Will “Weapons Designer” be Replaced By Robots? 🤔
1.1% Chance of Automation
“Weapons Designer” will not be replaced by robots.
This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2141.00
- The Mean Annual Wage in the U.S. is $ 89,800.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 285,790 people on this job
☝️ Information based on the reference occupation “Mechanical Engineers”.
Also Known As…
- Mechanical Engineers
- Test Engineer
- Project Engineer
- Product Engineer
- Process Engineer
- Mechanical Engineer
- Mechanical Design Engineer
- Equipment Engineer
- Design Maintenance Engineer
- Design Engineer
- Application Engineer
- Wind Turbine Mechanical Engineer
- Weapons Engineer
- Ventilating Expert
- Ventilating Engineer
- Utilization Engineer
- Tooling Engineer
- Tool Engineer
- Tool Designer
- Tool Design Engineer
- Tool and Die Engineer
- Textile Engineer
- Test Inspection Engineer
- Supplier Quality Engineer (SQE)
- Stress Analyst
- Sheet Metal Engineer
- Servomechanism Designer
- Roller Coaster Engineer
- Roller Coaster Designer
- Refrigeration Engineer
- Products Mechanical Design Engineer
- Plant Equipment Engineer
- Motorcycle Designer
- Mechanical Research Engineer
- Mechanical Equipment Test Engineer
- Mechanical Development Engineer
- Mechanical Design Facilities or Products Engineer
- Machine Tool Designer
- Machine Design Engineer
- Internal Combustion Engineer
- Installation Engineer
- Industrial Retrofit Designer
- Industrial Green Systems Designer
- Hydroelectric Plant Mechanical Engineer
- Hydraulic Engineer
- HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
- HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
- HVAC Engineer (Heating Ventilation Air Conditioning Engineer)
- HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)
- Heating Engineer
- Heating and Cooling Systems Engineer
- Geothermal Power Generation Mechanical Engineer
- Field Service Engineer
- Failure Analysis Technician
- Facilities Mechanical Design Engineer
- Erecting Engineer
- Engineer
- Engine Designer
- Electro-Mechanical Engineer
- Dust Control Engineer
- Distribution Engineer
- Diesel Retrofit Designer
- Diesel Engineer
- Cryogenics Engineer
- Cooling and Heating Systems Design Engineer
- Combustion Engineer
- Car Designer
- Brake Engineer
- Body Engineer
- Automation Engineer
- Auto Research Engineer
- Air Conditioning Engineer
Tasks for “Weapons Designer”
- Provide feedback to design engineers on customer problems or needs.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Solicit new business.
- Provide technical customer service.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Write performance requirements for product development or engineering projects.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Design test control apparatus or equipment or develop procedures for testing products.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Recommend design modifications to eliminate machine or system malfunctions.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
Related Technology & Tools
- Velocity transducers
- Laser Doppler velocimeters LDV
- Personal computers
- Anodic wafer bonding systems
- Oscilloscopes
- Subsonic wind tunnels
- Wafer dicing saws
- Evaporation systems
- Supersonic wind tunnels
- Flip-chip wafer bonding systems
- Digital to analog converters
- Optical laser scanners
- Dynamic strain indicators
- Projection lithography equipment
- Pitot tubes
- Vibration testers
- Spectrum analyzers
- Sputtering systems
- Vibration isolators
- Wire bonders
- Vibration control systems
- Acoustic emission AE sensors
- Analog to digital converters
- Stylus profilometers
- Nano indentation systems
- Radio frequency sensors
- Torsional converters
- Fused deposition modeling FDM machines
- Air compressors
- Plasma etchers
- Accelerometers
- Precision positioning tables
- Vapor deposition tube furnaces
- Contact lithography equipment
- Contact testers
- Force transducers
- Pattern generators
- Digital particle image velocimeters
- Chemical-mechanical polishing equipment
- Fluorescence spectrometers
- Cryogenic apparatus
- Spin-coaters
- Scanning tunneling microscopes STM
- Dynamometers
- Rapid thermal processing systems
- Multi-pen plotters
- Surface profilometers
- Scanning electron microscopes SEM
- Wire electrical discharge machines
- Scanning probe microscopes SPM
- Servohydraulic material testing machines
- Video editing equipment
- Function generators
- Coordinate measuring machines CMM
- Position transducers
- Ellipsometers
- Multimeters
- Torque transducers
- Strain gauges
- Laser Doppler anemometers
- Heat exchangers
- Optical sensors
- Computed tomography CT systems
- X ray radiographic systems
- Environmental testing chambers
- Photoelastic testing machines
- Aligners
- Programmable logic controllers PLC
- Interferometric microscopes
- X ray tubes
- Deep reactive ion etchers DRIE
- Laser digitizers
- Wafer bonding systems
- Steppers
- Interferometers
- Infrared thermography cameras
- Computational fluid dynamics CFD software
- Ladder Logic
- ReliaSoft Alta 6 Pro
- Failure assessment software
- UGS I-DEAS
- Reliability analysis software
- Microsoft Visual Basic
- Statistical energy analysis SEA software
- Mathsoft Mathcad
- Data acquisition software
- Microsoft Visio
- Microsoft Word
- C
- Metrix Imageware Surfacer
- InnovMetric PolyWorks
- Design of experiments DOE software
- IBM Notes
- COSMOSWorks
- Dassault Systemes CATIA
- ReliaSoft BlockSim
- The MathWorks MATLAB
- Lambda Research OSLO
- PTC Creo Parametric
- G-code
- Microsoft PowerPoint
- Verilog
- Bill of materials software
- Life cycle cost software
- Video analysis software
- Rapid prototyping software
- Microsoft Access
- Dassault Systems SOLIDWORKS
- Motion analysis software
- Accelerated life testing software
- Human machine interface HMI software
- MUMPS M
- Computer aided design and drafting software CADD
- Reverse engineering software
- C++
- Optical analysis software
- Mesh generation software
- Microsoft Project
- Autodesk Revit
- Autodesk AutoCAD Civil 3D
- Adobe Systems Adobe Illustrator
- Computer numerical control CNC software
- Microsoft Excel
- ReliaSoft Weibull++ 6
- 1CadCam Unigraphics
- Blue Ridge Numerics CFDesign
- Autodesk AutoCAD
- Bentley MicroStation
- Sigmetrix CETOL 6 Sigma
- Grid generation software
- Failure mode and effects analysis FMEA software
- Modal analysis software
- Oracle Primavera Enterprise Project Portfolio Management
- Microsoft Office
- ANSYS
- Adobe Systems Adobe ActionScript
- Intergraph Plant Design System PDS
- Cost estimation software
- Hewlett-Packard HP Graphics Language HPGL
- Rockwell Automation
- MAYA Nastran
- National Instruments LabVIEW
- Zemax
- Minitab
- Statistical software
- SAP
- ESRI ArcGIS software
- Computer aided manufacturing CAM software
- Finite element method FEM software