Will “Tool Designer” be Replaced By Robots? 🤔
1.1% Chance of Automation
“Tool Designer” will not be replaced by robots.
This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2141.00
- The Mean Annual Wage in the U.S. is $ 89,800.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 285,790 people on this job
☝️ Information based on the reference occupation “Mechanical Engineers”.
Also Known As…
- Mechanical Engineers
- Test Engineer
- Project Engineer
- Product Engineer
- Process Engineer
- Mechanical Engineer
- Mechanical Design Engineer
- Equipment Engineer
- Design Maintenance Engineer
- Design Engineer
- Application Engineer
- Wind Turbine Mechanical Engineer
- Weapons Engineer
- Weapons Designer
- Ventilating Expert
- Ventilating Engineer
- Utilization Engineer
- Tooling Engineer
- Tool Engineer
- Tool Design Engineer
- Tool and Die Engineer
- Textile Engineer
- Test Inspection Engineer
- Supplier Quality Engineer (SQE)
- Stress Analyst
- Sheet Metal Engineer
- Servomechanism Designer
- Roller Coaster Engineer
- Roller Coaster Designer
- Refrigeration Engineer
- Products Mechanical Design Engineer
- Plant Equipment Engineer
- Motorcycle Designer
- Mechanical Research Engineer
- Mechanical Equipment Test Engineer
- Mechanical Development Engineer
- Mechanical Design Facilities or Products Engineer
- Machine Tool Designer
- Machine Design Engineer
- Internal Combustion Engineer
- Installation Engineer
- Industrial Retrofit Designer
- Industrial Green Systems Designer
- Hydroelectric Plant Mechanical Engineer
- Hydraulic Engineer
- HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
- HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
- HVAC Engineer (Heating Ventilation Air Conditioning Engineer)
- HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)
- Heating Engineer
- Heating and Cooling Systems Engineer
- Geothermal Power Generation Mechanical Engineer
- Field Service Engineer
- Failure Analysis Technician
- Facilities Mechanical Design Engineer
- Erecting Engineer
- Engineer
- Engine Designer
- Electro-Mechanical Engineer
- Dust Control Engineer
- Distribution Engineer
- Diesel Retrofit Designer
- Diesel Engineer
- Cryogenics Engineer
- Cooling and Heating Systems Design Engineer
- Combustion Engineer
- Car Designer
- Brake Engineer
- Body Engineer
- Automation Engineer
- Auto Research Engineer
- Air Conditioning Engineer
Tasks for “Tool Designer”
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Recommend design modifications to eliminate machine or system malfunctions.
- Provide technical customer service.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Solicit new business.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Design test control apparatus or equipment or develop procedures for testing products.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Provide feedback to design engineers on customer problems or needs.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Write performance requirements for product development or engineering projects.
Related Technology & Tools
- Analog to digital converters
- Infrared thermography cameras
- Flip-chip wafer bonding systems
- Dynamic strain indicators
- Fused deposition modeling FDM machines
- Aligners
- Personal computers
- Interferometric microscopes
- X ray tubes
- Interferometers
- Multi-pen plotters
- Scanning tunneling microscopes STM
- Torque transducers
- Stylus profilometers
- Dynamometers
- Pattern generators
- Fluorescence spectrometers
- Laser Doppler velocimeters LDV
- Steppers
- Sputtering systems
- Environmental testing chambers
- Spin-coaters
- Computed tomography CT systems
- Function generators
- Surface profilometers
- Scanning electron microscopes SEM
- Position transducers
- Rapid thermal processing systems
- Subsonic wind tunnels
- Heat exchangers
- Contact testers
- Cryogenic apparatus
- Pitot tubes
- Force transducers
- Multimeters
- Contact lithography equipment
- Laser Doppler anemometers
- Oscilloscopes
- Video editing equipment
- Photoelastic testing machines
- Plasma etchers
- Spectrum analyzers
- Ellipsometers
- Nano indentation systems
- Optical sensors
- Torsional converters
- Laser digitizers
- Wire electrical discharge machines
- Digital to analog converters
- Vibration isolators
- Supersonic wind tunnels
- Wafer bonding systems
- Velocity transducers
- Coordinate measuring machines CMM
- Vapor deposition tube furnaces
- Programmable logic controllers PLC
- Acoustic emission AE sensors
- Vibration testers
- Scanning probe microscopes SPM
- Projection lithography equipment
- Wafer dicing saws
- Precision positioning tables
- Optical laser scanners
- Strain gauges
- Evaporation systems
- Air compressors
- Chemical-mechanical polishing equipment
- X ray radiographic systems
- Anodic wafer bonding systems
- Digital particle image velocimeters
- Vibration control systems
- Radio frequency sensors
- Deep reactive ion etchers DRIE
- Wire bonders
- Accelerometers
- Servohydraulic material testing machines
- Microsoft Word
- Human machine interface HMI software
- The MathWorks MATLAB
- Modal analysis software
- Verilog
- Autodesk Revit
- Computational fluid dynamics CFD software
- Motion analysis software
- Minitab
- Ladder Logic
- Adobe Systems Adobe Illustrator
- ReliaSoft BlockSim
- Rapid prototyping software
- Failure mode and effects analysis FMEA software
- Adobe Systems Adobe ActionScript
- 1CadCam Unigraphics
- Microsoft Excel
- Mesh generation software
- Design of experiments DOE software
- Reverse engineering software
- Cost estimation software
- Autodesk AutoCAD
- IBM Notes
- Lambda Research OSLO
- MUMPS M
- MAYA Nastran
- PTC Creo Parametric
- Microsoft Project
- SAP
- Grid generation software
- ReliaSoft Weibull++ 6
- Statistical energy analysis SEA software
- G-code
- Bill of materials software
- Autodesk AutoCAD Civil 3D
- Finite element method FEM software
- Blue Ridge Numerics CFDesign
- Data acquisition software
- Microsoft PowerPoint
- Failure assessment software
- Microsoft Visio
- Computer aided design and drafting software CADD
- Hewlett-Packard HP Graphics Language HPGL
- Zemax
- ReliaSoft Alta 6 Pro
- Mathsoft Mathcad
- Rockwell Automation
- Reliability analysis software
- Computer numerical control CNC software
- UGS I-DEAS
- Dassault Systemes CATIA
- Microsoft Access
- Microsoft Office
- ANSYS
- Video analysis software
- Metrix Imageware Surfacer
- C++
- Bentley MicroStation
- Computer aided manufacturing CAM software
- Statistical software
- Life cycle cost software
- C
- Oracle Primavera Enterprise Project Portfolio Management
- InnovMetric PolyWorks
- Optical analysis software
- National Instruments LabVIEW
- COSMOSWorks
- Sigmetrix CETOL 6 Sigma
- Microsoft Visual Basic
- Accelerated life testing software
- Dassault Systems SOLIDWORKS
- ESRI ArcGIS software
- Intergraph Plant Design System PDS