Will “Mechanical Research Engineer” be Replaced By Robots? 🤔
1.1% Chance of Automation
“Mechanical Research Engineer” will not be replaced by robots.
This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2141.00
- The Mean Annual Wage in the U.S. is $ 89,800.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 285,790 people on this job
☝️ Information based on the reference occupation “Mechanical Engineers”.
Also Known As…
- Mechanical Engineers
- Test Engineer
- Project Engineer
- Product Engineer
- Process Engineer
- Mechanical Engineer
- Mechanical Design Engineer
- Equipment Engineer
- Design Maintenance Engineer
- Design Engineer
- Application Engineer
- Wind Turbine Mechanical Engineer
- Weapons Engineer
- Weapons Designer
- Ventilating Expert
- Ventilating Engineer
- Utilization Engineer
- Tooling Engineer
- Tool Engineer
- Tool Designer
- Tool Design Engineer
- Tool and Die Engineer
- Textile Engineer
- Test Inspection Engineer
- Supplier Quality Engineer (SQE)
- Stress Analyst
- Sheet Metal Engineer
- Servomechanism Designer
- Roller Coaster Engineer
- Roller Coaster Designer
- Refrigeration Engineer
- Products Mechanical Design Engineer
- Plant Equipment Engineer
- Motorcycle Designer
- Mechanical Equipment Test Engineer
- Mechanical Development Engineer
- Mechanical Design Facilities or Products Engineer
- Machine Tool Designer
- Machine Design Engineer
- Internal Combustion Engineer
- Installation Engineer
- Industrial Retrofit Designer
- Industrial Green Systems Designer
- Hydroelectric Plant Mechanical Engineer
- Hydraulic Engineer
- HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
- HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
- HVAC Engineer (Heating Ventilation Air Conditioning Engineer)
- HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)
- Heating Engineer
- Heating and Cooling Systems Engineer
- Geothermal Power Generation Mechanical Engineer
- Field Service Engineer
- Failure Analysis Technician
- Facilities Mechanical Design Engineer
- Erecting Engineer
- Engineer
- Engine Designer
- Electro-Mechanical Engineer
- Dust Control Engineer
- Distribution Engineer
- Diesel Retrofit Designer
- Diesel Engineer
- Cryogenics Engineer
- Cooling and Heating Systems Design Engineer
- Combustion Engineer
- Car Designer
- Brake Engineer
- Body Engineer
- Automation Engineer
- Auto Research Engineer
- Air Conditioning Engineer
Tasks for “Mechanical Research Engineer”
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Solicit new business.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Write performance requirements for product development or engineering projects.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Provide technical customer service.
- Recommend design modifications to eliminate machine or system malfunctions.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Design test control apparatus or equipment or develop procedures for testing products.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Provide feedback to design engineers on customer problems or needs.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
Related Technology & Tools
- Ellipsometers
- Interferometric microscopes
- Flip-chip wafer bonding systems
- Digital particle image velocimeters
- Radio frequency sensors
- Rapid thermal processing systems
- Projection lithography equipment
- Personal computers
- Pattern generators
- Subsonic wind tunnels
- Analog to digital converters
- Photoelastic testing machines
- Spectrum analyzers
- Torsional converters
- Velocity transducers
- Programmable logic controllers PLC
- Scanning probe microscopes SPM
- Laser Doppler velocimeters LDV
- Digital to analog converters
- Scanning tunneling microscopes STM
- Wafer dicing saws
- Function generators
- Contact testers
- Vibration control systems
- Nano indentation systems
- Environmental testing chambers
- Vibration isolators
- Coordinate measuring machines CMM
- Wire bonders
- Steppers
- Sputtering systems
- Position transducers
- Air compressors
- Wire electrical discharge machines
- Dynamometers
- Dynamic strain indicators
- Infrared thermography cameras
- X ray radiographic systems
- Multi-pen plotters
- Cryogenic apparatus
- Heat exchangers
- Chemical-mechanical polishing equipment
- Strain gauges
- Force transducers
- Video editing equipment
- Aligners
- Spin-coaters
- Computed tomography CT systems
- Optical sensors
- Torque transducers
- Optical laser scanners
- Interferometers
- Scanning electron microscopes SEM
- Surface profilometers
- Oscilloscopes
- Evaporation systems
- Multimeters
- Contact lithography equipment
- Precision positioning tables
- X ray tubes
- Vapor deposition tube furnaces
- Accelerometers
- Wafer bonding systems
- Deep reactive ion etchers DRIE
- Laser Doppler anemometers
- Acoustic emission AE sensors
- Fused deposition modeling FDM machines
- Laser digitizers
- Vibration testers
- Anodic wafer bonding systems
- Stylus profilometers
- Servohydraulic material testing machines
- Fluorescence spectrometers
- Plasma etchers
- Pitot tubes
- Supersonic wind tunnels
- Microsoft PowerPoint
- COSMOSWorks
- Mesh generation software
- 1CadCam Unigraphics
- ReliaSoft BlockSim
- Adobe Systems Adobe ActionScript
- PTC Creo Parametric
- Microsoft Visio
- Rapid prototyping software
- Cost estimation software
- Blue Ridge Numerics CFDesign
- Sigmetrix CETOL 6 Sigma
- Dassault Systemes CATIA
- Dassault Systems SOLIDWORKS
- Computational fluid dynamics CFD software
- Rockwell Automation
- Mathsoft Mathcad
- Microsoft Word
- Statistical energy analysis SEA software
- Computer aided manufacturing CAM software
- Modal analysis software
- Minitab
- ReliaSoft Weibull++ 6
- Autodesk AutoCAD
- Microsoft Excel
- Bill of materials software
- Life cycle cost software
- Failure mode and effects analysis FMEA software
- Failure assessment software
- Hewlett-Packard HP Graphics Language HPGL
- Computer numerical control CNC software
- The MathWorks MATLAB
- Design of experiments DOE software
- Oracle Primavera Enterprise Project Portfolio Management
- Ladder Logic
- ReliaSoft Alta 6 Pro
- Reliability analysis software
- MUMPS M
- Verilog
- Microsoft Access
- Reverse engineering software
- SAP
- InnovMetric PolyWorks
- Autodesk AutoCAD Civil 3D
- Microsoft Visual Basic
- Finite element method FEM software
- National Instruments LabVIEW
- Zemax
- UGS I-DEAS
- Microsoft Office
- Computer aided design and drafting software CADD
- Grid generation software
- ESRI ArcGIS software
- MAYA Nastran
- Human machine interface HMI software
- C++
- Metrix Imageware Surfacer
- Statistical software
- ANSYS
- Microsoft Project
- Autodesk Revit
- Video analysis software
- IBM Notes
- Optical analysis software
- G-code
- Accelerated life testing software
- Adobe Systems Adobe Illustrator
- Intergraph Plant Design System PDS
- Lambda Research OSLO
- Motion analysis software
- C
- Data acquisition software
- Bentley MicroStation