Will “Biomedical Electronics Technician” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Biomedical Electronics Technician” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Electronics Technician
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Biomedical Electronics Technician”
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Conduct preventative maintenance on equipment.
- Adapt or design computer hardware or software for medical science uses.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Design and deliver technology to assist people with disabilities.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Keep documentation of service histories on all biomedical equipment.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Research new materials to be used for products, such as implanted artificial organs.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Advise and assist in the application of instrumentation in clinical environments.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Analyze new medical procedures to forecast likely outcomes.
Related Technology & Tools
- Pulse oximeters
- Servopneumatic actuators
- Pressure transducers
- Pacemaker testing devices
- Dynamometers
- Spine simulators
- Load sensors
- Bacteria-based biosensors
- Grass stimulators
- Electromyographs EMG
- Radiation compliance testing devices
- Endovascular stent-graft testing instruments
- Magnetic resonance imaging MRI systems
- Physical conditioning treadmill exercisers
- Non-invasive blood pressure monitor analyzers
- Grip dynamometers
- Polymerase chain reaction PCR equipment
- Impact testers
- Patient monitoring testing devices
- Pacemaker analyzers
- Multi-photon microscopes
- Microelectrodes
- Microplate washers
- Oscilloscopes
- Scanning probe microscopes SPM
- Pressure sensors
- Desktop computers
- X ray machines
- Bioreactors
- Optical coherence tomography OCT scanners
- Ultrasound wattmeters
- Deflectors
- Microvalves
- Centrifuges
- Material fatigue and dynamics characterization devices
- Strain gauge conditioners
- Finger joint flexure testers
- Rapid toxicity testing systems
- Anthropometers
- High-speed digital cameras
- Arbitrary waveform generators
- Radio frequency amplifiers
- Quantum-based switching applications Q-switch electron waveguides
- Posturographic measurement systems
- Micromanipulation microrheology microscopes
- Biomimetic robots
- Laser ablation machines
- Cone-plate viscometers
- Polymer scaffolds
- Gas flow control systems
- Hardness testing devices
- Opto-electronic electrogoniometers
- Servopneumatic axial test instruments
- Fourier transform infrared FTIR spectrometers
- Electrode pullers
- Biomedical device electrical safety testers
- Circuit analyzers
- Ultrasound indention probes
- Incubator performance analyzers
- Two-point discriminators
- Acousto-optic modulators
- Multimeters
- Biomagnetic imaging scanners
- Ultrasound imaging scanners
- Electroencephalography EEG equipment
- X ray lithography equipment
- Pulsating bubble surfactometers PBS
- Microplating equipment
- Molecular vacuum pumps
- Sterilization-in-place equipment
- Polymer matrices
- Spectrofluorimeters
- Multi-axis kinematic knee simulators
- Glass micromolds
- Soft materials in-vitro simulation system
- Plastic injection molding machines
- Material tension/compression testing devices
- Microplate readers
- Frequency shifters
- Superconducting quantum interference devices SQUID
- Microfluidic networks
- Electrical particle detectors
- Torsiometers
- Molecular cytosensors
- 3T scanners
- Intravenous IV pump analyzers
- Sublimation printers
- Immuno-sensors
- Spirometers
- Incubators
- Prosthetic limb testers
- Bio-sensors
- Functional magnetic resonance imaging fMRI scanners
- Optical tomographic imaging scanners
- Isolators
- Ventilator performance analyzers
- Cardiovascular prosthetic device testers
- Polygraph recorders
- Acoustic measurement systems
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Bio-signal amplifiers
- Basic stamp microcontrollers
- Accelerometers
- Environmental conditions measurement devices
- Plasma excitation chambers
- Microcontrollers
- Fluorescence microscopes
- Pinch gauges
- Single photon emission computed tomography SPECT scanners
- Micropumps
- Spinal disk implant wear testers
- Motion actuators
- Digital sonomicrometers
- Insole sensors
- Skinfold calipers
- Dissolved oxygen polarographic measurement devices
- Activity monitoring devices
- Maskless photolithography equipment
- Eye tracking devices
- Axial-torsional testing systems
- Electrosurgery testing devices
- Footswitch sensors
- Strain gauges
- Pressure and temperature measurement devices
- Positron emission tomography PET scanners
- Ultrasonic testing apparatus
- Flow control devices
- Milling machines
- Force platforms
- Electrode bevelers
- Micromolding lithography equipment
- Piezoelectric sensors
- Electroplating apparatus
- Bio-signal simulators
- Laptop computers
- Defibrillator testing devices
- Medical radiation dosimeters
- Ultrasound transducers
- Optical traps
- Piezoelectric ceramic transducers
- Biosafety cabinets
- Optical particle detectors
- Human modeling software
- Hypertext markup language HTML
- Computer aided design CAD software
- ANSYS
- Medical information software
- ERP software
- Instrument control software
- SNOINO RCM Pro
- Force platform software
- Fault modeling software
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- IBM Rational ClearQuest
- Gait analysis software
- Molecular simulation software
- System testing software
- Zuken
- Advanced computer simulation language ACSL
- Calibration software
- Computational fluid dynamics CFD software
- PTC Pro/ENGINEER Wildfire
- Mathsoft Mathcad
- Rapid application development RAD software
- Microsoft Office
- Embedded systems testing software
- Simulation program with integrated circuit emphasis SPICE
- Equipment compliance testing software
- Dassault Systems SOLIDWORKS
- Verilog
- Common cause failure assessment software
- Three-dimensional motion capture software
- Calculating optimum maintenance parameters COMPARE
- Microsoft Visual Basic
- Reliability centered maintenance RCM software
- Failure rate database software
- Finite element method FEM software
- Failure rate data in perspective FARADIP software
- The MathWorks MATLAB
- Preventive maintenance software
- Electromechanical testing analysis software
- Fourier transform infrared FTIR software
- Force sensitive applications FSA software
- Root cause analysis software
- Mentor Graphics
- Technis BETAPLUS
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Unified modeling language UML
- Image analysis software
- Numerical analysis software
- Extensible markup language XML
- Hardware description language HDL
- Functional modeling software
- Project estimation software
- Stratasys FDM MedModeler
- Wolfram Research Mathematica
- Electronic design automation EDA software
- Microsoft Excel
- Computer aided manufacturing CAM software
- Fault tree analysis FTA software
- Microsoft PowerPoint
- Microsoft Word
- Failure mode and effects analysis FMEA software
- IBM Rational ClearCase
- Minitab
- Virtual instrument software
- Diagramming software
- Circuit simulation software
- C++
- Biomechanical modeling software
- Dyadem FMEA Pro-6
- SNOINO Ttree
- Rapid prototyping software
- National Instruments LabVIEW
- Microsoft Project
- Motion analysis software
- Requirements management software
- Instrument validation software
- Laboratory information management system LIMS
- Materials testing software
- Test automation software
- Criticality analysis software
- Medical imaging software
- Schematic design entry software
- IBM Rational RequisitePro
- Mean time between failures MBTF software
- Charting software
- Electromyograph analysis software
- Cadence Allegro Design Entry Capture and Capture CIS
- JavaScript
- Defect tracking software
- R
- Computational modeling software
- SAP BusinessObjects Crystal Reports
- C
- OrCAD Capture
- Neural network modeling software
- Cadence Encounter Test
- Stochastic modeling software