Will “Biomedical Technician” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Biomedical Technician” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Technician
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Biomedical Technician”
- Analyze new medical procedures to forecast likely outcomes.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Advise and assist in the application of instrumentation in clinical environments.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Design and deliver technology to assist people with disabilities.
- Conduct preventative maintenance on equipment.
- Keep documentation of service histories on all biomedical equipment.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Research new materials to be used for products, such as implanted artificial organs.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
- Adapt or design computer hardware or software for medical science uses.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
Related Technology & Tools
- Bioreactors
- Positron emission tomography PET scanners
- Torsiometers
- Radio frequency amplifiers
- Incubators
- Centrifuges
- Material tension/compression testing devices
- Spine simulators
- Deflectors
- Laptop computers
- Multi-axis kinematic knee simulators
- X ray lithography equipment
- Basic stamp microcontrollers
- Cardiovascular prosthetic device testers
- Single photon emission computed tomography SPECT scanners
- Grip dynamometers
- Polygraph recorders
- Spectrofluorimeters
- Ultrasound indention probes
- Scanning probe microscopes SPM
- Microplating equipment
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Pressure and temperature measurement devices
- Microfluidic networks
- Bacteria-based biosensors
- Functional magnetic resonance imaging fMRI scanners
- Servopneumatic axial test instruments
- Oscilloscopes
- 3T scanners
- Electroencephalography EEG equipment
- Acoustic measurement systems
- Strain gauges
- Prosthetic limb testers
- Pacemaker testing devices
- Pinch gauges
- Plastic injection molding machines
- Microplate washers
- Dissolved oxygen polarographic measurement devices
- Bio-signal simulators
- Multimeters
- X ray machines
- Load sensors
- Pulse oximeters
- Material fatigue and dynamics characterization devices
- Microelectrodes
- Milling machines
- Multi-photon microscopes
- Spirometers
- Gas flow control systems
- Biomedical device electrical safety testers
- Fourier transform infrared FTIR spectrometers
- Circuit analyzers
- Cone-plate viscometers
- Electrical particle detectors
- Strain gauge conditioners
- Microcontrollers
- Fluorescence microscopes
- Soft materials in-vitro simulation system
- Desktop computers
- Optical tomographic imaging scanners
- Servopneumatic actuators
- Maskless photolithography equipment
- Laser ablation machines
- Digital sonomicrometers
- Electrode bevelers
- Accelerometers
- Motion actuators
- Skinfold calipers
- Pressure sensors
- Polymer matrices
- Microvalves
- Polymer scaffolds
- Micromolding lithography equipment
- Rapid toxicity testing systems
- Micromanipulation microrheology microscopes
- Two-point discriminators
- Activity monitoring devices
- Ultrasonic testing apparatus
- Radiation compliance testing devices
- Grass stimulators
- Ultrasound transducers
- Physical conditioning treadmill exercisers
- Flow control devices
- Isolators
- Finger joint flexure testers
- Defibrillator testing devices
- Force platforms
- Sterilization-in-place equipment
- Bio-sensors
- Impact testers
- Piezoelectric ceramic transducers
- Frequency shifters
- Intravenous IV pump analyzers
- Insole sensors
- Electrosurgery testing devices
- Micropumps
- Superconducting quantum interference devices SQUID
- Optical particle detectors
- Acousto-optic modulators
- Environmental conditions measurement devices
- Non-invasive blood pressure monitor analyzers
- Spinal disk implant wear testers
- Opto-electronic electrogoniometers
- Quantum-based switching applications Q-switch electron waveguides
- Dynamometers
- Electroplating apparatus
- Hardness testing devices
- Magnetic resonance imaging MRI systems
- Arbitrary waveform generators
- Endovascular stent-graft testing instruments
- Pacemaker analyzers
- Biosafety cabinets
- Ultrasound imaging scanners
- Optical traps
- Footswitch sensors
- Plasma excitation chambers
- Posturographic measurement systems
- Electromyographs EMG
- Bio-signal amplifiers
- Molecular vacuum pumps
- Sublimation printers
- Immuno-sensors
- Electrode pullers
- Piezoelectric sensors
- Molecular cytosensors
- Anthropometers
- Pulsating bubble surfactometers PBS
- Optical coherence tomography OCT scanners
- Ventilator performance analyzers
- Glass micromolds
- High-speed digital cameras
- Patient monitoring testing devices
- Pressure transducers
- Polymerase chain reaction PCR equipment
- Medical radiation dosimeters
- Axial-torsional testing systems
- Biomimetic robots
- Microplate readers
- Biomagnetic imaging scanners
- Incubator performance analyzers
- Eye tracking devices
- Ultrasound wattmeters
- C
- Failure rate data in perspective FARADIP software
- Project estimation software
- Microsoft Excel
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Microsoft Word
- Three-dimensional motion capture software
- Computer aided manufacturing CAM software
- Mean time between failures MBTF software
- Requirements management software
- National Instruments LabVIEW
- IBM Rational RequisitePro
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- Stratasys FDM MedModeler
- JavaScript
- Circuit simulation software
- Functional modeling software
- Equipment compliance testing software
- C++
- Computational modeling software
- Root cause analysis software
- Computer aided design CAD software
- Simulation program with integrated circuit emphasis SPICE
- Calibration software
- ANSYS
- Wolfram Research Mathematica
- Fault modeling software
- Medical imaging software
- SNOINO RCM Pro
- Molecular simulation software
- Test automation software
- Microsoft Project
- ERP software
- Schematic design entry software
- The MathWorks MATLAB
- Zuken
- Common cause failure assessment software
- Microsoft Visual Basic
- Mathsoft Mathcad
- PTC Pro/ENGINEER Wildfire
- Instrument control software
- Minitab
- Failure mode and effects analysis FMEA software
- Fault tree analysis FTA software
- Motion analysis software
- Verilog
- Diagramming software
- Hardware description language HDL
- SAP BusinessObjects Crystal Reports
- Electromyograph analysis software
- Finite element method FEM software
- Rapid application development RAD software
- Technis BETAPLUS
- Embedded systems testing software
- Extensible markup language XML
- System testing software
- Failure rate database software
- Dyadem FMEA Pro-6
- Cadence Allegro Design Entry Capture and Capture CIS
- Medical information software
- Calculating optimum maintenance parameters COMPARE
- Defect tracking software
- Computational fluid dynamics CFD software
- R
- Stochastic modeling software
- Electromechanical testing analysis software
- Microsoft Office
- Human modeling software
- IBM Rational ClearQuest
- Dassault Systems SOLIDWORKS
- Microsoft PowerPoint
- Advanced computer simulation language ACSL
- Hypertext markup language HTML
- Electronic design automation EDA software
- Rapid prototyping software
- SNOINO Ttree
- Cadence Encounter Test
- Materials testing software
- Reliability centered maintenance RCM software
- Instrument validation software
- Force sensitive applications FSA software
- OrCAD Capture
- Force platform software
- Mentor Graphics
- Preventive maintenance software
- Neural network modeling software
- Image analysis software
- Numerical analysis software
- Criticality analysis software
- Fourier transform infrared FTIR software
- Gait analysis software
- Charting software
- Unified modeling language UML
- Laboratory information management system LIMS
- Virtual instrument software
- Biomechanical modeling software
- IBM Rational ClearCase