Will “Certified Orthotist” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Certified Orthotist” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Certified Orthotist”
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Research new materials to be used for products, such as implanted artificial organs.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Analyze new medical procedures to forecast likely outcomes.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Design and deliver technology to assist people with disabilities.
- Advise and assist in the application of instrumentation in clinical environments.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Adapt or design computer hardware or software for medical science uses.
- Keep documentation of service histories on all biomedical equipment.
- Conduct preventative maintenance on equipment.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
Related Technology & Tools
- Skinfold calipers
- Torsiometers
- Polymer matrices
- Endovascular stent-graft testing instruments
- High-speed digital cameras
- X ray machines
- Biomedical device electrical safety testers
- Spine simulators
- Electromyographs EMG
- Piezoelectric ceramic transducers
- Biomagnetic imaging scanners
- Multimeters
- Prosthetic limb testers
- Glass micromolds
- Optical coherence tomography OCT scanners
- Pinch gauges
- Fourier transform infrared FTIR spectrometers
- Radiation compliance testing devices
- Basic stamp microcontrollers
- Electrode bevelers
- Physical conditioning treadmill exercisers
- Grip dynamometers
- Micropumps
- Axial-torsional testing systems
- Pulsating bubble surfactometers PBS
- Micromanipulation microrheology microscopes
- Strain gauges
- Magnetic resonance imaging MRI systems
- Polygraph recorders
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Multi-axis kinematic knee simulators
- Soft materials in-vitro simulation system
- Hardness testing devices
- Milling machines
- Electrode pullers
- Strain gauge conditioners
- Polymerase chain reaction PCR equipment
- Bio-signal simulators
- Spirometers
- Rapid toxicity testing systems
- Sublimation printers
- Microelectrodes
- Centrifuges
- Plastic injection molding machines
- Microfluidic networks
- Optical tomographic imaging scanners
- Anthropometers
- Servopneumatic axial test instruments
- Eye tracking devices
- Optical particle detectors
- 3T scanners
- Desktop computers
- Pressure and temperature measurement devices
- Molecular vacuum pumps
- Material fatigue and dynamics characterization devices
- Servopneumatic actuators
- Medical radiation dosimeters
- Laptop computers
- Ultrasound imaging scanners
- Microcontrollers
- Spectrofluorimeters
- Digital sonomicrometers
- Load sensors
- Pressure transducers
- Circuit analyzers
- Incubator performance analyzers
- Polymer scaffolds
- Pacemaker testing devices
- Cone-plate viscometers
- Bacteria-based biosensors
- Dynamometers
- Electroencephalography EEG equipment
- Pressure sensors
- Bioreactors
- Non-invasive blood pressure monitor analyzers
- Arbitrary waveform generators
- Deflectors
- Bio-signal amplifiers
- Fluorescence microscopes
- Dissolved oxygen polarographic measurement devices
- Ultrasound wattmeters
- Biomimetic robots
- Spinal disk implant wear testers
- Molecular cytosensors
- Microvalves
- Acoustic measurement systems
- Bio-sensors
- Sterilization-in-place equipment
- Isolators
- Pulse oximeters
- Electrosurgery testing devices
- Acousto-optic modulators
- Patient monitoring testing devices
- Intravenous IV pump analyzers
- Quantum-based switching applications Q-switch electron waveguides
- Biosafety cabinets
- Posturographic measurement systems
- Impact testers
- Oscilloscopes
- Electrical particle detectors
- Single photon emission computed tomography SPECT scanners
- Piezoelectric sensors
- Microplating equipment
- Multi-photon microscopes
- Defibrillator testing devices
- Cardiovascular prosthetic device testers
- Insole sensors
- Material tension/compression testing devices
- Immuno-sensors
- Positron emission tomography PET scanners
- Flow control devices
- Two-point discriminators
- Electroplating apparatus
- Force platforms
- Ultrasonic testing apparatus
- Incubators
- Laser ablation machines
- Frequency shifters
- Environmental conditions measurement devices
- Grass stimulators
- Optical traps
- Radio frequency amplifiers
- Pacemaker analyzers
- Gas flow control systems
- Activity monitoring devices
- Superconducting quantum interference devices SQUID
- Scanning probe microscopes SPM
- Opto-electronic electrogoniometers
- Footswitch sensors
- Microplate washers
- Functional magnetic resonance imaging fMRI scanners
- Plasma excitation chambers
- Finger joint flexure testers
- X ray lithography equipment
- Ultrasound indention probes
- Accelerometers
- Maskless photolithography equipment
- Motion actuators
- Micromolding lithography equipment
- Ultrasound transducers
- Microplate readers
- Ventilator performance analyzers
- Electronic design automation EDA software
- Functional modeling software
- C
- Microsoft Project
- Stochastic modeling software
- Circuit simulation software
- Failure rate data in perspective FARADIP software
- Technis BETAPLUS
- Computational modeling software
- Calibration software
- Electromyograph analysis software
- Calculating optimum maintenance parameters COMPARE
- Three-dimensional motion capture software
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- Hardware description language HDL
- Mathsoft Mathcad
- Charting software
- Rapid prototyping software
- Cadence Allegro Design Entry Capture and Capture CIS
- Failure rate database software
- IBM Rational ClearQuest
- Unified modeling language UML
- Mean time between failures MBTF software
- Minitab
- Advanced computer simulation language ACSL
- Microsoft Visual Basic
- Equipment compliance testing software
- Biomechanical modeling software
- Stratasys FDM MedModeler
- Dassault Systems SOLIDWORKS
- Test automation software
- Image analysis software
- Numerical analysis software
- Motion analysis software
- Diagramming software
- Human modeling software
- Microsoft Word
- JavaScript
- Force platform software
- Failure mode and effects analysis FMEA software
- Laboratory information management system LIMS
- Computer aided design CAD software
- Microsoft Excel
- Computational fluid dynamics CFD software
- Project estimation software
- Finite element method FEM software
- SNOINO Ttree
- Preventive maintenance software
- SNOINO RCM Pro
- Root cause analysis software
- Instrument validation software
- Dyadem FMEA Pro-6
- Molecular simulation software
- Embedded systems testing software
- IBM Rational RequisitePro
- OrCAD Capture
- Fourier transform infrared FTIR software
- Zuken
- Medical imaging software
- Cadence Encounter Test
- PTC Pro/ENGINEER Wildfire
- Verilog
- Wolfram Research Mathematica
- SAP BusinessObjects Crystal Reports
- Virtual instrument software
- Extensible markup language XML
- Reliability centered maintenance RCM software
- C++
- Mentor Graphics
- Schematic design entry software
- ANSYS
- Hypertext markup language HTML
- Neural network modeling software
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Requirements management software
- IBM Rational ClearCase
- System testing software
- Criticality analysis software
- Force sensitive applications FSA software
- Gait analysis software
- Fault tree analysis FTA software
- Instrument control software
- National Instruments LabVIEW
- Common cause failure assessment software
- The MathWorks MATLAB
- Computer aided manufacturing CAM software
- ERP software
- R
- Fault modeling software
- Simulation program with integrated circuit emphasis SPICE
- Microsoft PowerPoint
- Rapid application development RAD software
- Microsoft Office
- Materials testing software
- Medical information software
- Defect tracking software
- Electromechanical testing analysis software