Will “Dialysis Engineer” be Replaced By Robots? 🤔

3.7% Chance of Automation

“Dialysis Engineer” will not be replaced by robots.

This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.

Job Details

The SOC (Standard Occupational Classification) code is 17-2031.00
The Mean Annual Wage in the U.S. is $ 89,970.00
The Mean Hourly Wage is $ 43.00
Currently, there are 20,590 people on this job

☝️ Information based on the reference occupation “Biomedical Engineers”.

Also Known As…

Tasks for “Dialysis Engineer”

Analyze new medical procedures to forecast likely outcomes.
Adapt or design computer hardware or software for medical science uses.
Conduct preventative maintenance on equipment.
Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
Develop new applications for energy sources, such as using nuclear power for biomedical implants.
Advise and assist in the application of instrumentation in clinical environments.
Advise hospital administrators on the planning, acquisition, and use of medical equipment.
Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
Keep documentation of service histories on all biomedical equipment.
Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
Design and deliver technology to assist people with disabilities.
Research new materials to be used for products, such as implanted artificial organs.
Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
Diagnose and interpret bioelectric data, using signal processing techniques.

Related Technology & Tools

Electrical particle detectors
Environmental conditions measurement devices
Biomimetic robots
Bio-sensors
Sterilization-in-place equipment
Laptop computers
Immuno-sensors
Pressure transducers
Desktop computers
Molecular vacuum pumps
Biomagnetic imaging scanners
Spirometers
Maskless photolithography equipment
Micromolding lithography equipment
Incubator performance analyzers
Endovascular stent-graft testing instruments
Biosafety cabinets
Circuit analyzers
Glass micromolds
Bacteria-based biosensors
Electrode pullers
Microcontrollers
Grip dynamometers
Polymerase chain reaction PCR equipment
Acousto-optic modulators
Milling machines
Medical radiation dosimeters
Optical coherence tomography OCT scanners
Functional magnetic resonance imaging fMRI scanners
Sublimation printers
Superconducting quantum interference devices SQUID
Eye tracking devices
Strain gauge conditioners
Frequency shifters
Strain gauges
Microelectrodes
Footswitch sensors
Spectrofluorimeters
Opto-electronic electrogoniometers
Pacemaker testing devices
Skinfold calipers
Polygraph recorders
Servopneumatic axial test instruments
Impact testers
Defibrillator testing devices
Magnetic resonance imaging MRI systems
Fluorescence microscopes
Force platforms
Microplating equipment
Soft materials in-vitro simulation system
Ultrasonic testing apparatus
Pressure sensors
Positron emission tomography PET scanners
Axial-torsional testing systems
Multi-photon microscopes
3T scanners
Servopneumatic actuators
Incubators
Biomedical device electrical safety testers
Spine simulators
Pinch gauges
Isolators
Electroencephalography EEG equipment
Optical tomographic imaging scanners
Pulsating bubble surfactometers PBS
Microvalves
Optical traps
Grass stimulators
Single photon emission computed tomography SPECT scanners
Electroplating apparatus
Flow control devices
Molecular cytosensors
Bio-signal amplifiers
Ultrasound imaging scanners
Piezoelectric sensors
Bioreactors
Plastic injection molding machines
Patient monitoring testing devices
Quantum-based switching applications Q-switch electron waveguides
X ray lithography equipment
Prosthetic limb testers
Deflectors
Bio-signal simulators
Microplate readers
Pacemaker analyzers
Piezoelectric ceramic transducers
Finger joint flexure testers
Intravenous IV pump analyzers
Torsiometers
Microplate washers
Ultrasound indention probes
Ultrasound transducers
Spinal disk implant wear testers
Oscilloscopes
Acoustic measurement systems
Arbitrary waveform generators
Polymer matrices
Ventilator performance analyzers
Rapid toxicity testing systems
Multi-axis kinematic knee simulators
Electromyographs EMG
Dynamometers
Anthropometers
Posturographic measurement systems
Digital sonomicrometers
Laser ablation machines
Physical conditioning treadmill exercisers
Hardness testing devices
High-speed digital cameras
Electrosurgery testing devices
Load sensors
Polymer scaffolds
Centrifuges
Basic stamp microcontrollers
Ultra high speed magnetic resonance imaging MRI scanner machines
Insole sensors
Electrode bevelers
Pulse oximeters
Ultrasound wattmeters
Accelerometers
X ray machines
Multimeters
Dissolved oxygen polarographic measurement devices
Cone-plate viscometers
Non-invasive blood pressure monitor analyzers
Radiation compliance testing devices
Optical particle detectors
Material tension/compression testing devices
Cardiovascular prosthetic device testers
Activity monitoring devices
Fourier transform infrared FTIR spectrometers
Material fatigue and dynamics characterization devices
Microfluidic networks
Radio frequency amplifiers
Two-point discriminators
Motion actuators
Micropumps
Pressure and temperature measurement devices
Gas flow control systems
Plasma excitation chambers
Scanning probe microscopes SPM
Micromanipulation microrheology microscopes

Mathsoft Mathcad
Failure mode and effects analysis FMEA software
Electromechanical testing analysis software
SNOINO Ttree
Requirements management software
Human modeling software
Medical information software
Computer aided design CAD software
C
Advanced computer simulation language ACSL
Virtual instrument software
IBM Rational ClearCase
Functional modeling software
Force platform software
Verilog
Unified modeling language UML
System testing software
Electromyograph analysis software
Minitab
National Instruments LabVIEW
IBM Rational RequisitePro
Rapid application development RAD software
Neural network modeling software
Microsoft Word
Microsoft Project
Embedded systems testing software
Mentor Graphics
Biomechanical modeling software
PTC Pro/ENGINEER Wildfire
ANSYS
Cadence Allegro Design Entry Capture and Capture CIS
Numerical analysis software
Instrument validation software
Fourier transform infrared FTIR software
JavaScript
Criticality analysis software
Laboratory information management system LIMS
Three-dimensional motion capture software
Image analysis software
Medical imaging software
Technis BETAPLUS
Common cause failure assessment software
SNOINO RCM Pro
Hardware description language HDL
Stochastic modeling software
Hypertext markup language HTML
OrCAD Capture
Microsoft Visual Basic
Project estimation software
Molecular simulation software
Hierarchical simulation program with integrated circuit emphasis HSPICE
Defect tracking software
Instrument control software
Failure rate data in perspective FARADIP software
The MathWorks MATLAB
Zuken
Calculating optimum maintenance parameters COMPARE
Finite element method FEM software
Cadence Encounter Test
Electronic design automation EDA software
Fault tree analysis FTA software
Motion analysis software
Failure rate database software
C++
ERP software
Mean time between failures MBTF software
Fault modeling software
IBM Rational ClearQuest
Rapid prototyping software
Microsoft Excel
Reliability centered maintenance RCM software
Materials testing software
Extensible markup language XML
Preventive maintenance software
Computer aided manufacturing CAM software
Gait analysis software
Calibration software
Computational fluid dynamics CFD software
Force sensitive applications FSA software
SAP BusinessObjects Crystal Reports
Charting software
Simulation program with integrated circuit emphasis SPICE
Microsoft Office
Root cause analysis software
Computational modeling software
R
Test automation software
Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
Stratasys FDM MedModeler
Diagramming software
Microsoft PowerPoint
Dassault Systems SOLIDWORKS
Circuit simulation software
Wolfram Research Mathematica
Schematic design entry software
Equipment compliance testing software
Dyadem FMEA Pro-6