Will “Biomedical Engineering Supervisor” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Biomedical Engineering Supervisor” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Biomedical Engineering Supervisor”
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Research new materials to be used for products, such as implanted artificial organs.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Advise and assist in the application of instrumentation in clinical environments.
- Adapt or design computer hardware or software for medical science uses.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Design and deliver technology to assist people with disabilities.
- Conduct preventative maintenance on equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Keep documentation of service histories on all biomedical equipment.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Analyze new medical procedures to forecast likely outcomes.
Related Technology & Tools
- Medical radiation dosimeters
- Basic stamp microcontrollers
- Micropumps
- Electromyographs EMG
- Incubators
- Servopneumatic actuators
- Electrical particle detectors
- Optical traps
- Optical coherence tomography OCT scanners
- Activity monitoring devices
- Footswitch sensors
- Deflectors
- Microvalves
- Optical tomographic imaging scanners
- Biomedical device electrical safety testers
- Pacemaker analyzers
- Molecular vacuum pumps
- Axial-torsional testing systems
- Polygraph recorders
- Laptop computers
- Milling machines
- Microplating equipment
- Fluorescence microscopes
- Gas flow control systems
- Environmental conditions measurement devices
- Accelerometers
- Microelectrodes
- Pacemaker testing devices
- Positron emission tomography PET scanners
- Bio-signal simulators
- Ultrasonic testing apparatus
- Servopneumatic axial test instruments
- Pressure sensors
- Motion actuators
- Pulse oximeters
- Desktop computers
- Grass stimulators
- Two-point discriminators
- High-speed digital cameras
- Material tension/compression testing devices
- Multi-axis kinematic knee simulators
- Microcontrollers
- Spectrofluorimeters
- Bacteria-based biosensors
- Quantum-based switching applications Q-switch electron waveguides
- Soft materials in-vitro simulation system
- Multi-photon microscopes
- Plastic injection molding machines
- Pressure transducers
- Anthropometers
- Piezoelectric sensors
- Multimeters
- Maskless photolithography equipment
- Strain gauges
- Acousto-optic modulators
- Biomagnetic imaging scanners
- 3T scanners
- Optical particle detectors
- Cardiovascular prosthetic device testers
- Fourier transform infrared FTIR spectrometers
- Strain gauge conditioners
- Rapid toxicity testing systems
- Radio frequency amplifiers
- Pressure and temperature measurement devices
- Eye tracking devices
- Biosafety cabinets
- Electroplating apparatus
- Piezoelectric ceramic transducers
- Ultrasound transducers
- Electrode pullers
- Impact testers
- Hardness testing devices
- Microplate readers
- Functional magnetic resonance imaging fMRI scanners
- Endovascular stent-graft testing instruments
- Ultrasound indention probes
- Magnetic resonance imaging MRI systems
- Dissolved oxygen polarographic measurement devices
- Force platforms
- X ray lithography equipment
- Laser ablation machines
- Bio-signal amplifiers
- Material fatigue and dynamics characterization devices
- Patient monitoring testing devices
- Centrifuges
- Glass micromolds
- Radiation compliance testing devices
- Micromanipulation microrheology microscopes
- Immuno-sensors
- Pulsating bubble surfactometers PBS
- Biomimetic robots
- Bioreactors
- Microplate washers
- X ray machines
- Cone-plate viscometers
- Electroencephalography EEG equipment
- Electrosurgery testing devices
- Frequency shifters
- Torsiometers
- Polymerase chain reaction PCR equipment
- Spine simulators
- Superconducting quantum interference devices SQUID
- Grip dynamometers
- Load sensors
- Ultrasound imaging scanners
- Insole sensors
- Prosthetic limb testers
- Oscilloscopes
- Plasma excitation chambers
- Molecular cytosensors
- Ventilator performance analyzers
- Dynamometers
- Posturographic measurement systems
- Incubator performance analyzers
- Isolators
- Bio-sensors
- Ultrasound wattmeters
- Electrode bevelers
- Scanning probe microscopes SPM
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Flow control devices
- Polymer scaffolds
- Microfluidic networks
- Skinfold calipers
- Acoustic measurement systems
- Finger joint flexure testers
- Micromolding lithography equipment
- Defibrillator testing devices
- Arbitrary waveform generators
- Physical conditioning treadmill exercisers
- Circuit analyzers
- Opto-electronic electrogoniometers
- Non-invasive blood pressure monitor analyzers
- Pinch gauges
- Spirometers
- Sterilization-in-place equipment
- Intravenous IV pump analyzers
- Polymer matrices
- Single photon emission computed tomography SPECT scanners
- Sublimation printers
- Spinal disk implant wear testers
- Digital sonomicrometers
- Microsoft Word
- Materials testing software
- Electronic design automation EDA software
- IBM Rational ClearQuest
- Fault tree analysis FTA software
- OrCAD Capture
- Wolfram Research Mathematica
- ERP software
- Calibration software
- Zuken
- Hypertext markup language HTML
- Project estimation software
- Technis BETAPLUS
- Instrument validation software
- Failure rate database software
- Hardware description language HDL
- PTC Pro/ENGINEER Wildfire
- Molecular simulation software
- Simulation program with integrated circuit emphasis SPICE
- Reliability centered maintenance RCM software
- Virtual instrument software
- Preventive maintenance software
- Failure mode and effects analysis FMEA software
- Computational modeling software
- Fault modeling software
- Force platform software
- Calculating optimum maintenance parameters COMPARE
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- R
- Mathsoft Mathcad
- Charting software
- Failure rate data in perspective FARADIP software
- Human modeling software
- Requirements management software
- Unified modeling language UML
- Laboratory information management system LIMS
- Medical information software
- SNOINO RCM Pro
- C
- Medical imaging software
- Microsoft Office
- Computer aided manufacturing CAM software
- C++
- Instrument control software
- Electromechanical testing analysis software
- Embedded systems testing software
- Microsoft PowerPoint
- Defect tracking software
- Microsoft Excel
- Minitab
- Mean time between failures MBTF software
- Dassault Systems SOLIDWORKS
- System testing software
- IBM Rational RequisitePro
- Motion analysis software
- Gait analysis software
- Circuit simulation software
- Rapid application development RAD software
- Cadence Encounter Test
- Computational fluid dynamics CFD software
- Verilog
- Microsoft Visual Basic
- Criticality analysis software
- Force sensitive applications FSA software
- Three-dimensional motion capture software
- Computer aided design CAD software
- SNOINO Ttree
- The MathWorks MATLAB
- Cadence Allegro Design Entry Capture and Capture CIS
- SAP BusinessObjects Crystal Reports
- Mentor Graphics
- Numerical analysis software
- Root cause analysis software
- IBM Rational ClearCase
- Microsoft Project
- Extensible markup language XML
- Finite element method FEM software
- Fourier transform infrared FTIR software
- Biomechanical modeling software
- Test automation software
- Electromyograph analysis software
- ANSYS
- Neural network modeling software
- Advanced computer simulation language ACSL
- Functional modeling software
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- JavaScript
- Schematic design entry software
- Equipment compliance testing software
- National Instruments LabVIEW
- Common cause failure assessment software
- Dyadem FMEA Pro-6
- Rapid prototyping software
- Stratasys FDM MedModeler
- Image analysis software
- Stochastic modeling software
- Diagramming software