Will “Biomedical Manager” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Biomedical Manager” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Manager
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Biomedical Manager”
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Conduct preventative maintenance on equipment.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Keep documentation of service histories on all biomedical equipment.
- Advise and assist in the application of instrumentation in clinical environments.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Analyze new medical procedures to forecast likely outcomes.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Adapt or design computer hardware or software for medical science uses.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Research new materials to be used for products, such as implanted artificial organs.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Design and deliver technology to assist people with disabilities.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
Related Technology & Tools
- Insole sensors
- Pulsating bubble surfactometers PBS
- Bio-signal amplifiers
- Frequency shifters
- Laser ablation machines
- Electroplating apparatus
- X ray lithography equipment
- Arbitrary waveform generators
- Electromyographs EMG
- Piezoelectric ceramic transducers
- Bioreactors
- Load sensors
- Patient monitoring testing devices
- Ventilator performance analyzers
- Ultrasound imaging scanners
- Polymer matrices
- Axial-torsional testing systems
- Spectrofluorimeters
- Pacemaker testing devices
- Spinal disk implant wear testers
- Glass micromolds
- Bio-sensors
- Isolators
- Cone-plate viscometers
- Sublimation printers
- Multi-photon microscopes
- Hardness testing devices
- Microplate washers
- Spine simulators
- Ultrasonic testing apparatus
- Dynamometers
- Strain gauge conditioners
- Activity monitoring devices
- Single photon emission computed tomography SPECT scanners
- Fourier transform infrared FTIR spectrometers
- Acoustic measurement systems
- Functional magnetic resonance imaging fMRI scanners
- Non-invasive blood pressure monitor analyzers
- Strain gauges
- Defibrillator testing devices
- Electrode bevelers
- Maskless photolithography equipment
- Acousto-optic modulators
- Medical radiation dosimeters
- Sterilization-in-place equipment
- Cardiovascular prosthetic device testers
- Prosthetic limb testers
- Pinch gauges
- Plasma excitation chambers
- Finger joint flexure testers
- Microfluidic networks
- Plastic injection molding machines
- Pulse oximeters
- Digital sonomicrometers
- Flow control devices
- Endovascular stent-graft testing instruments
- Electrical particle detectors
- Intravenous IV pump analyzers
- Micromolding lithography equipment
- Optical coherence tomography OCT scanners
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Desktop computers
- Magnetic resonance imaging MRI systems
- Positron emission tomography PET scanners
- Optical particle detectors
- Motion actuators
- Ultrasound transducers
- Environmental conditions measurement devices
- Multimeters
- Dissolved oxygen polarographic measurement devices
- Circuit analyzers
- Incubator performance analyzers
- Piezoelectric sensors
- Torsiometers
- Biomedical device electrical safety testers
- Servopneumatic actuators
- Accelerometers
- Electrosurgery testing devices
- Polymer scaffolds
- Molecular cytosensors
- Servopneumatic axial test instruments
- Rapid toxicity testing systems
- Biomimetic robots
- Radio frequency amplifiers
- Laptop computers
- Polymerase chain reaction PCR equipment
- Bio-signal simulators
- Polygraph recorders
- Incubators
- Biomagnetic imaging scanners
- Posturographic measurement systems
- Oscilloscopes
- 3T scanners
- Immuno-sensors
- Pressure and temperature measurement devices
- Bacteria-based biosensors
- Pressure transducers
- Radiation compliance testing devices
- Biosafety cabinets
- Material fatigue and dynamics characterization devices
- Skinfold calipers
- Soft materials in-vitro simulation system
- X ray machines
- Anthropometers
- Deflectors
- Molecular vacuum pumps
- Centrifuges
- Ultrasound wattmeters
- Multi-axis kinematic knee simulators
- Fluorescence microscopes
- Force platforms
- Microcontrollers
- Microelectrodes
- Superconducting quantum interference devices SQUID
- Quantum-based switching applications Q-switch electron waveguides
- Basic stamp microcontrollers
- Pacemaker analyzers
- Micromanipulation microrheology microscopes
- Grip dynamometers
- Microvalves
- Optical traps
- Pressure sensors
- High-speed digital cameras
- Electroencephalography EEG equipment
- Footswitch sensors
- Material tension/compression testing devices
- Optical tomographic imaging scanners
- Two-point discriminators
- Microplate readers
- Physical conditioning treadmill exercisers
- Opto-electronic electrogoniometers
- Grass stimulators
- Gas flow control systems
- Scanning probe microscopes SPM
- Milling machines
- Impact testers
- Ultrasound indention probes
- Electrode pullers
- Spirometers
- Eye tracking devices
- Micropumps
- Microplating equipment
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Embedded systems testing software
- National Instruments LabVIEW
- Human modeling software
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- Microsoft Project
- Zuken
- Computational modeling software
- Test automation software
- Instrument control software
- Image analysis software
- Criticality analysis software
- ANSYS
- Extensible markup language XML
- Root cause analysis software
- Motion analysis software
- Simulation program with integrated circuit emphasis SPICE
- Stratasys FDM MedModeler
- Microsoft Office
- Preventive maintenance software
- Dassault Systems SOLIDWORKS
- Equipment compliance testing software
- Cadence Allegro Design Entry Capture and Capture CIS
- Project estimation software
- Force platform software
- Medical information software
- Numerical analysis software
- IBM Rational ClearCase
- C
- Charting software
- Fault modeling software
- Medical imaging software
- Virtual instrument software
- Microsoft Word
- Hardware description language HDL
- Wolfram Research Mathematica
- Computer aided manufacturing CAM software
- Common cause failure assessment software
- Electromyograph analysis software
- Circuit simulation software
- Failure rate database software
- Mentor Graphics
- Gait analysis software
- Rapid prototyping software
- The MathWorks MATLAB
- Mean time between failures MBTF software
- Molecular simulation software
- Electronic design automation EDA software
- Laboratory information management system LIMS
- Microsoft PowerPoint
- R
- Rapid application development RAD software
- Calculating optimum maintenance parameters COMPARE
- Failure mode and effects analysis FMEA software
- Functional modeling software
- Mathsoft Mathcad
- SNOINO Ttree
- Microsoft Visual Basic
- Minitab
- Electromechanical testing analysis software
- PTC Pro/ENGINEER Wildfire
- Fault tree analysis FTA software
- Defect tracking software
- Schematic design entry software
- Dyadem FMEA Pro-6
- Calibration software
- Neural network modeling software
- Computer aided design CAD software
- IBM Rational RequisitePro
- C++
- Biomechanical modeling software
- System testing software
- Stochastic modeling software
- Advanced computer simulation language ACSL
- Finite element method FEM software
- Diagramming software
- Unified modeling language UML
- Three-dimensional motion capture software
- Reliability centered maintenance RCM software
- JavaScript
- Instrument validation software
- Verilog
- Failure rate data in perspective FARADIP software
- OrCAD Capture
- Requirements management software
- ERP software
- IBM Rational ClearQuest
- Microsoft Excel
- SAP BusinessObjects Crystal Reports
- Force sensitive applications FSA software
- Computational fluid dynamics CFD software
- Cadence Encounter Test
- Hypertext markup language HTML
- Technis BETAPLUS
- Fourier transform infrared FTIR software
- SNOINO RCM Pro
- Materials testing software