Will “Bio-Mechanical Engineer” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Bio-Mechanical Engineer” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Bio-Mechanical Engineer”
- Conduct preventative maintenance on equipment.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Adapt or design computer hardware or software for medical science uses.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Advise and assist in the application of instrumentation in clinical environments.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Research new materials to be used for products, such as implanted artificial organs.
- Analyze new medical procedures to forecast likely outcomes.
- Design and deliver technology to assist people with disabilities.
- Keep documentation of service histories on all biomedical equipment.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
Related Technology & Tools
- Micropumps
- Spirometers
- Insole sensors
- Footswitch sensors
- Defibrillator testing devices
- Arbitrary waveform generators
- X ray machines
- Finger joint flexure testers
- Non-invasive blood pressure monitor analyzers
- Bio-signal amplifiers
- Oscilloscopes
- Pulsating bubble surfactometers PBS
- Isolators
- Micromolding lithography equipment
- Flow control devices
- Microelectrodes
- Bacteria-based biosensors
- Acousto-optic modulators
- Electrical particle detectors
- Activity monitoring devices
- Centrifuges
- Optical traps
- Deflectors
- Piezoelectric sensors
- Electroplating apparatus
- Sublimation printers
- Servopneumatic axial test instruments
- Multimeters
- Load sensors
- Pressure and temperature measurement devices
- Positron emission tomography PET scanners
- 3T scanners
- Opto-electronic electrogoniometers
- Molecular cytosensors
- Ultrasound imaging scanners
- Pulse oximeters
- Multi-photon microscopes
- Scanning probe microscopes SPM
- Immuno-sensors
- Quantum-based switching applications Q-switch electron waveguides
- Intravenous IV pump analyzers
- Maskless photolithography equipment
- Optical coherence tomography OCT scanners
- Hardness testing devices
- Endovascular stent-graft testing instruments
- Impact testers
- Superconducting quantum interference devices SQUID
- Strain gauge conditioners
- Eye tracking devices
- Functional magnetic resonance imaging fMRI scanners
- Bio-signal simulators
- Patient monitoring testing devices
- Microfluidic networks
- Pressure sensors
- Optical particle detectors
- Force platforms
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Optical tomographic imaging scanners
- Microvalves
- Radio frequency amplifiers
- Pressure transducers
- X ray lithography equipment
- Electrode pullers
- Laser ablation machines
- Environmental conditions measurement devices
- Skinfold calipers
- Prosthetic limb testers
- Multi-axis kinematic knee simulators
- Rapid toxicity testing systems
- Motion actuators
- Pacemaker testing devices
- Dynamometers
- Piezoelectric ceramic transducers
- Milling machines
- Frequency shifters
- Gas flow control systems
- Plasma excitation chambers
- Microplate washers
- Fourier transform infrared FTIR spectrometers
- Spine simulators
- Torsiometers
- Acoustic measurement systems
- Cone-plate viscometers
- Bioreactors
- Servopneumatic actuators
- Strain gauges
- Fluorescence microscopes
- Micromanipulation microrheology microscopes
- Physical conditioning treadmill exercisers
- Biosafety cabinets
- Pinch gauges
- Magnetic resonance imaging MRI systems
- Material fatigue and dynamics characterization devices
- Electrosurgery testing devices
- Biomagnetic imaging scanners
- Two-point discriminators
- Basic stamp microcontrollers
- Polygraph recorders
- Incubator performance analyzers
- Single photon emission computed tomography SPECT scanners
- Circuit analyzers
- Glass micromolds
- Electroencephalography EEG equipment
- Biomedical device electrical safety testers
- Accelerometers
- Cardiovascular prosthetic device testers
- Anthropometers
- Ultrasound wattmeters
- Electrode bevelers
- Electromyographs EMG
- Microplating equipment
- Laptop computers
- Plastic injection molding machines
- Spectrofluorimeters
- Ultrasound indention probes
- Ventilator performance analyzers
- Desktop computers
- Grass stimulators
- Sterilization-in-place equipment
- Polymer scaffolds
- Incubators
- Radiation compliance testing devices
- Bio-sensors
- Axial-torsional testing systems
- Spinal disk implant wear testers
- Ultrasound transducers
- Microcontrollers
- Posturographic measurement systems
- Dissolved oxygen polarographic measurement devices
- Polymer matrices
- Pacemaker analyzers
- Digital sonomicrometers
- High-speed digital cameras
- Polymerase chain reaction PCR equipment
- Microplate readers
- Material tension/compression testing devices
- Ultrasonic testing apparatus
- Biomimetic robots
- Soft materials in-vitro simulation system
- Grip dynamometers
- Molecular vacuum pumps
- Medical radiation dosimeters
- Mentor Graphics
- Technis BETAPLUS
- Diagramming software
- Microsoft PowerPoint
- Wolfram Research Mathematica
- Stochastic modeling software
- Embedded systems testing software
- Hypertext markup language HTML
- Computational fluid dynamics CFD software
- IBM Rational RequisitePro
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- Common cause failure assessment software
- Laboratory information management system LIMS
- Failure rate database software
- Mean time between failures MBTF software
- The MathWorks MATLAB
- OrCAD Capture
- Biomechanical modeling software
- Microsoft Word
- Cadence Allegro Design Entry Capture and Capture CIS
- Simulation program with integrated circuit emphasis SPICE
- Preventive maintenance software
- Hardware description language HDL
- Computer aided manufacturing CAM software
- Equipment compliance testing software
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Image analysis software
- Charting software
- Electronic design automation EDA software
- National Instruments LabVIEW
- Functional modeling software
- Molecular simulation software
- Extensible markup language XML
- Zuken
- Materials testing software
- Unified modeling language UML
- Minitab
- Schematic design entry software
- Microsoft Project
- Instrument validation software
- Defect tracking software
- ANSYS
- Circuit simulation software
- Computational modeling software
- C
- C++
- IBM Rational ClearQuest
- Microsoft Excel
- Failure mode and effects analysis FMEA software
- Rapid prototyping software
- Computer aided design CAD software
- ERP software
- Fault tree analysis FTA software
- Microsoft Office
- Dassault Systems SOLIDWORKS
- Force sensitive applications FSA software
- Requirements management software
- Cadence Encounter Test
- SNOINO RCM Pro
- Medical imaging software
- Virtual instrument software
- Fourier transform infrared FTIR software
- R
- Dyadem FMEA Pro-6
- Neural network modeling software
- SAP BusinessObjects Crystal Reports
- Three-dimensional motion capture software
- Calibration software
- Electromyograph analysis software
- Advanced computer simulation language ACSL
- IBM Rational ClearCase
- PTC Pro/ENGINEER Wildfire
- Motion analysis software
- Instrument control software
- Criticality analysis software
- Calculating optimum maintenance parameters COMPARE
- Reliability centered maintenance RCM software
- Gait analysis software
- Verilog
- JavaScript
- Human modeling software
- Fault modeling software
- Microsoft Visual Basic
- Test automation software
- Project estimation software
- Failure rate data in perspective FARADIP software
- Electromechanical testing analysis software
- Stratasys FDM MedModeler
- Mathsoft Mathcad
- Finite element method FEM software
- Rapid application development RAD software
- Root cause analysis software
- Medical information software
- SNOINO Ttree
- Numerical analysis software
- Force platform software
- System testing software