Will “Biomedical Engineers” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Biomedical Engineers” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
Also Known As…
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Biomedical Engineers”
- Design and deliver technology to assist people with disabilities.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Conduct preventative maintenance on equipment.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Advise and assist in the application of instrumentation in clinical environments.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Research new materials to be used for products, such as implanted artificial organs.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Analyze new medical procedures to forecast likely outcomes.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Keep documentation of service histories on all biomedical equipment.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Adapt or design computer hardware or software for medical science uses.
Related Technology & Tools
- Micromanipulation microrheology microscopes
- Fluorescence microscopes
- Motion actuators
- Optical particle detectors
- Plastic injection molding machines
- Electroplating apparatus
- Dissolved oxygen polarographic measurement devices
- Polygraph recorders
- Radiation compliance testing devices
- Footswitch sensors
- Microelectrodes
- Servopneumatic actuators
- Single photon emission computed tomography SPECT scanners
- Magnetic resonance imaging MRI systems
- Anthropometers
- Biomimetic robots
- Scanning probe microscopes SPM
- Ultrasound wattmeters
- Spine simulators
- Eye tracking devices
- Electroencephalography EEG equipment
- Polymerase chain reaction PCR equipment
- Positron emission tomography PET scanners
- Glass micromolds
- Piezoelectric ceramic transducers
- Optical tomographic imaging scanners
- Axial-torsional testing systems
- Force platforms
- Intravenous IV pump analyzers
- Centrifuges
- Pressure sensors
- Pulse oximeters
- Material fatigue and dynamics characterization devices
- Bacteria-based biosensors
- Laptop computers
- Grass stimulators
- Basic stamp microcontrollers
- Hardness testing devices
- Sterilization-in-place equipment
- Flow control devices
- Optical coherence tomography OCT scanners
- Activity monitoring devices
- Multi-photon microscopes
- Pressure transducers
- Biomagnetic imaging scanners
- Electrode bevelers
- Micromolding lithography equipment
- Strain gauges
- Ultrasound imaging scanners
- Micropumps
- Microplating equipment
- Material tension/compression testing devices
- Non-invasive blood pressure monitor analyzers
- Physical conditioning treadmill exercisers
- Ultrasonic testing apparatus
- Biosafety cabinets
- Ultrasound transducers
- Endovascular stent-graft testing instruments
- Laser ablation machines
- Bio-sensors
- Electromyographs EMG
- Spirometers
- Immuno-sensors
- 3T scanners
- X ray machines
- Microvalves
- Patient monitoring testing devices
- Impact testers
- Milling machines
- Pressure and temperature measurement devices
- Functional magnetic resonance imaging fMRI scanners
- Posturographic measurement systems
- Deflectors
- Bioreactors
- Pacemaker testing devices
- Medical radiation dosimeters
- X ray lithography equipment
- Radio frequency amplifiers
- Servopneumatic axial test instruments
- Fourier transform infrared FTIR spectrometers
- Grip dynamometers
- Accelerometers
- Prosthetic limb testers
- Spinal disk implant wear testers
- Strain gauge conditioners
- Frequency shifters
- Ventilator performance analyzers
- Ultrasound indention probes
- Bio-signal amplifiers
- Oscilloscopes
- Rapid toxicity testing systems
- Finger joint flexure testers
- Opto-electronic electrogoniometers
- Plasma excitation chambers
- Load sensors
- Incubator performance analyzers
- Polymer matrices
- Insole sensors
- Acousto-optic modulators
- Circuit analyzers
- Arbitrary waveform generators
- High-speed digital cameras
- Quantum-based switching applications Q-switch electron waveguides
- Digital sonomicrometers
- Incubators
- Cone-plate viscometers
- Maskless photolithography equipment
- Spectrofluorimeters
- Multi-axis kinematic knee simulators
- Isolators
- Pulsating bubble surfactometers PBS
- Electrical particle detectors
- Acoustic measurement systems
- Desktop computers
- Microcontrollers
- Soft materials in-vitro simulation system
- Piezoelectric sensors
- Cardiovascular prosthetic device testers
- Polymer scaffolds
- Defibrillator testing devices
- Microplate readers
- Torsiometers
- Environmental conditions measurement devices
- Sublimation printers
- Molecular vacuum pumps
- Skinfold calipers
- Microfluidic networks
- Molecular cytosensors
- Optical traps
- Pinch gauges
- Electrode pullers
- Gas flow control systems
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Dynamometers
- Two-point discriminators
- Multimeters
- Electrosurgery testing devices
- Microplate washers
- Bio-signal simulators
- Biomedical device electrical safety testers
- Pacemaker analyzers
- Superconducting quantum interference devices SQUID
- Verilog
- SAP BusinessObjects Crystal Reports
- C++
- IBM Rational ClearQuest
- Rapid application development RAD software
- Cadence Encounter Test
- Failure rate data in perspective FARADIP software
- Electromyograph analysis software
- The MathWorks MATLAB
- Electronic design automation EDA software
- Electromechanical testing analysis software
- IBM Rational ClearCase
- Zuken
- Unified modeling language UML
- Stochastic modeling software
- Circuit simulation software
- Computer aided manufacturing CAM software
- Root cause analysis software
- Dyadem FMEA Pro-6
- National Instruments LabVIEW
- Fourier transform infrared FTIR software
- Calibration software
- R
- Hypertext markup language HTML
- Laboratory information management system LIMS
- Diagramming software
- Common cause failure assessment software
- Finite element method FEM software
- Neural network modeling software
- Technis BETAPLUS
- Motion analysis software
- Reliability centered maintenance RCM software
- Embedded systems testing software
- Dassault Systems SOLIDWORKS
- Computer aided design CAD software
- Medical information software
- PTC Pro/ENGINEER Wildfire
- Microsoft Excel
- Functional modeling software
- C
- Instrument validation software
- Hardware description language HDL
- Project estimation software
- Biomechanical modeling software
- Advanced computer simulation language ACSL
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- Medical imaging software
- Virtual instrument software
- System testing software
- Wolfram Research Mathematica
- Fault modeling software
- Mentor Graphics
- Minitab
- Microsoft Office
- Force platform software
- Force sensitive applications FSA software
- ERP software
- Rapid prototyping software
- Test automation software
- Stratasys FDM MedModeler
- Three-dimensional motion capture software
- JavaScript
- Mean time between failures MBTF software
- Microsoft Word
- SNOINO Ttree
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Computational fluid dynamics CFD software
- Equipment compliance testing software
- Image analysis software
- Preventive maintenance software
- Calculating optimum maintenance parameters COMPARE
- Schematic design entry software
- Mathsoft Mathcad
- OrCAD Capture
- Materials testing software
- Microsoft PowerPoint
- Microsoft Project
- Requirements management software
- IBM Rational RequisitePro
- Computational modeling software
- Gait analysis software
- Failure mode and effects analysis FMEA software
- SNOINO RCM Pro
- ANSYS
- Numerical analysis software
- Criticality analysis software
- Instrument control software
- Fault tree analysis FTA software
- Charting software
- Molecular simulation software
- Microsoft Visual Basic
- Simulation program with integrated circuit emphasis SPICE
- Cadence Allegro Design Entry Capture and Capture CIS
- Defect tracking software
- Human modeling software
- Failure rate database software
- Extensible markup language XML