Will “Imaging Engineer” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Imaging Engineer” will not be replaced by robots.
This job is ranked #120 out of #702, where higher means less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Imaging Engineer”
- Analyze new medical procedures to forecast likely outcomes.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Conduct preventative maintenance on equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Design and deliver technology to assist people with disabilities.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Adapt or design computer hardware or software for medical science uses.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Research new materials to be used for products, such as implanted artificial organs.
- Keep documentation of service histories on all biomedical equipment.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Advise and assist in the application of instrumentation in clinical environments.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
Related Technology & Tools
- Acoustic measurement systems
- Microvalves
- Molecular vacuum pumps
- Spinal disk implant wear testers
- Single photon emission computed tomography SPECT scanners
- Pacemaker testing devices
- Pinch gauges
- Immuno-sensors
- Microfluidic networks
- Patient monitoring testing devices
- Magnetic resonance imaging MRI systems
- Anthropometers
- Glass micromolds
- Accelerometers
- Strain gauges
- Strain gauge conditioners
- Optical traps
- Isolators
- Optical coherence tomography OCT scanners
- Desktop computers
- Optical particle detectors
- Electrode bevelers
- Oscilloscopes
- Basic stamp microcontrollers
- Piezoelectric sensors
- Electroencephalography EEG equipment
- Cardiovascular prosthetic device testers
- Pressure and temperature measurement devices
- Bio-signal simulators
- Two-point discriminators
- Milling machines
- Motion actuators
- Circuit analyzers
- Deflectors
- Plastic injection molding machines
- Electrosurgery testing devices
- Electromyographs EMG
- Electrode pullers
- Plasma excitation chambers
- Multimeters
- Biomagnetic imaging scanners
- Digital sonomicrometers
- Endovascular stent-graft testing instruments
- Incubator performance analyzers
- Ultrasound imaging scanners
- Pulse oximeters
- Fourier transform infrared FTIR spectrometers
- Eye tracking devices
- Impact testers
- Microcontrollers
- Hardness testing devices
- Sterilization-in-place equipment
- Servopneumatic axial test instruments
- Defibrillator testing devices
- Radiation compliance testing devices
- Optical tomographic imaging scanners
- Footswitch sensors
- Physical conditioning treadmill exercisers
- Microelectrodes
- Load sensors
- Ventilator performance analyzers
- Dissolved oxygen polarographic measurement devices
- Sublimation printers
- Fluorescence microscopes
- Pacemaker analyzers
- Environmental conditions measurement devices
- X ray machines
- Material fatigue and dynamics characterization devices
- X ray lithography equipment
- Ultrasound wattmeters
- Frequency shifters
- Prosthetic limb testers
- Functional magnetic resonance imaging fMRI scanners
- Spine simulators
- Arbitrary waveform generators
- Bacteria-based biosensors
- Micromolding lithography equipment
- Intravenous IV pump analyzers
- Pressure transducers
- Dynamometers
- Medical radiation dosimeters
- Polygraph recorders
- Electroplating apparatus
- Bio-sensors
- Superconducting quantum interference devices SQUID
- Spectrofluorimeters
- Non-invasive blood pressure monitor analyzers
- Incubators
- Torsiometers
- Laser ablation machines
- Piezoelectric ceramic transducers
- Biomedical device electrical safety testers
- Ultrasonic testing apparatus
- Scanning probe microscopes SPM
- Micropumps
- Grass stimulators
- Gas flow control systems
- Flow control devices
- Microplate washers
- Bio-signal amplifiers
- Microplating equipment
- Pressure sensors
- Polymerase chain reaction PCR equipment
- Radio frequency amplifiers
- Electrical particle detectors
- Opto-electronic electrogoniometers
- Ultrasound transducers
- Posturographic measurement systems
- Soft materials in-vitro simulation system
- Grip dynamometers
- Insole sensors
- Polymer matrices
- Micromanipulation microrheology microscopes
- Biomimetic robots
- Finger joint flexure testers
- Multi-photon microscopes
- Force platforms
- Maskless photolithography equipment
- Skinfold calipers
- Positron emission tomography PET scanners
- Multi-axis kinematic knee simulators
- Pulsating bubble surfactometers PBS
- Cone-plate viscometers
- Activity monitoring devices
- Molecular cytosensors
- Rapid toxicity testing systems
- Bioreactors
- Material tension/compression testing devices
- Axial-torsional testing systems
- High-speed digital cameras
- 3T scanners
- Biosafety cabinets
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Quantum-based switching applications Q-switch electron waveguides
- Microplate readers
- Acousto-optic modulators
- Laptop computers
- Centrifuges
- Spirometers
- Polymer scaffolds
- Ultrasound indention probes
- Servopneumatic actuators
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Microsoft Office
- SNOINO Ttree
- Fault modeling software
- Molecular simulation software
- System testing software
- Stratasys FDM MedModeler
- Laboratory information management system LIMS
- Common cause failure assessment software
- Project estimation software
- Stochastic modeling software
- Criticality analysis software
- Root cause analysis software
- C++
- Extensible markup language XML
- Neural network modeling software
- Dassault Systems SOLIDWORKS
- Image analysis software
- Fourier transform infrared FTIR software
- Defect tracking software
- Instrument validation software
- Failure mode and effects analysis FMEA software
- National Instruments LabVIEW
- R
- Requirements management software
- IBM Rational RequisitePro
- Cadence Allegro Design Entry Capture and Capture CIS
- OrCAD Capture
- Force sensitive applications FSA software
- Mathsoft Mathcad
- Virtual instrument software
- Microsoft Word
- Computer aided manufacturing CAM software
- Unified modeling language UML
- Charting software
- Computer aided design CAD software
- Diagramming software
- Dyadem FMEA Pro-6
- Reliability centered maintenance RCM software
- Microsoft Visual Basic
- Force platform software
- Finite element method FEM software
- Microsoft Excel
- Human modeling software
- Advanced computer simulation language ACSL
- Instrument control software
- SAP BusinessObjects Crystal Reports
- Preventive maintenance software
- Computational modeling software
- Hardware description language HDL
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- Embedded systems testing software
- Test automation software
- Calibration software
- Wolfram Research Mathematica
- Medical imaging software
- IBM Rational ClearCase
- Electronic design automation EDA software
- Microsoft Project
- SNOINO RCM Pro
- Failure rate data in perspective FARADIP software
- Mean time between failures MBTF software
- Failure rate database software
- Medical information software
- Equipment compliance testing software
- Biomechanical modeling software
- Calculating optimum maintenance parameters COMPARE
- ERP software
- ANSYS
- Electromechanical testing analysis software
- Materials testing software
- Cadence Encounter Test
- IBM Rational ClearQuest
- Numerical analysis software
- Electromyograph analysis software
- Technis BETAPLUS
- Zuken
- JavaScript
- Mentor Graphics
- Rapid application development RAD software
- PTC Pro/ENGINEER Wildfire
- Minitab
- Three-dimensional motion capture software
- Microsoft PowerPoint
- C
- Motion analysis software
- Schematic design entry software
- Hypertext markup language HTML
- Simulation program with integrated circuit emphasis SPICE
- Gait analysis software
- Verilog
- Computational fluid dynamics CFD software
- Rapid prototyping software
- Fault tree analysis FTA software
- Functional modeling software
- The MathWorks MATLAB
- Circuit simulation software