Will “Biomedical Manager” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Biomedical Manager” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Biomedical Manager”
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Adapt or design computer hardware or software for medical science uses.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Research new materials to be used for products, such as implanted artificial organs.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Conduct preventative maintenance on equipment.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Design and deliver technology to assist people with disabilities.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Keep documentation of service histories on all biomedical equipment.
- Advise and assist in the application of instrumentation in clinical environments.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Analyze new medical procedures to forecast likely outcomes.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
Related Technology & Tools
- Optical coherence tomography OCT scanners
- Microplating equipment
- Pressure sensors
- Magnetic resonance imaging MRI systems
- Spectrofluorimeters
- Pulse oximeters
- Rapid toxicity testing systems
- Acoustic measurement systems
- Hardness testing devices
- Molecular cytosensors
- Multi-photon microscopes
- Ultrasonic testing apparatus
- Oscilloscopes
- Quantum-based switching applications Q-switch electron waveguides
- Electrosurgery testing devices
- Pinch gauges
- Polymerase chain reaction PCR equipment
- Electroplating apparatus
- Functional magnetic resonance imaging fMRI scanners
- Motion actuators
- Optical particle detectors
- Strain gauges
- Torsiometers
- Bacteria-based biosensors
- Activity monitoring devices
- Force platforms
- Accelerometers
- Piezoelectric sensors
- Deflectors
- Biomagnetic imaging scanners
- Desktop computers
- Biosafety cabinets
- Sublimation printers
- Physical conditioning treadmill exercisers
- Ultrasound imaging scanners
- Ultrasound indention probes
- Basic stamp microcontrollers
- Fluorescence microscopes
- Microcontrollers
- Arbitrary waveform generators
- Pulsating bubble surfactometers PBS
- Piezoelectric ceramic transducers
- Cardiovascular prosthetic device testers
- Optical traps
- Skinfold calipers
- Scanning probe microscopes SPM
- Centrifuges
- Microfluidic networks
- Servopneumatic axial test instruments
- Glass micromolds
- Posturographic measurement systems
- Spirometers
- Gas flow control systems
- Polygraph recorders
- Dynamometers
- Soft materials in-vitro simulation system
- Intravenous IV pump analyzers
- Ventilator performance analyzers
- Incubators
- Microvalves
- Immuno-sensors
- Biomimetic robots
- Endovascular stent-graft testing instruments
- Bio-signal amplifiers
- Insole sensors
- Two-point discriminators
- Plasma excitation chambers
- Isolators
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Microplate washers
- Micropumps
- Servopneumatic actuators
- 3T scanners
- Bio-signal simulators
- Positron emission tomography PET scanners
- Fourier transform infrared FTIR spectrometers
- Frequency shifters
- Milling machines
- Grip dynamometers
- Bioreactors
- Acousto-optic modulators
- Optical tomographic imaging scanners
- Polymer matrices
- Prosthetic limb testers
- Pacemaker analyzers
- Opto-electronic electrogoniometers
- Maskless photolithography equipment
- Micromanipulation microrheology microscopes
- Cone-plate viscometers
- Digital sonomicrometers
- Flow control devices
- Impact testers
- Pressure transducers
- Ultrasound wattmeters
- Electroencephalography EEG equipment
- Footswitch sensors
- Multimeters
- Molecular vacuum pumps
- Electromyographs EMG
- Pacemaker testing devices
- Material tension/compression testing devices
- Single photon emission computed tomography SPECT scanners
- Radiation compliance testing devices
- Micromolding lithography equipment
- Microplate readers
- Load sensors
- Laser ablation machines
- Finger joint flexure testers
- Anthropometers
- Patient monitoring testing devices
- High-speed digital cameras
- X ray lithography equipment
- Polymer scaffolds
- Bio-sensors
- Material fatigue and dynamics characterization devices
- Biomedical device electrical safety testers
- Multi-axis kinematic knee simulators
- Grass stimulators
- Sterilization-in-place equipment
- Medical radiation dosimeters
- Electrode pullers
- Axial-torsional testing systems
- Superconducting quantum interference devices SQUID
- Electrical particle detectors
- Incubator performance analyzers
- Spine simulators
- Spinal disk implant wear testers
- Pressure and temperature measurement devices
- Plastic injection molding machines
- X ray machines
- Circuit analyzers
- Dissolved oxygen polarographic measurement devices
- Ultrasound transducers
- Radio frequency amplifiers
- Non-invasive blood pressure monitor analyzers
- Electrode bevelers
- Environmental conditions measurement devices
- Eye tracking devices
- Laptop computers
- Defibrillator testing devices
- Microelectrodes
- Strain gauge conditioners
- Electronic design automation EDA software
- Reliability centered maintenance RCM software
- ANSYS
- Mathsoft Mathcad
- Minitab
- Three-dimensional motion capture software
- IBM Rational ClearQuest
- The MathWorks MATLAB
- Microsoft Project
- National Instruments LabVIEW
- Force sensitive applications FSA software
- Instrument validation software
- Defect tracking software
- Hypertext markup language HTML
- Medical information software
- OrCAD Capture
- Mentor Graphics
- Finite element method FEM software
- Molecular simulation software
- Electromechanical testing analysis software
- IBM Rational ClearCase
- Preventive maintenance software
- Numerical analysis software
- Computer aided design CAD software
- Requirements management software
- Microsoft Office
- Mean time between failures MBTF software
- Embedded systems testing software
- Rapid prototyping software
- Criticality analysis software
- IBM Rational RequisitePro
- Motion analysis software
- Neural network modeling software
- Cadence Encounter Test
- Electromyograph analysis software
- SAP BusinessObjects Crystal Reports
- Microsoft PowerPoint
- Extensible markup language XML
- Stochastic modeling software
- PTC Pro/ENGINEER Wildfire
- Cadence Allegro Design Entry Capture and Capture CIS
- Project estimation software
- Image analysis software
- System testing software
- Failure mode and effects analysis FMEA software
- Functional modeling software
- Circuit simulation software
- Biomechanical modeling software
- Force platform software
- Common cause failure assessment software
- Fourier transform infrared FTIR software
- Computer aided manufacturing CAM software
- Schematic design entry software
- Instrument control software
- Charting software
- Calculating optimum maintenance parameters COMPARE
- C++
- JavaScript
- Zuken
- ERP software
- SNOINO RCM Pro
- Computational fluid dynamics CFD software
- Dassault Systems SOLIDWORKS
- Stratasys FDM MedModeler
- Laboratory information management system LIMS
- Root cause analysis software
- Medical imaging software
- Rapid application development RAD software
- R
- Gait analysis software
- Simulation program with integrated circuit emphasis SPICE
- Materials testing software
- Microsoft Visual Basic
- Advanced computer simulation language ACSL
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- Test automation software
- Failure rate database software
- Computational modeling software
- Verilog
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Failure rate data in perspective FARADIP software
- C
- SNOINO Ttree
- Microsoft Excel
- Equipment compliance testing software
- Virtual instrument software
- Unified modeling language UML
- Dyadem FMEA Pro-6
- Hardware description language HDL
- Diagramming software
- Fault modeling software
- Microsoft Word
- Fault tree analysis FTA software
- Human modeling software
- Wolfram Research Mathematica
- Calibration software
- Technis BETAPLUS