Will “Nanotechnologist” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Nanotechnologist” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Nanotechnologist”
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Advise and assist in the application of instrumentation in clinical environments.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Research new materials to be used for products, such as implanted artificial organs.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Design and deliver technology to assist people with disabilities.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Adapt or design computer hardware or software for medical science uses.
- Keep documentation of service histories on all biomedical equipment.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Conduct preventative maintenance on equipment.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Analyze new medical procedures to forecast likely outcomes.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
Related Technology & Tools
- Gas flow control systems
- Grip dynamometers
- Torsiometers
- Microplate readers
- Spine simulators
- Environmental conditions measurement devices
- Microvalves
- Glass micromolds
- Force platforms
- Piezoelectric sensors
- Skinfold calipers
- Biomagnetic imaging scanners
- Electrode pullers
- Micromolding lithography equipment
- Biomedical device electrical safety testers
- Molecular cytosensors
- Soft materials in-vitro simulation system
- Ultrasound wattmeters
- Electrosurgery testing devices
- Polymerase chain reaction PCR equipment
- Maskless photolithography equipment
- Ultrasound indention probes
- Load sensors
- Molecular vacuum pumps
- Non-invasive blood pressure monitor analyzers
- Multi-axis kinematic knee simulators
- X ray machines
- Prosthetic limb testers
- Medical radiation dosimeters
- Pacemaker testing devices
- Milling machines
- Incubator performance analyzers
- Micromanipulation microrheology microscopes
- Spectrofluorimeters
- Footswitch sensors
- Positron emission tomography PET scanners
- Pressure transducers
- Optical tomographic imaging scanners
- Patient monitoring testing devices
- Multi-photon microscopes
- Electroencephalography EEG equipment
- Electroplating apparatus
- Isolators
- Intravenous IV pump analyzers
- Bio-signal amplifiers
- Quantum-based switching applications Q-switch electron waveguides
- Ultrasonic testing apparatus
- Opto-electronic electrogoniometers
- Servopneumatic actuators
- Dynamometers
- Axial-torsional testing systems
- Bacteria-based biosensors
- Optical particle detectors
- Circuit analyzers
- Sublimation printers
- Oscilloscopes
- Cone-plate viscometers
- Acousto-optic modulators
- Material fatigue and dynamics characterization devices
- Polygraph recorders
- Finger joint flexure testers
- Scanning probe microscopes SPM
- Eye tracking devices
- Frequency shifters
- Endovascular stent-graft testing instruments
- Ultrasound imaging scanners
- Magnetic resonance imaging MRI systems
- Cardiovascular prosthetic device testers
- Dissolved oxygen polarographic measurement devices
- Microfluidic networks
- Optical traps
- Superconducting quantum interference devices SQUID
- Electrode bevelers
- Centrifuges
- Microplating equipment
- Rapid toxicity testing systems
- Material tension/compression testing devices
- Deflectors
- Two-point discriminators
- Basic stamp microcontrollers
- Servopneumatic axial test instruments
- Microplate washers
- Bio-signal simulators
- Plastic injection molding machines
- Polymer scaffolds
- Grass stimulators
- High-speed digital cameras
- Piezoelectric ceramic transducers
- Motion actuators
- Spinal disk implant wear testers
- Posturographic measurement systems
- Digital sonomicrometers
- Pulsating bubble surfactometers PBS
- Biosafety cabinets
- Microcontrollers
- Arbitrary waveform generators
- Accelerometers
- Incubators
- Fourier transform infrared FTIR spectrometers
- Fluorescence microscopes
- Multimeters
- Electrical particle detectors
- Radiation compliance testing devices
- Pinch gauges
- Ultrasound transducers
- Desktop computers
- Single photon emission computed tomography SPECT scanners
- Plasma excitation chambers
- Laser ablation machines
- Functional magnetic resonance imaging fMRI scanners
- Flow control devices
- Impact testers
- Pulse oximeters
- Sterilization-in-place equipment
- Polymer matrices
- Micropumps
- Pressure and temperature measurement devices
- Insole sensors
- Radio frequency amplifiers
- Biomimetic robots
- Anthropometers
- Laptop computers
- Strain gauge conditioners
- Immuno-sensors
- Physical conditioning treadmill exercisers
- Strain gauges
- Ventilator performance analyzers
- X ray lithography equipment
- Activity monitoring devices
- Bioreactors
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Defibrillator testing devices
- Bio-sensors
- 3T scanners
- Pacemaker analyzers
- Spirometers
- Optical coherence tomography OCT scanners
- Electromyographs EMG
- Acoustic measurement systems
- Microelectrodes
- Hardness testing devices
- Pressure sensors
- Simulation program with integrated circuit emphasis SPICE
- Mathsoft Mathcad
- National Instruments LabVIEW
- Force platform software
- Materials testing software
- Common cause failure assessment software
- Extensible markup language XML
- PTC Pro/ENGINEER Wildfire
- Biomechanical modeling software
- Calibration software
- Reliability centered maintenance RCM software
- Neural network modeling software
- Motion analysis software
- Gait analysis software
- Functional modeling software
- IBM Rational ClearQuest
- Molecular simulation software
- Criticality analysis software
- Circuit simulation software
- Microsoft Excel
- Microsoft PowerPoint
- Defect tracking software
- Computational fluid dynamics CFD software
- Mentor Graphics
- Computational modeling software
- R
- Microsoft Visual Basic
- Microsoft Office
- Project estimation software
- Preventive maintenance software
- System testing software
- Electromyograph analysis software
- Fault modeling software
- Fourier transform infrared FTIR software
- JavaScript
- Zuken
- Unified modeling language UML
- Image analysis software
- Failure rate database software
- Failure mode and effects analysis FMEA software
- Dyadem FMEA Pro-6
- Hardware description language HDL
- Minitab
- Hypertext markup language HTML
- Dassault Systems SOLIDWORKS
- Cadence Encounter Test
- Medical imaging software
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- SAP BusinessObjects Crystal Reports
- Wolfram Research Mathematica
- Failure rate data in perspective FARADIP software
- C++
- Virtual instrument software
- Calculating optimum maintenance parameters COMPARE
- Instrument control software
- Advanced computer simulation language ACSL
- ERP software
- Verilog
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- IBM Rational ClearCase
- Mean time between failures MBTF software
- Three-dimensional motion capture software
- SNOINO RCM Pro
- Microsoft Word
- Instrument validation software
- C
- IBM Rational RequisitePro
- Stratasys FDM MedModeler
- Diagramming software
- Rapid application development RAD software
- Human modeling software
- Finite element method FEM software
- Computer aided manufacturing CAM software
- The MathWorks MATLAB
- Charting software
- Numerical analysis software
- Test automation software
- SNOINO Ttree
- Cadence Allegro Design Entry Capture and Capture CIS
- Embedded systems testing software
- Electromechanical testing analysis software
- Equipment compliance testing software
- Technis BETAPLUS
- Computer aided design CAD software
- Force sensitive applications FSA software
- Requirements management software
- Laboratory information management system LIMS
- Schematic design entry software
- Fault tree analysis FTA software
- Root cause analysis software
- Electronic design automation EDA software
- Rapid prototyping software
- ANSYS
- Microsoft Project
- Stochastic modeling software
- Medical information software
- OrCAD Capture