Will “Auto Research Engineer” be Replaced By Robots? 🤔
1.1% Chance of Automation
“Auto Research Engineer” will not be replaced by robots.
This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2141.00
- The Mean Annual Wage in the U.S. is $ 89,800.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 285,790 people on this job
☝️ Information based on the reference occupation “Mechanical Engineers”.
Also Known As…
- Mechanical Engineers
- Test Engineer
- Project Engineer
- Product Engineer
- Process Engineer
- Mechanical Engineer
- Mechanical Design Engineer
- Equipment Engineer
- Design Maintenance Engineer
- Design Engineer
- Application Engineer
- Wind Turbine Mechanical Engineer
- Weapons Engineer
- Weapons Designer
- Ventilating Expert
- Ventilating Engineer
- Utilization Engineer
- Tooling Engineer
- Tool Engineer
- Tool Designer
- Tool Design Engineer
- Tool and Die Engineer
- Textile Engineer
- Test Inspection Engineer
- Supplier Quality Engineer (SQE)
- Stress Analyst
- Sheet Metal Engineer
- Servomechanism Designer
- Roller Coaster Engineer
- Roller Coaster Designer
- Refrigeration Engineer
- Products Mechanical Design Engineer
- Plant Equipment Engineer
- Motorcycle Designer
- Mechanical Research Engineer
- Mechanical Equipment Test Engineer
- Mechanical Development Engineer
- Mechanical Design Facilities or Products Engineer
- Machine Tool Designer
- Machine Design Engineer
- Internal Combustion Engineer
- Installation Engineer
- Industrial Retrofit Designer
- Industrial Green Systems Designer
- Hydroelectric Plant Mechanical Engineer
- Hydraulic Engineer
- HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
- HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
- HVAC Engineer (Heating Ventilation Air Conditioning Engineer)
- HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)
- Heating Engineer
- Heating and Cooling Systems Engineer
- Geothermal Power Generation Mechanical Engineer
- Field Service Engineer
- Failure Analysis Technician
- Facilities Mechanical Design Engineer
- Erecting Engineer
- Engineer
- Engine Designer
- Electro-Mechanical Engineer
- Dust Control Engineer
- Distribution Engineer
- Diesel Retrofit Designer
- Diesel Engineer
- Cryogenics Engineer
- Cooling and Heating Systems Design Engineer
- Combustion Engineer
- Car Designer
- Brake Engineer
- Body Engineer
- Automation Engineer
- Air Conditioning Engineer
Tasks for “Auto Research Engineer”
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Solicit new business.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Recommend design modifications to eliminate machine or system malfunctions.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Provide technical customer service.
- Design test control apparatus or equipment or develop procedures for testing products.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Provide feedback to design engineers on customer problems or needs.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Write performance requirements for product development or engineering projects.
Related Technology & Tools
- Photoelastic testing machines
- Optical sensors
- Dynamometers
- Projection lithography equipment
- Ellipsometers
- Wire bonders
- Evaporation systems
- Contact lithography equipment
- X ray radiographic systems
- Torque transducers
- Dynamic strain indicators
- Spin-coaters
- Position transducers
- Chemical-mechanical polishing equipment
- Vibration testers
- Scanning tunneling microscopes STM
- Heat exchangers
- Nano indentation systems
- Pattern generators
- Strain gauges
- Plasma etchers
- Scanning electron microscopes SEM
- Wafer bonding systems
- Fused deposition modeling FDM machines
- Programmable logic controllers PLC
- Multi-pen plotters
- Environmental testing chambers
- Computed tomography CT systems
- Laser digitizers
- Velocity transducers
- Digital to analog converters
- Scanning probe microscopes SPM
- Laser Doppler velocimeters LDV
- Personal computers
- Deep reactive ion etchers DRIE
- Optical laser scanners
- Vibration isolators
- Accelerometers
- Vapor deposition tube furnaces
- Coordinate measuring machines CMM
- Cryogenic apparatus
- X ray tubes
- Servohydraulic material testing machines
- Subsonic wind tunnels
- Acoustic emission AE sensors
- Interferometric microscopes
- Oscilloscopes
- Precision positioning tables
- Interferometers
- Pitot tubes
- Vibration control systems
- Rapid thermal processing systems
- Radio frequency sensors
- Function generators
- Multimeters
- Flip-chip wafer bonding systems
- Spectrum analyzers
- Air compressors
- Video editing equipment
- Stylus profilometers
- Force transducers
- Laser Doppler anemometers
- Infrared thermography cameras
- Supersonic wind tunnels
- Aligners
- Analog to digital converters
- Contact testers
- Digital particle image velocimeters
- Surface profilometers
- Wire electrical discharge machines
- Sputtering systems
- Fluorescence spectrometers
- Torsional converters
- Steppers
- Anodic wafer bonding systems
- Wafer dicing saws
- Accelerated life testing software
- Reverse engineering software
- Zemax
- C
- National Instruments LabVIEW
- Failure mode and effects analysis FMEA software
- ESRI ArcGIS software
- C++
- Adobe Systems Adobe Illustrator
- COSMOSWorks
- Human machine interface HMI software
- Mesh generation software
- Microsoft Office
- Ladder Logic
- Lambda Research OSLO
- Adobe Systems Adobe ActionScript
- Computer aided manufacturing CAM software
- Microsoft Project
- Microsoft PowerPoint
- Grid generation software
- ANSYS
- MUMPS M
- Computer numerical control CNC software
- Bill of materials software
- Motion analysis software
- ReliaSoft Alta 6 Pro
- UGS I-DEAS
- Autodesk AutoCAD
- Design of experiments DOE software
- Failure assessment software
- Rapid prototyping software
- Hewlett-Packard HP Graphics Language HPGL
- Video analysis software
- Dassault Systems SOLIDWORKS
- IBM Notes
- SAP
- Microsoft Visual Basic
- Finite element method FEM software
- Cost estimation software
- Blue Ridge Numerics CFDesign
- Metrix Imageware Surfacer
- 1CadCam Unigraphics
- Bentley MicroStation
- Mathsoft Mathcad
- Intergraph Plant Design System PDS
- InnovMetric PolyWorks
- Minitab
- Verilog
- Reliability analysis software
- Microsoft Visio
- The MathWorks MATLAB
- Computer aided design and drafting software CADD
- ReliaSoft Weibull++ 6
- Sigmetrix CETOL 6 Sigma
- Modal analysis software
- Microsoft Access
- Data acquisition software
- Dassault Systemes CATIA
- Statistical software
- Microsoft Word
- Autodesk Revit
- Autodesk AutoCAD Civil 3D
- Rockwell Automation
- Microsoft Excel
- Life cycle cost software
- MAYA Nastran
- G-code
- Optical analysis software
- Statistical energy analysis SEA software
- Oracle Primavera Enterprise Project Portfolio Management
- Computational fluid dynamics CFD software
- ReliaSoft BlockSim
- PTC Creo Parametric