Will “Biomedical Electronics Technician” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Biomedical Electronics Technician” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Biomedical Electronics Technician”
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Analyze new medical procedures to forecast likely outcomes.
- Conduct preventative maintenance on equipment.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Research new materials to be used for products, such as implanted artificial organs.
- Design and deliver technology to assist people with disabilities.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Adapt or design computer hardware or software for medical science uses.
- Keep documentation of service histories on all biomedical equipment.
- Advise and assist in the application of instrumentation in clinical environments.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
Related Technology & Tools
- High-speed digital cameras
- Spectrofluorimeters
- 3T scanners
- Posturographic measurement systems
- Grip dynamometers
- Pressure transducers
- Ultrasound imaging scanners
- Glass micromolds
- Non-invasive blood pressure monitor analyzers
- Material tension/compression testing devices
- Prosthetic limb testers
- Bioreactors
- Microplating equipment
- Ultrasonic testing apparatus
- Pacemaker analyzers
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Scanning probe microscopes SPM
- Optical tomographic imaging scanners
- Pressure sensors
- Electroplating apparatus
- Isolators
- Sublimation printers
- Biomedical device electrical safety testers
- Multi-axis kinematic knee simulators
- Electrode pullers
- Basic stamp microcontrollers
- Electrosurgery testing devices
- Eye tracking devices
- Micropumps
- Microvalves
- Pulsating bubble surfactometers PBS
- Fourier transform infrared FTIR spectrometers
- Plasma excitation chambers
- Pulse oximeters
- Anthropometers
- Gas flow control systems
- Bio-sensors
- Activity monitoring devices
- Optical traps
- Bacteria-based biosensors
- Molecular vacuum pumps
- Polymerase chain reaction PCR equipment
- Acoustic measurement systems
- Incubator performance analyzers
- Oscilloscopes
- Skinfold calipers
- Electroencephalography EEG equipment
- Radiation compliance testing devices
- Deflectors
- Maskless photolithography equipment
- Polymer matrices
- Plastic injection molding machines
- Laptop computers
- Frequency shifters
- Milling machines
- Finger joint flexure testers
- Insole sensors
- Servopneumatic actuators
- Electrode bevelers
- Patient monitoring testing devices
- Soft materials in-vitro simulation system
- Incubators
- Cone-plate viscometers
- Environmental conditions measurement devices
- Dynamometers
- Single photon emission computed tomography SPECT scanners
- Optical coherence tomography OCT scanners
- Centrifuges
- Footswitch sensors
- Electrical particle detectors
- Fluorescence microscopes
- Optical particle detectors
- X ray lithography equipment
- Radio frequency amplifiers
- Opto-electronic electrogoniometers
- Polymer scaffolds
- Medical radiation dosimeters
- Polygraph recorders
- Arbitrary waveform generators
- Endovascular stent-graft testing instruments
- Motion actuators
- Accelerometers
- Sterilization-in-place equipment
- Functional magnetic resonance imaging fMRI scanners
- Microfluidic networks
- Ventilator performance analyzers
- Hardness testing devices
- Superconducting quantum interference devices SQUID
- Piezoelectric ceramic transducers
- Electromyographs EMG
- Strain gauges
- Defibrillator testing devices
- Strain gauge conditioners
- Micromolding lithography equipment
- Multimeters
- Magnetic resonance imaging MRI systems
- Microplate readers
- Axial-torsional testing systems
- Quantum-based switching applications Q-switch electron waveguides
- Ultrasound transducers
- Flow control devices
- Servopneumatic axial test instruments
- Load sensors
- Spine simulators
- Micromanipulation microrheology microscopes
- Immuno-sensors
- Multi-photon microscopes
- Piezoelectric sensors
- Spirometers
- Force platforms
- X ray machines
- Ultrasound indention probes
- Bio-signal amplifiers
- Digital sonomicrometers
- Physical conditioning treadmill exercisers
- Grass stimulators
- Microcontrollers
- Pacemaker testing devices
- Microelectrodes
- Impact testers
- Laser ablation machines
- Molecular cytosensors
- Cardiovascular prosthetic device testers
- Intravenous IV pump analyzers
- Spinal disk implant wear testers
- Circuit analyzers
- Biomimetic robots
- Rapid toxicity testing systems
- Two-point discriminators
- Pressure and temperature measurement devices
- Torsiometers
- Bio-signal simulators
- Material fatigue and dynamics characterization devices
- Ultrasound wattmeters
- Biomagnetic imaging scanners
- Microplate washers
- Pinch gauges
- Biosafety cabinets
- Acousto-optic modulators
- Positron emission tomography PET scanners
- Desktop computers
- Dissolved oxygen polarographic measurement devices
- C++
- Technis BETAPLUS
- Hardware description language HDL
- IBM Rational RequisitePro
- The MathWorks MATLAB
- Gait analysis software
- PTC Pro/ENGINEER Wildfire
- IBM Rational ClearQuest
- Stratasys FDM MedModeler
- Microsoft Project
- National Instruments LabVIEW
- Medical imaging software
- Molecular simulation software
- ANSYS
- IBM Rational ClearCase
- SNOINO RCM Pro
- Electronic design automation EDA software
- Three-dimensional motion capture software
- Fault modeling software
- Diagramming software
- Criticality analysis software
- Test automation software
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Cadence Allegro Design Entry Capture and Capture CIS
- Stochastic modeling software
- Charting software
- Microsoft Excel
- Instrument control software
- Image analysis software
- Verilog
- Finite element method FEM software
- Common cause failure assessment software
- Microsoft Word
- Biomechanical modeling software
- Hypertext markup language HTML
- Failure mode and effects analysis FMEA software
- R
- Dassault Systems SOLIDWORKS
- Mean time between failures MBTF software
- Computational fluid dynamics CFD software
- Computational modeling software
- Preventive maintenance software
- Calculating optimum maintenance parameters COMPARE
- Schematic design entry software
- Advanced computer simulation language ACSL
- Cadence Encounter Test
- Motion analysis software
- Fault tree analysis FTA software
- Microsoft PowerPoint
- Medical information software
- SAP BusinessObjects Crystal Reports
- SNOINO Ttree
- Defect tracking software
- Embedded systems testing software
- Computer aided design CAD software
- Failure rate database software
- Wolfram Research Mathematica
- Mentor Graphics
- OrCAD Capture
- Force sensitive applications FSA software
- C
- Materials testing software
- JavaScript
- Extensible markup language XML
- Instrument validation software
- Equipment compliance testing software
- Unified modeling language UML
- Computer aided manufacturing CAM software
- Fourier transform infrared FTIR software
- ERP software
- Circuit simulation software
- Dyadem FMEA Pro-6
- Microsoft Visual Basic
- Project estimation software
- Rapid application development RAD software
- Electromyograph analysis software
- Laboratory information management system LIMS
- Virtual instrument software
- Zuken
- Neural network modeling software
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- Numerical analysis software
- Reliability centered maintenance RCM software
- Minitab
- System testing software
- Force platform software
- Rapid prototyping software
- Simulation program with integrated circuit emphasis SPICE
- Root cause analysis software
- Requirements management software
- Human modeling software
- Electromechanical testing analysis software
- Functional modeling software
- Failure rate data in perspective FARADIP software
- Calibration software
- Microsoft Office
- Mathsoft Mathcad