Will “Project Engineer” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Project Engineer” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Project Engineer”
- Adapt or design computer hardware or software for medical science uses.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Research new materials to be used for products, such as implanted artificial organs.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Conduct preventative maintenance on equipment.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Keep documentation of service histories on all biomedical equipment.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Analyze new medical procedures to forecast likely outcomes.
- Design and deliver technology to assist people with disabilities.
- Advise and assist in the application of instrumentation in clinical environments.
Related Technology & Tools
- Eye tracking devices
- Maskless photolithography equipment
- Material fatigue and dynamics characterization devices
- Bioreactors
- Cardiovascular prosthetic device testers
- Piezoelectric sensors
- Insole sensors
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Microelectrodes
- Optical coherence tomography OCT scanners
- Bio-signal amplifiers
- Ultrasound wattmeters
- Servopneumatic actuators
- Multi-photon microscopes
- Accelerometers
- Incubator performance analyzers
- Electrosurgery testing devices
- Multimeters
- Sublimation printers
- Fourier transform infrared FTIR spectrometers
- Biosafety cabinets
- Optical tomographic imaging scanners
- Oscilloscopes
- Opto-electronic electrogoniometers
- Polymer matrices
- Grass stimulators
- Laptop computers
- Cone-plate viscometers
- Acousto-optic modulators
- Soft materials in-vitro simulation system
- Superconducting quantum interference devices SQUID
- Bio-signal simulators
- Environmental conditions measurement devices
- Dynamometers
- Circuit analyzers
- Glass micromolds
- Posturographic measurement systems
- Pulsating bubble surfactometers PBS
- Sterilization-in-place equipment
- Desktop computers
- Dissolved oxygen polarographic measurement devices
- Rapid toxicity testing systems
- Ultrasound transducers
- Incubators
- Activity monitoring devices
- Anthropometers
- Quantum-based switching applications Q-switch electron waveguides
- Footswitch sensors
- Ultrasonic testing apparatus
- Medical radiation dosimeters
- Micromolding lithography equipment
- Non-invasive blood pressure monitor analyzers
- Arbitrary waveform generators
- Molecular vacuum pumps
- Prosthetic limb testers
- Biomedical device electrical safety testers
- Piezoelectric ceramic transducers
- Isolators
- Skinfold calipers
- Pressure and temperature measurement devices
- Microvalves
- Axial-torsional testing systems
- Positron emission tomography PET scanners
- Electrical particle detectors
- Electroplating apparatus
- Ultrasound imaging scanners
- Basic stamp microcontrollers
- Load sensors
- Fluorescence microscopes
- X ray lithography equipment
- Torsiometers
- Hardness testing devices
- Molecular cytosensors
- Strain gauges
- Material tension/compression testing devices
- Defibrillator testing devices
- Ultrasound indention probes
- Milling machines
- Multi-axis kinematic knee simulators
- Plasma excitation chambers
- Microplate washers
- Endovascular stent-graft testing instruments
- Optical traps
- Optical particle detectors
- Spine simulators
- Microcontrollers
- Two-point discriminators
- Spinal disk implant wear testers
- Electroencephalography EEG equipment
- Servopneumatic axial test instruments
- Microfluidic networks
- Pressure sensors
- Biomagnetic imaging scanners
- Electrode pullers
- Physical conditioning treadmill exercisers
- Finger joint flexure testers
- Radio frequency amplifiers
- Plastic injection molding machines
- Patient monitoring testing devices
- Microplating equipment
- X ray machines
- Strain gauge conditioners
- Laser ablation machines
- Gas flow control systems
- Micropumps
- Frequency shifters
- Grip dynamometers
- Polymerase chain reaction PCR equipment
- Single photon emission computed tomography SPECT scanners
- Intravenous IV pump analyzers
- Scanning probe microscopes SPM
- Pacemaker testing devices
- Spirometers
- Flow control devices
- Polymer scaffolds
- Electrode bevelers
- 3T scanners
- Micromanipulation microrheology microscopes
- Polygraph recorders
- Deflectors
- Pressure transducers
- Pulse oximeters
- Magnetic resonance imaging MRI systems
- Pinch gauges
- Radiation compliance testing devices
- Centrifuges
- Spectrofluorimeters
- Pacemaker analyzers
- Digital sonomicrometers
- Motion actuators
- Biomimetic robots
- Force platforms
- Microplate readers
- Bio-sensors
- Electromyographs EMG
- Functional magnetic resonance imaging fMRI scanners
- Acoustic measurement systems
- Bacteria-based biosensors
- Impact testers
- High-speed digital cameras
- Immuno-sensors
- Ventilator performance analyzers
- Hardware description language HDL
- Stochastic modeling software
- Advanced computer simulation language ACSL
- Criticality analysis software
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- Preventive maintenance software
- Biomechanical modeling software
- Human modeling software
- SAP BusinessObjects Crystal Reports
- IBM Rational RequisitePro
- Microsoft Excel
- Mean time between failures MBTF software
- Finite element method FEM software
- Virtual instrument software
- Charting software
- Dyadem FMEA Pro-6
- Rapid application development RAD software
- The MathWorks MATLAB
- Instrument control software
- Fourier transform infrared FTIR software
- Microsoft PowerPoint
- Electromyograph analysis software
- Common cause failure assessment software
- Electronic design automation EDA software
- Equipment compliance testing software
- Numerical analysis software
- Defect tracking software
- Electromechanical testing analysis software
- Wolfram Research Mathematica
- System testing software
- Schematic design entry software
- R
- Image analysis software
- Neural network modeling software
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Force platform software
- Fault tree analysis FTA software
- Hypertext markup language HTML
- Failure rate data in perspective FARADIP software
- Calculating optimum maintenance parameters COMPARE
- National Instruments LabVIEW
- IBM Rational ClearCase
- Dassault Systems SOLIDWORKS
- Zuken
- JavaScript
- Laboratory information management system LIMS
- Rapid prototyping software
- Computational fluid dynamics CFD software
- Computer aided design CAD software
- Test automation software
- Gait analysis software
- Force sensitive applications FSA software
- Molecular simulation software
- Computer aided manufacturing CAM software
- Failure rate database software
- Unified modeling language UML
- Instrument validation software
- Embedded systems testing software
- Technis BETAPLUS
- Requirements management software
- Simulation program with integrated circuit emphasis SPICE
- Stratasys FDM MedModeler
- Microsoft Visual Basic
- Motion analysis software
- SNOINO Ttree
- Materials testing software
- Microsoft Office
- Three-dimensional motion capture software
- ERP software
- Medical information software
- Microsoft Project
- C++
- IBM Rational ClearQuest
- Minitab
- Root cause analysis software
- SNOINO RCM Pro
- Cadence Encounter Test
- Microsoft Word
- Mathsoft Mathcad
- PTC Pro/ENGINEER Wildfire
- ANSYS
- Extensible markup language XML
- Reliability centered maintenance RCM software
- Project estimation software
- Cadence Allegro Design Entry Capture and Capture CIS
- Diagramming software
- Functional modeling software
- Verilog
- Failure mode and effects analysis FMEA software
- OrCAD Capture
- Medical imaging software
- Computational modeling software
- C
- Circuit simulation software
- Mentor Graphics
- Calibration software
- Fault modeling software