Will “Ventilating Expert” be Replaced By Robots? 🤔
1.1% Chance of Automation
“Ventilating Expert” will not be replaced by robots.
This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2141.00
- The Mean Annual Wage in the U.S. is $ 89,800.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 285,790 people on this job
☝️ Information based on the reference occupation “Mechanical Engineers”.
Also Known As…
- Mechanical Engineers
- Test Engineer
- Project Engineer
- Product Engineer
- Process Engineer
- Mechanical Engineer
- Mechanical Design Engineer
- Equipment Engineer
- Design Maintenance Engineer
- Design Engineer
- Application Engineer
- Wind Turbine Mechanical Engineer
- Weapons Engineer
- Weapons Designer
- Ventilating Engineer
- Utilization Engineer
- Tooling Engineer
- Tool Engineer
- Tool Designer
- Tool Design Engineer
- Tool and Die Engineer
- Textile Engineer
- Test Inspection Engineer
- Supplier Quality Engineer (SQE)
- Stress Analyst
- Sheet Metal Engineer
- Servomechanism Designer
- Roller Coaster Engineer
- Roller Coaster Designer
- Refrigeration Engineer
- Products Mechanical Design Engineer
- Plant Equipment Engineer
- Motorcycle Designer
- Mechanical Research Engineer
- Mechanical Equipment Test Engineer
- Mechanical Development Engineer
- Mechanical Design Facilities or Products Engineer
- Machine Tool Designer
- Machine Design Engineer
- Internal Combustion Engineer
- Installation Engineer
- Industrial Retrofit Designer
- Industrial Green Systems Designer
- Hydroelectric Plant Mechanical Engineer
- Hydraulic Engineer
- HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
- HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
- HVAC Engineer (Heating Ventilation Air Conditioning Engineer)
- HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)
- Heating Engineer
- Heating and Cooling Systems Engineer
- Geothermal Power Generation Mechanical Engineer
- Field Service Engineer
- Failure Analysis Technician
- Facilities Mechanical Design Engineer
- Erecting Engineer
- Engineer
- Engine Designer
- Electro-Mechanical Engineer
- Dust Control Engineer
- Distribution Engineer
- Diesel Retrofit Designer
- Diesel Engineer
- Cryogenics Engineer
- Cooling and Heating Systems Design Engineer
- Combustion Engineer
- Car Designer
- Brake Engineer
- Body Engineer
- Automation Engineer
- Auto Research Engineer
- Air Conditioning Engineer
Tasks for “Ventilating Expert”
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Write performance requirements for product development or engineering projects.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Design test control apparatus or equipment or develop procedures for testing products.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Solicit new business.
- Provide feedback to design engineers on customer problems or needs.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Recommend design modifications to eliminate machine or system malfunctions.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Provide technical customer service.
Related Technology & Tools
- Supersonic wind tunnels
- Precision positioning tables
- Computed tomography CT systems
- Velocity transducers
- Force transducers
- Coordinate measuring machines CMM
- X ray radiographic systems
- Aligners
- Wafer dicing saws
- Spin-coaters
- Torque transducers
- Rapid thermal processing systems
- Deep reactive ion etchers DRIE
- Digital particle image velocimeters
- Personal computers
- Air compressors
- Vibration isolators
- Oscilloscopes
- Strain gauges
- Wire electrical discharge machines
- Radio frequency sensors
- Scanning probe microscopes SPM
- Dynamic strain indicators
- Optical laser scanners
- Cryogenic apparatus
- Plasma etchers
- Heat exchangers
- Laser digitizers
- Scanning tunneling microscopes STM
- Chemical-mechanical polishing equipment
- Laser Doppler velocimeters LDV
- Ellipsometers
- Anodic wafer bonding systems
- Spectrum analyzers
- Vapor deposition tube furnaces
- Servohydraulic material testing machines
- Sputtering systems
- Photoelastic testing machines
- Torsional converters
- Flip-chip wafer bonding systems
- Contact testers
- Video editing equipment
- Dynamometers
- Nano indentation systems
- Pitot tubes
- Position transducers
- Subsonic wind tunnels
- Interferometers
- Wafer bonding systems
- Projection lithography equipment
- Accelerometers
- Infrared thermography cameras
- Surface profilometers
- X ray tubes
- Wire bonders
- Digital to analog converters
- Function generators
- Fused deposition modeling FDM machines
- Scanning electron microscopes SEM
- Programmable logic controllers PLC
- Multimeters
- Contact lithography equipment
- Fluorescence spectrometers
- Laser Doppler anemometers
- Acoustic emission AE sensors
- Multi-pen plotters
- Vibration testers
- Evaporation systems
- Interferometric microscopes
- Optical sensors
- Environmental testing chambers
- Vibration control systems
- Pattern generators
- Analog to digital converters
- Stylus profilometers
- Steppers
- Computational fluid dynamics CFD software
- UGS I-DEAS
- Oracle Primavera Enterprise Project Portfolio Management
- Mathsoft Mathcad
- Dassault Systems SOLIDWORKS
- The MathWorks MATLAB
- ReliaSoft Weibull++ 6
- ReliaSoft BlockSim
- SAP
- Computer aided manufacturing CAM software
- Computer aided design and drafting software CADD
- Rapid prototyping software
- Zemax
- Cost estimation software
- Verilog
- Sigmetrix CETOL 6 Sigma
- G-code
- Bill of materials software
- Autodesk Revit
- Design of experiments DOE software
- Autodesk AutoCAD Civil 3D
- Ladder Logic
- Microsoft Excel
- Lambda Research OSLO
- Minitab
- Human machine interface HMI software
- Rockwell Automation
- Optical analysis software
- Metrix Imageware Surfacer
- ReliaSoft Alta 6 Pro
- Dassault Systemes CATIA
- Reliability analysis software
- Microsoft Visual Basic
- Microsoft Word
- Microsoft Access
- Computer numerical control CNC software
- IBM Notes
- ESRI ArcGIS software
- MUMPS M
- Statistical software
- Hewlett-Packard HP Graphics Language HPGL
- Motion analysis software
- Life cycle cost software
- Intergraph Plant Design System PDS
- 1CadCam Unigraphics
- Finite element method FEM software
- Bentley MicroStation
- Modal analysis software
- Microsoft Office
- Microsoft Visio
- National Instruments LabVIEW
- Grid generation software
- Blue Ridge Numerics CFDesign
- Data acquisition software
- C
- C++
- COSMOSWorks
- Adobe Systems Adobe Illustrator
- Accelerated life testing software
- PTC Creo Parametric
- MAYA Nastran
- Microsoft PowerPoint
- Microsoft Project
- Adobe Systems Adobe ActionScript
- Statistical energy analysis SEA software
- Mesh generation software
- Failure assessment software
- ANSYS
- InnovMetric PolyWorks
- Reverse engineering software
- Autodesk AutoCAD
- Video analysis software
- Failure mode and effects analysis FMEA software