Will “Supplier Quality Engineer (SQE)” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Supplier Quality Engineer (SQE)” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Supplier Quality Engineer (SQE)”
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Design and deliver technology to assist people with disabilities.
- Analyze new medical procedures to forecast likely outcomes.
- Advise and assist in the application of instrumentation in clinical environments.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Conduct preventative maintenance on equipment.
- Keep documentation of service histories on all biomedical equipment.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Adapt or design computer hardware or software for medical science uses.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Research new materials to be used for products, such as implanted artificial organs.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Diagnose and interpret bioelectric data, using signal processing techniques.
Related Technology & Tools
- Spine simulators
- Bio-signal simulators
- Pressure transducers
- Molecular cytosensors
- Multi-photon microscopes
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Environmental conditions measurement devices
- Material tension/compression testing devices
- Bioreactors
- Impact testers
- Multimeters
- Polymer scaffolds
- Optical tomographic imaging scanners
- Radiation compliance testing devices
- Digital sonomicrometers
- Multi-axis kinematic knee simulators
- Cardiovascular prosthetic device testers
- Acoustic measurement systems
- Milling machines
- Physical conditioning treadmill exercisers
- Polymerase chain reaction PCR equipment
- Circuit analyzers
- Strain gauges
- Acousto-optic modulators
- Defibrillator testing devices
- Cone-plate viscometers
- Grip dynamometers
- Desktop computers
- Ultrasound transducers
- Laptop computers
- Electroplating apparatus
- Positron emission tomography PET scanners
- Non-invasive blood pressure monitor analyzers
- Incubator performance analyzers
- Endovascular stent-graft testing instruments
- Strain gauge conditioners
- Sterilization-in-place equipment
- Isolators
- Ventilator performance analyzers
- Pressure sensors
- Electroencephalography EEG equipment
- Force platforms
- Accelerometers
- Ultrasound wattmeters
- Skinfold calipers
- Spinal disk implant wear testers
- Servopneumatic axial test instruments
- Biomimetic robots
- Pressure and temperature measurement devices
- Fourier transform infrared FTIR spectrometers
- Microplate washers
- Optical traps
- Basic stamp microcontrollers
- Torsiometers
- Glass micromolds
- Medical radiation dosimeters
- Electrode pullers
- Axial-torsional testing systems
- Magnetic resonance imaging MRI systems
- Laser ablation machines
- Optical particle detectors
- Single photon emission computed tomography SPECT scanners
- Posturographic measurement systems
- Biomedical device electrical safety testers
- Superconducting quantum interference devices SQUID
- Pulse oximeters
- Patient monitoring testing devices
- Molecular vacuum pumps
- Electrosurgery testing devices
- Pacemaker testing devices
- Footswitch sensors
- Arbitrary waveform generators
- Scanning probe microscopes SPM
- Activity monitoring devices
- Dynamometers
- Deflectors
- Incubators
- Ultrasonic testing apparatus
- High-speed digital cameras
- Intravenous IV pump analyzers
- Two-point discriminators
- Opto-electronic electrogoniometers
- Dissolved oxygen polarographic measurement devices
- Spectrofluorimeters
- Plasma excitation chambers
- Material fatigue and dynamics characterization devices
- Oscilloscopes
- Centrifuges
- Rapid toxicity testing systems
- Ultrasound indention probes
- Electrical particle detectors
- Prosthetic limb testers
- Micromanipulation microrheology microscopes
- Micromolding lithography equipment
- Sublimation printers
- Finger joint flexure testers
- Radio frequency amplifiers
- Piezoelectric sensors
- Anthropometers
- Soft materials in-vitro simulation system
- Micropumps
- Gas flow control systems
- Maskless photolithography equipment
- Flow control devices
- Polymer matrices
- Hardness testing devices
- Frequency shifters
- Piezoelectric ceramic transducers
- X ray lithography equipment
- Servopneumatic actuators
- Biomagnetic imaging scanners
- Polygraph recorders
- 3T scanners
- Microcontrollers
- Electromyographs EMG
- Electrode bevelers
- Bio-sensors
- Spirometers
- X ray machines
- Functional magnetic resonance imaging fMRI scanners
- Microplate readers
- Motion actuators
- Microelectrodes
- Eye tracking devices
- Insole sensors
- Fluorescence microscopes
- Microplating equipment
- Optical coherence tomography OCT scanners
- Bio-signal amplifiers
- Bacteria-based biosensors
- Grass stimulators
- Pacemaker analyzers
- Ultrasound imaging scanners
- Immuno-sensors
- Plastic injection molding machines
- Pulsating bubble surfactometers PBS
- Microvalves
- Quantum-based switching applications Q-switch electron waveguides
- Microfluidic networks
- Load sensors
- Pinch gauges
- Biosafety cabinets
- Biomechanical modeling software
- R
- Computational fluid dynamics CFD software
- The MathWorks MATLAB
- Force sensitive applications FSA software
- Circuit simulation software
- Rapid application development RAD software
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- Motion analysis software
- Reliability centered maintenance RCM software
- Equipment compliance testing software
- Microsoft PowerPoint
- Fourier transform infrared FTIR software
- Wolfram Research Mathematica
- Fault tree analysis FTA software
- Finite element method FEM software
- Medical imaging software
- JavaScript
- Failure rate database software
- Human modeling software
- Simulation program with integrated circuit emphasis SPICE
- Fault modeling software
- IBM Rational ClearCase
- Dyadem FMEA Pro-6
- Preventive maintenance software
- Materials testing software
- Failure rate data in perspective FARADIP software
- ERP software
- Cadence Allegro Design Entry Capture and Capture CIS
- Stratasys FDM MedModeler
- Mean time between failures MBTF software
- Extensible markup language XML
- Medical information software
- Project estimation software
- Zuken
- Cadence Encounter Test
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Failure mode and effects analysis FMEA software
- Requirements management software
- Schematic design entry software
- Microsoft Visual Basic
- Mathsoft Mathcad
- OrCAD Capture
- Criticality analysis software
- Microsoft Word
- Stochastic modeling software
- Common cause failure assessment software
- Hardware description language HDL
- Gait analysis software
- System testing software
- Embedded systems testing software
- C
- Test automation software
- Laboratory information management system LIMS
- Electromechanical testing analysis software
- Functional modeling software
- Microsoft Office
- Charting software
- Microsoft Excel
- Hypertext markup language HTML
- Calculating optimum maintenance parameters COMPARE
- Electromyograph analysis software
- Advanced computer simulation language ACSL
- Instrument validation software
- Technis BETAPLUS
- Unified modeling language UML
- SNOINO Ttree
- Mentor Graphics
- Numerical analysis software
- Minitab
- Force platform software
- Three-dimensional motion capture software
- Electronic design automation EDA software
- Dassault Systems SOLIDWORKS
- IBM Rational RequisitePro
- PTC Pro/ENGINEER Wildfire
- Neural network modeling software
- Calibration software
- National Instruments LabVIEW
- Virtual instrument software
- Verilog
- Molecular simulation software
- ANSYS
- Defect tracking software
- IBM Rational ClearQuest
- Diagramming software
- Instrument control software
- Microsoft Project
- Computational modeling software
- Computer aided manufacturing CAM software
- SNOINO RCM Pro
- Computer aided design CAD software
- SAP BusinessObjects Crystal Reports
- C++
- Root cause analysis software
- Rapid prototyping software
- Image analysis software