Will “Failure Analysis Technician” be Replaced By Robots? 🤔
1.1% Chance of Automation
“Failure Analysis Technician” will not be replaced by robots.
This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2141.00
- The Mean Annual Wage in the U.S. is $ 89,800.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 285,790 people on this job
☝️ Information based on the reference occupation “Mechanical Engineers”.
Also Known As…
- Mechanical Engineers
- Test Engineer
- Project Engineer
- Product Engineer
- Process Engineer
- Mechanical Engineer
- Mechanical Design Engineer
- Equipment Engineer
- Design Maintenance Engineer
- Design Engineer
- Application Engineer
- Wind Turbine Mechanical Engineer
- Weapons Engineer
- Weapons Designer
- Ventilating Expert
- Ventilating Engineer
- Utilization Engineer
- Tooling Engineer
- Tool Engineer
- Tool Designer
- Tool Design Engineer
- Tool and Die Engineer
- Textile Engineer
- Test Inspection Engineer
- Supplier Quality Engineer (SQE)
- Stress Analyst
- Sheet Metal Engineer
- Servomechanism Designer
- Roller Coaster Engineer
- Roller Coaster Designer
- Refrigeration Engineer
- Products Mechanical Design Engineer
- Plant Equipment Engineer
- Motorcycle Designer
- Mechanical Research Engineer
- Mechanical Equipment Test Engineer
- Mechanical Development Engineer
- Mechanical Design Facilities or Products Engineer
- Machine Tool Designer
- Machine Design Engineer
- Internal Combustion Engineer
- Installation Engineer
- Industrial Retrofit Designer
- Industrial Green Systems Designer
- Hydroelectric Plant Mechanical Engineer
- Hydraulic Engineer
- HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
- HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
- HVAC Engineer (Heating Ventilation Air Conditioning Engineer)
- HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)
- Heating Engineer
- Heating and Cooling Systems Engineer
- Geothermal Power Generation Mechanical Engineer
- Field Service Engineer
- Facilities Mechanical Design Engineer
- Erecting Engineer
- Engineer
- Engine Designer
- Electro-Mechanical Engineer
- Dust Control Engineer
- Distribution Engineer
- Diesel Retrofit Designer
- Diesel Engineer
- Cryogenics Engineer
- Cooling and Heating Systems Design Engineer
- Combustion Engineer
- Car Designer
- Brake Engineer
- Body Engineer
- Automation Engineer
- Auto Research Engineer
- Air Conditioning Engineer
Tasks for “Failure Analysis Technician”
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Solicit new business.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Recommend design modifications to eliminate machine or system malfunctions.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Design test control apparatus or equipment or develop procedures for testing products.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Provide technical customer service.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Write performance requirements for product development or engineering projects.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Provide feedback to design engineers on customer problems or needs.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
Related Technology & Tools
- Cryogenic apparatus
- Scanning electron microscopes SEM
- Surface profilometers
- Analog to digital converters
- Scanning tunneling microscopes STM
- Plasma etchers
- Velocity transducers
- Pitot tubes
- Optical sensors
- Personal computers
- Function generators
- Radio frequency sensors
- Rapid thermal processing systems
- Computed tomography CT systems
- Pattern generators
- Anodic wafer bonding systems
- Multimeters
- Subsonic wind tunnels
- Heat exchangers
- Interferometric microscopes
- Dynamometers
- Digital to analog converters
- Optical laser scanners
- Servohydraulic material testing machines
- Scanning probe microscopes SPM
- X ray radiographic systems
- Nano indentation systems
- Dynamic strain indicators
- Precision positioning tables
- Wire electrical discharge machines
- Multi-pen plotters
- Force transducers
- Stylus profilometers
- Contact lithography equipment
- Digital particle image velocimeters
- Strain gauges
- Spin-coaters
- Ellipsometers
- Chemical-mechanical polishing equipment
- Position transducers
- Aligners
- Acoustic emission AE sensors
- Laser Doppler velocimeters LDV
- Supersonic wind tunnels
- Flip-chip wafer bonding systems
- Projection lithography equipment
- Vibration testers
- Sputtering systems
- Accelerometers
- Air compressors
- X ray tubes
- Vapor deposition tube furnaces
- Vibration control systems
- Deep reactive ion etchers DRIE
- Fluorescence spectrometers
- Wafer bonding systems
- Infrared thermography cameras
- Wire bonders
- Laser Doppler anemometers
- Coordinate measuring machines CMM
- Vibration isolators
- Steppers
- Spectrum analyzers
- Laser digitizers
- Torque transducers
- Contact testers
- Fused deposition modeling FDM machines
- Video editing equipment
- Wafer dicing saws
- Interferometers
- Evaporation systems
- Programmable logic controllers PLC
- Environmental testing chambers
- Photoelastic testing machines
- Torsional converters
- Oscilloscopes
- Dassault Systemes CATIA
- Grid generation software
- Zemax
- Microsoft Visio
- Dassault Systems SOLIDWORKS
- UGS I-DEAS
- Bill of materials software
- Mesh generation software
- Microsoft Visual Basic
- National Instruments LabVIEW
- Motion analysis software
- Design of experiments DOE software
- Video analysis software
- Computational fluid dynamics CFD software
- MUMPS M
- IBM Notes
- Hewlett-Packard HP Graphics Language HPGL
- C
- Autodesk AutoCAD Civil 3D
- Microsoft Word
- Reliability analysis software
- Blue Ridge Numerics CFDesign
- Life cycle cost software
- Statistical software
- C++
- Human machine interface HMI software
- Minitab
- Computer aided manufacturing CAM software
- Computer aided design and drafting software CADD
- Optical analysis software
- Adobe Systems Adobe ActionScript
- Reverse engineering software
- Intergraph Plant Design System PDS
- Modal analysis software
- ANSYS
- Cost estimation software
- G-code
- SAP
- Computer numerical control CNC software
- Microsoft PowerPoint
- ReliaSoft BlockSim
- ESRI ArcGIS software
- Sigmetrix CETOL 6 Sigma
- Oracle Primavera Enterprise Project Portfolio Management
- Lambda Research OSLO
- ReliaSoft Weibull++ 6
- The MathWorks MATLAB
- Finite element method FEM software
- Rockwell Automation
- Mathsoft Mathcad
- Adobe Systems Adobe Illustrator
- Rapid prototyping software
- Microsoft Excel
- Microsoft Office
- ReliaSoft Alta 6 Pro
- Microsoft Access
- Statistical energy analysis SEA software
- Metrix Imageware Surfacer
- Failure mode and effects analysis FMEA software
- Bentley MicroStation
- Microsoft Project
- InnovMetric PolyWorks
- MAYA Nastran
- Verilog
- Autodesk Revit
- 1CadCam Unigraphics
- Data acquisition software
- Failure assessment software
- Autodesk AutoCAD
- Ladder Logic
- Accelerated life testing software
- COSMOSWorks
- PTC Creo Parametric