Will “Biomedical Imaging Center Director” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Biomedical Imaging Center Director” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Biomedical Imaging Center Director”
- Research new materials to be used for products, such as implanted artificial organs.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Adapt or design computer hardware or software for medical science uses.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Keep documentation of service histories on all biomedical equipment.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Analyze new medical procedures to forecast likely outcomes.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Design and deliver technology to assist people with disabilities.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Conduct preventative maintenance on equipment.
- Advise and assist in the application of instrumentation in clinical environments.
Related Technology & Tools
- Biomimetic robots
- Microplate washers
- Defibrillator testing devices
- Digital sonomicrometers
- Activity monitoring devices
- Endovascular stent-graft testing instruments
- Isolators
- Non-invasive blood pressure monitor analyzers
- Sublimation printers
- Fluorescence microscopes
- Microcontrollers
- Microplate readers
- Pressure sensors
- Bio-sensors
- Posturographic measurement systems
- Axial-torsional testing systems
- Electromyographs EMG
- Optical traps
- Deflectors
- Impact testers
- Incubator performance analyzers
- Prosthetic limb testers
- Piezoelectric ceramic transducers
- Ultrasound transducers
- Electroplating apparatus
- Medical radiation dosimeters
- Piezoelectric sensors
- Force platforms
- Pressure transducers
- Molecular vacuum pumps
- Electrosurgery testing devices
- Ultrasonic testing apparatus
- Biomedical device electrical safety testers
- Radio frequency amplifiers
- Plasma excitation chambers
- Bio-signal amplifiers
- Finger joint flexure testers
- Patient monitoring testing devices
- Functional magnetic resonance imaging fMRI scanners
- Skinfold calipers
- Electroencephalography EEG equipment
- Pulsating bubble surfactometers PBS
- Load sensors
- Centrifuges
- Molecular cytosensors
- Electrode bevelers
- Optical coherence tomography OCT scanners
- Polymer matrices
- Spectrofluorimeters
- Spirometers
- Polygraph recorders
- Microelectrodes
- Bioreactors
- Circuit analyzers
- Pinch gauges
- Basic stamp microcontrollers
- Superconducting quantum interference devices SQUID
- Quantum-based switching applications Q-switch electron waveguides
- Immuno-sensors
- Servopneumatic axial test instruments
- High-speed digital cameras
- Material tension/compression testing devices
- Microfluidic networks
- Sterilization-in-place equipment
- Dynamometers
- Positron emission tomography PET scanners
- Material fatigue and dynamics characterization devices
- Laptop computers
- Cardiovascular prosthetic device testers
- Environmental conditions measurement devices
- Pacemaker testing devices
- Flow control devices
- Insole sensors
- Acoustic measurement systems
- Servopneumatic actuators
- Anthropometers
- Multimeters
- Dissolved oxygen polarographic measurement devices
- Bio-signal simulators
- Spinal disk implant wear testers
- Hardness testing devices
- Desktop computers
- Strain gauges
- Acousto-optic modulators
- Footswitch sensors
- Strain gauge conditioners
- Micromanipulation microrheology microscopes
- Laser ablation machines
- Micromolding lithography equipment
- Grip dynamometers
- Maskless photolithography equipment
- Multi-photon microscopes
- Polymer scaffolds
- Bacteria-based biosensors
- Single photon emission computed tomography SPECT scanners
- Ultrasound indention probes
- Ultrasound imaging scanners
- Optical tomographic imaging scanners
- Pressure and temperature measurement devices
- Arbitrary waveform generators
- Electrical particle detectors
- Intravenous IV pump analyzers
- Motion actuators
- Accelerometers
- Incubators
- Multi-axis kinematic knee simulators
- Milling machines
- Gas flow control systems
- Radiation compliance testing devices
- Optical particle detectors
- Microvalves
- Pulse oximeters
- Fourier transform infrared FTIR spectrometers
- Eye tracking devices
- 3T scanners
- X ray lithography equipment
- Opto-electronic electrogoniometers
- Plastic injection molding machines
- Rapid toxicity testing systems
- Cone-plate viscometers
- Micropumps
- Microplating equipment
- Biosafety cabinets
- Polymerase chain reaction PCR equipment
- Grass stimulators
- X ray machines
- Ultrasound wattmeters
- Oscilloscopes
- Spine simulators
- Two-point discriminators
- Soft materials in-vitro simulation system
- Glass micromolds
- Pacemaker analyzers
- Torsiometers
- Magnetic resonance imaging MRI systems
- Scanning probe microscopes SPM
- Biomagnetic imaging scanners
- Physical conditioning treadmill exercisers
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Ventilator performance analyzers
- Frequency shifters
- Electrode pullers
- Microsoft Word
- Medical imaging software
- Failure rate database software
- Minitab
- System testing software
- Wolfram Research Mathematica
- Schematic design entry software
- Project estimation software
- The MathWorks MATLAB
- National Instruments LabVIEW
- Microsoft Office
- Charting software
- Numerical analysis software
- Dassault Systems SOLIDWORKS
- Root cause analysis software
- C++
- Simulation program with integrated circuit emphasis SPICE
- Calculating optimum maintenance parameters COMPARE
- IBM Rational ClearQuest
- C
- Dyadem FMEA Pro-6
- Unified modeling language UML
- Microsoft Visual Basic
- Mean time between failures MBTF software
- Fourier transform infrared FTIR software
- Computational fluid dynamics CFD software
- Microsoft PowerPoint
- Computer aided design CAD software
- Preventive maintenance software
- Finite element method FEM software
- Functional modeling software
- Motion analysis software
- ERP software
- IBM Rational RequisitePro
- PTC Pro/ENGINEER Wildfire
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Image analysis software
- Materials testing software
- SAP BusinessObjects Crystal Reports
- Zuken
- Mathsoft Mathcad
- Virtual instrument software
- SNOINO Ttree
- SNOINO RCM Pro
- Failure mode and effects analysis FMEA software
- Requirements management software
- ANSYS
- Microsoft Excel
- Molecular simulation software
- Hardware description language HDL
- Force platform software
- Criticality analysis software
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- Fault tree analysis FTA software
- Equipment compliance testing software
- Rapid application development RAD software
- Mentor Graphics
- Computational modeling software
- R
- Failure rate data in perspective FARADIP software
- OrCAD Capture
- Electromechanical testing analysis software
- Human modeling software
- Three-dimensional motion capture software
- Embedded systems testing software
- Verilog
- Defect tracking software
- Advanced computer simulation language ACSL
- Circuit simulation software
- Common cause failure assessment software
- Microsoft Project
- Computer aided manufacturing CAM software
- Electronic design automation EDA software
- Electromyograph analysis software
- Instrument control software
- Test automation software
- IBM Rational ClearCase
- Technis BETAPLUS
- Stratasys FDM MedModeler
- Neural network modeling software
- JavaScript
- Rapid prototyping software
- Extensible markup language XML
- Hypertext markup language HTML
- Diagramming software
- Reliability centered maintenance RCM software
- Cadence Encounter Test
- Instrument validation software
- Calibration software
- Stochastic modeling software
- Laboratory information management system LIMS
- Fault modeling software
- Cadence Allegro Design Entry Capture and Capture CIS
- Biomechanical modeling software
- Gait analysis software
- Force sensitive applications FSA software
- Medical information software