolds
- Accelerometers
- Multi-axis kinematic knee simulators
- Hardness testing devices
- Ultrasound imaging scanners
- Dynamometers
- Pacemaker testing devices
- Grip dynamometers
- Spine simulators
- Incubators
- Optical coherence tomography OCT scanners
- Ultrasound wattmeters
- Microfluidic networks
- Polymer matrices
- Electrode bevelers
- Skinfold calipers
- Ultrasonic testing apparatus
- Digital sonomicrometers
- Bacteria-based biosensors
- Microelectrodes
- Scanning probe microscopes SPM
- Eye tracking devices
- Micropumps
- Motion actuators
- Biomagnetic imaging scanners
- Spinal disk implant wear testers
- Ventilator performance analyzers
- Bio-signal amplifiers
- Finger joint flexure testers
- Microvalves
- Pacemaker analyzers
- Microplating equipment
- Laser ablation machines
- Impact testers
- Isolators
- Electrode pullers
- Ultrasound transducers
- Functional magnetic resonance imaging fMRI scanners
- Acousto-optic modulators
- Milling machines
- Sublimation printers
- Magnetic resonance imaging MRI systems
- Plasma excitation chambers
- Plastic injection molding machines
- Flow control devices
- Piezoelectric sensors
- Incubator performance analyzers
- Footswitch sensors
- High-speed digital cameras
- Electrical particle detectors
- Grass stimulators
- Insole sensors
- Molecular vacuum pumps
- Electrosurgery testing devices
- Patient monitoring testing devices
- Prosthetic limb testers
- Biomedical device electrical safety testers
- Pressure transducers
- Cone-plate viscometers
- Deflectors
- Spectrofluorimeters
- Centrifuges
- Circuit analyzers
- Micromolding lithography equipment
- Biosafety cabinets
- Optical particle detectors
- Soft materials in-vitro simulation system
- Non-invasive blood pressure monitor analyzers
- Radio frequency amplifiers
- Multimeters
- Two-point discriminators
- 3T scanners
- Rapid toxicity testing systems
- Radiation compliance testing devices
- Pulsating bubble surfactometers PBS
- Arbitrary waveform generators
- Dissolved oxygen polarographic measurement devices
- Frequency shifters
- Load sensors
- Electroencephalography EEG equipment
- Pressure and temperature measurement devices
- Material tension/compression testing devices
- Anthropometers
- Piezoelectric ceramic transducers
- Activity monitoring devices
- Biomimetic robots
- Optical traps
- Force platforms
- Medical radiation dosimeters
- Sterilization-in-place equipment
- Desktop computers
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Environmental conditions measurement devices
- Material fatigue and dynamics characterization devices
- Maskless photolithography equipment
- Oscilloscopes
- Pinch gauges
- Acoustic measurement systems
- Opto-electronic electrogoniometers
- Bio-signal simulators
- Defibrillator testing devices
- Single photon emission computed tomography SPECT scanners
- Immuno-sensors
- Polymerase chain reaction PCR equipment
- Micromanipulation microrheology microscopes
- Spirometers
- Ultrasound indention probes
- Basic stamp microcontrollers
- Quantum-based switching applications Q-switch electron waveguides
- Glass micromolds
- Microplate washers
- Strain gauges
- Pulse oximeters
- Optical tomographic imaging scanners
- Strain gauge conditioners
- X ray lithography equipment
- Polygraph recorders
- Electroplating apparatus
- Cardiovascular prosthetic device testers
- Intravenous IV pump analyzers
- Pressure sensors
- Multi-photon microscopes
- Technis BETAPLUS
- Criticality analysis software
- Dyadem FMEA Pro-6
- Force sensitive applications FSA software
- Microsoft Excel
- Hardware description language HDL
- Materials testing software
- Biomechanical modeling software
- Failure rate database software
- Virtual instrument software
- Extensible markup language XML
- C++
- R
- Unified modeling language UML
- Computational fluid dynamics CFD software
- Gait analysis software
- SAP BusinessObjects Crystal Reports
- Schematic design entry software
- Dassault Systems SOLIDWORKS
- Laboratory information management system LIMS
- ANSYS
- Instrument validation software
- Cadence Allegro Design Entry Capture and Capture CIS
- Computational modeling software
- Human modeling software
- Wolfram Research Mathematica
- Fourier transform infrared FTIR software
- IBM Rational ClearQuest
- Fault modeling software
- Microsoft Project
- Image analysis software
- Mentor Graphics
- Project estimation software
- Stratasys FDM MedModeler
- The MathWorks MATLAB
- Diagramming software
- Common cause failure assessment software
- IBM Rational ClearCase
- Mean time between failures MBTF software
- Functional modeling software
- Computer aided manufacturing CAM software
- Electromechanical testing analysis software
- Preventive maintenance software
- Neural network modeling software
- Numerical analysis software
- Rapid application development RAD software
- Fault tree analysis FTA software
- Zuken
- Equipment compliance testing software
- Hypertext markup language HTML
- Defect tracking software
- Medical information software
- Molecular simulation software
- Finite element method FEM software
- Charting software
- Microsoft Word
- System testing software
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- Embedded systems testing software
- Stochastic modeling software
- Force platform software
- Advanced computer simulation language ACSL
- ERP software
- Cadence Encounter Test
- Instrument control software
- JavaScript
- Simulation program with integrated circuit emphasis SPICE
- Mathsoft Mathcad
- Microsoft Visual Basic
- Failure rate data in perspective FARADIP software
- Rapid prototyping software
- SNOINO Ttree
- SNOINO RCM Pro
- Test automation software
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Circuit simulation software
- Requirements management software
- Calculating optimum maintenance parameters COMPARE
- Microsoft PowerPoint
- Root cause analysis software
- Motion analysis software
- Electromyograph analysis software
- Minitab
- Microsoft Office
- Three-dimensional motion capture software
- National Instruments LabVIEW
- C
- Failure mode and effects analysis FMEA software
- Medical imaging software
- Computer aided design CAD software
- Electronic design automation EDA software
- Verilog
- PTC Pro/ENGINEER Wildfire
- OrCAD Capture
- Reliability centered maintenance RCM software
- IBM Rational RequisitePro
- Calibration software