Will “Electro-Mechanical Engineer” be Replaced By Robots? 🤔
1.1% Chance of Automation
“Electro-Mechanical Engineer” will not be replaced by robots.
This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2141.00
- The Mean Annual Wage in the U.S. is $ 89,800.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 285,790 people on this job
☝️ Information based on the reference occupation “Mechanical Engineers”.
Also Known As…
- Mechanical Engineers
- Test Engineer
- Project Engineer
- Product Engineer
- Process Engineer
- Mechanical Engineer
- Mechanical Design Engineer
- Equipment Engineer
- Design Maintenance Engineer
- Design Engineer
- Application Engineer
- Wind Turbine Mechanical Engineer
- Weapons Engineer
- Weapons Designer
- Ventilating Expert
- Ventilating Engineer
- Utilization Engineer
- Tooling Engineer
- Tool Engineer
- Tool Designer
- Tool Design Engineer
- Tool and Die Engineer
- Textile Engineer
- Test Inspection Engineer
- Supplier Quality Engineer (SQE)
- Stress Analyst
- Sheet Metal Engineer
- Servomechanism Designer
- Roller Coaster Engineer
- Roller Coaster Designer
- Refrigeration Engineer
- Products Mechanical Design Engineer
- Plant Equipment Engineer
- Motorcycle Designer
- Mechanical Research Engineer
- Mechanical Equipment Test Engineer
- Mechanical Development Engineer
- Mechanical Design Facilities or Products Engineer
- Machine Tool Designer
- Machine Design Engineer
- Internal Combustion Engineer
- Installation Engineer
- Industrial Retrofit Designer
- Industrial Green Systems Designer
- Hydroelectric Plant Mechanical Engineer
- Hydraulic Engineer
- HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
- HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
- HVAC Engineer (Heating Ventilation Air Conditioning Engineer)
- HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)
- Heating Engineer
- Heating and Cooling Systems Engineer
- Geothermal Power Generation Mechanical Engineer
- Field Service Engineer
- Failure Analysis Technician
- Facilities Mechanical Design Engineer
- Erecting Engineer
- Engineer
- Engine Designer
- Dust Control Engineer
- Distribution Engineer
- Diesel Retrofit Designer
- Diesel Engineer
- Cryogenics Engineer
- Cooling and Heating Systems Design Engineer
- Combustion Engineer
- Car Designer
- Brake Engineer
- Body Engineer
- Automation Engineer
- Auto Research Engineer
- Air Conditioning Engineer
Tasks for “Electro-Mechanical Engineer”
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Write performance requirements for product development or engineering projects.
- Design test control apparatus or equipment or develop procedures for testing products.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Recommend design modifications to eliminate machine or system malfunctions.
- Solicit new business.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Provide feedback to design engineers on customer problems or needs.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Provide technical customer service.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
Related Technology & Tools
- Velocity transducers
- Pattern generators
- Scanning tunneling microscopes STM
- Acoustic emission AE sensors
- X ray tubes
- Dynamometers
- Personal computers
- Chemical-mechanical polishing equipment
- Dynamic strain indicators
- Steppers
- Laser Doppler velocimeters LDV
- Wire electrical discharge machines
- Digital particle image velocimeters
- Interferometers
- Torque transducers
- Surface profilometers
- Optical sensors
- Spin-coaters
- Strain gauges
- Contact lithography equipment
- Pitot tubes
- Nano indentation systems
- Stylus profilometers
- Video editing equipment
- Rapid thermal processing systems
- Vapor deposition tube furnaces
- Laser Doppler anemometers
- Cryogenic apparatus
- Servohydraulic material testing machines
- Flip-chip wafer bonding systems
- Scanning probe microscopes SPM
- Evaporation systems
- Air compressors
- Radio frequency sensors
- Position transducers
- Multi-pen plotters
- Ellipsometers
- Plasma etchers
- Deep reactive ion etchers DRIE
- Environmental testing chambers
- Computed tomography CT systems
- Subsonic wind tunnels
- Function generators
- Vibration control systems
- X ray radiographic systems
- Vibration testers
- Laser digitizers
- Infrared thermography cameras
- Sputtering systems
- Force transducers
- Vibration isolators
- Optical laser scanners
- Digital to analog converters
- Accelerometers
- Scanning electron microscopes SEM
- Anodic wafer bonding systems
- Analog to digital converters
- Programmable logic controllers PLC
- Contact testers
- Photoelastic testing machines
- Oscilloscopes
- Projection lithography equipment
- Heat exchangers
- Multimeters
- Wafer dicing saws
- Fused deposition modeling FDM machines
- Coordinate measuring machines CMM
- Interferometric microscopes
- Spectrum analyzers
- Fluorescence spectrometers
- Precision positioning tables
- Wire bonders
- Wafer bonding systems
- Supersonic wind tunnels
- Aligners
- Torsional converters
- Metrix Imageware Surfacer
- Microsoft Visual Basic
- COSMOSWorks
- Minitab
- Sigmetrix CETOL 6 Sigma
- Microsoft Office
- Ladder Logic
- Microsoft Word
- Computer numerical control CNC software
- C
- Bentley MicroStation
- Mathsoft Mathcad
- Reliability analysis software
- Microsoft PowerPoint
- Bill of materials software
- Human machine interface HMI software
- 1CadCam Unigraphics
- Computer aided manufacturing CAM software
- Lambda Research OSLO
- National Instruments LabVIEW
- Microsoft Project
- Reverse engineering software
- Video analysis software
- Statistical software
- SAP
- Data acquisition software
- Optical analysis software
- Life cycle cost software
- Modal analysis software
- Accelerated life testing software
- ReliaSoft Weibull++ 6
- Cost estimation software
- ReliaSoft Alta 6 Pro
- Grid generation software
- Dassault Systemes CATIA
- IBM Notes
- MUMPS M
- Microsoft Access
- Mesh generation software
- ReliaSoft BlockSim
- Adobe Systems Adobe Illustrator
- The MathWorks MATLAB
- Adobe Systems Adobe ActionScript
- Finite element method FEM software
- Motion analysis software
- Oracle Primavera Enterprise Project Portfolio Management
- Intergraph Plant Design System PDS
- Autodesk AutoCAD Civil 3D
- Dassault Systems SOLIDWORKS
- MAYA Nastran
- Computer aided design and drafting software CADD
- Microsoft Excel
- Rapid prototyping software
- G-code
- Failure mode and effects analysis FMEA software
- Failure assessment software
- Microsoft Visio
- C++
- Zemax
- PTC Creo Parametric
- UGS I-DEAS
- Computational fluid dynamics CFD software
- Design of experiments DOE software
- ANSYS
- Verilog
- Autodesk Revit
- Blue Ridge Numerics CFDesign
- Hewlett-Packard HP Graphics Language HPGL
- Autodesk AutoCAD
- Statistical energy analysis SEA software
- ESRI ArcGIS software
- Rockwell Automation
- InnovMetric PolyWorks