Will “HVAC Engineer (Heating Ventilation Air Conditioning Engineer)” be Replaced By Robots? 🤔

1.1% Chance of Automation

“HVAC Engineer (Heating Ventilation Air Conditioning Engineer)” will not be replaced by robots.

This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.

Job Details

The SOC (Standard Occupational Classification) code is 17-2141.00
The Mean Annual Wage in the U.S. is $ 89,800.00
The Mean Hourly Wage is $ 43.00
Currently, there are 285,790 people on this job

☝️ Information based on the reference occupation “Mechanical Engineers”.

Also Known As…

Tasks for “HVAC Engineer (Heating Ventilation Air Conditioning Engineer)”

Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
Provide technical customer service.
Recommend the use of utility or energy services that minimize carbon footprints.
Evaluate mechanical designs or prototypes for energy performance or environmental impact.
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
Design test control apparatus or equipment or develop procedures for testing products.
Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
Provide feedback to design engineers on customer problems or needs.
Estimate costs or submit bids for engineering, construction, or extraction projects.
Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
Write performance requirements for product development or engineering projects.
Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
Recommend design modifications to eliminate machine or system malfunctions.
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
Solicit new business.

Related Technology & Tools

Interferometric microscopes
Acoustic emission AE sensors
X ray tubes
Torsional converters
Pitot tubes
Photoelastic testing machines
Flip-chip wafer bonding systems
Digital to analog converters
Pattern generators
Optical laser scanners
Servohydraulic material testing machines
Analog to digital converters
Air compressors
Deep reactive ion etchers DRIE
Spin-coaters
Computed tomography CT systems
Rapid thermal processing systems
Contact lithography equipment
Projection lithography equipment
Radio frequency sensors
Strain gauges
Scanning electron microscopes SEM
Wire electrical discharge machines
Vibration isolators
Scanning probe microscopes SPM
Sputtering systems
Fluorescence spectrometers
Function generators
Infrared thermography cameras
Wafer dicing saws
Aligners
Vibration testers
Heat exchangers
Vibration control systems
Laser Doppler anemometers
Wafer bonding systems
Supersonic wind tunnels
Programmable logic controllers PLC
Anodic wafer bonding systems
Ellipsometers
Position transducers
Stylus profilometers
Accelerometers
Torque transducers
Vapor deposition tube furnaces
Coordinate measuring machines CMM
Personal computers
Velocity transducers
X ray radiographic systems
Chemical-mechanical polishing equipment
Nano indentation systems
Subsonic wind tunnels
Contact testers
Surface profilometers
Oscilloscopes
Evaporation systems
Laser digitizers
Fused deposition modeling FDM machines
Force transducers
Steppers
Environmental testing chambers
Plasma etchers
Scanning tunneling microscopes STM
Spectrum analyzers
Optical sensors
Video editing equipment
Multimeters
Dynamometers
Wire bonders
Multi-pen plotters
Digital particle image velocimeters
Precision positioning tables
Dynamic strain indicators
Cryogenic apparatus
Interferometers
Laser Doppler velocimeters LDV

Computational fluid dynamics CFD software
Computer aided design and drafting software CADD
Reliability analysis software
Verilog
Lambda Research OSLO
Microsoft PowerPoint
Mathsoft Mathcad
G-code
ESRI ArcGIS software
Life cycle cost software
National Instruments LabVIEW
Sigmetrix CETOL 6 Sigma
Autodesk AutoCAD
Dassault Systems SOLIDWORKS
Bill of materials software
Microsoft Visual Basic
PTC Creo Parametric
Autodesk AutoCAD Civil 3D
Accelerated life testing software
1CadCam Unigraphics
Failure assessment software
Cost estimation software
Zemax
Failure mode and effects analysis FMEA software
Microsoft Excel
Reverse engineering software
Rapid prototyping software
C++
MAYA Nastran
Hewlett-Packard HP Graphics Language HPGL
ReliaSoft Alta 6 Pro
Optical analysis software
Ladder Logic
Statistical software
Bentley MicroStation
Mesh generation software
Computer numerical control CNC software
Modal analysis software
Human machine interface HMI software
Statistical energy analysis SEA software
Metrix Imageware Surfacer
Microsoft Access
Motion analysis software
UGS I-DEAS
ANSYS
ReliaSoft BlockSim
Minitab
Microsoft Project
Design of experiments DOE software
Computer aided manufacturing CAM software
Adobe Systems Adobe ActionScript
InnovMetric PolyWorks
COSMOSWorks
Adobe Systems Adobe Illustrator
Grid generation software
IBM Notes
Microsoft Visio
Rockwell Automation
ReliaSoft Weibull++ 6
Data acquisition software
Finite element method FEM software
The MathWorks MATLAB
C
Video analysis software
MUMPS M
Oracle Primavera Enterprise Project Portfolio Management
Autodesk Revit
Blue Ridge Numerics CFDesign
SAP
Intergraph Plant Design System PDS
Microsoft Office
Dassault Systemes CATIA
Microsoft Word