Will “Motorcycle Designer” be Replaced By Robots? 🤔

1.1% Chance of Automation

“Motorcycle Designer” will not be replaced by robots.

This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.

Job Details

The SOC (Standard Occupational Classification) code is 17-2141.00
The Mean Annual Wage in the U.S. is $ 89,800.00
The Mean Hourly Wage is $ 43.00
Currently, there are 285,790 people on this job

☝️ Information based on the reference occupation “Mechanical Engineers”.

Also Known As…

Tasks for “Motorcycle Designer”

Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
Provide feedback to design engineers on customer problems or needs.
Provide technical customer service.
Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
Write performance requirements for product development or engineering projects.
Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
Recommend the use of utility or energy services that minimize carbon footprints.
Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
Solicit new business.
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
Recommend design modifications to eliminate machine or system malfunctions.
Evaluate mechanical designs or prototypes for energy performance or environmental impact.
Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
Design test control apparatus or equipment or develop procedures for testing products.
Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
Estimate costs or submit bids for engineering, construction, or extraction projects.

Related Technology & Tools

Digital particle image velocimeters
Dynamic strain indicators
Multimeters
Velocity transducers
Surface profilometers
Laser Doppler anemometers
Anodic wafer bonding systems
X ray tubes
Interferometers
Computed tomography CT systems
Pitot tubes
Contact testers
Projection lithography equipment
Environmental testing chambers
Scanning probe microscopes SPM
Optical laser scanners
Torque transducers
Spin-coaters
Wire bonders
Vapor deposition tube furnaces
Wafer dicing saws
Optical sensors
Multi-pen plotters
Fused deposition modeling FDM machines
Radio frequency sensors
Precision positioning tables
Sputtering systems
Flip-chip wafer bonding systems
Rapid thermal processing systems
Torsional converters
Acoustic emission AE sensors
Infrared thermography cameras
Laser Doppler velocimeters LDV
Vibration control systems
Dynamometers
Chemical-mechanical polishing equipment
Digital to analog converters
Wire electrical discharge machines
Ellipsometers
Strain gauges
Position transducers
Coordinate measuring machines CMM
Function generators
Vibration isolators
Servohydraulic material testing machines
Oscilloscopes
Accelerometers
Vibration testers
Analog to digital converters
Plasma etchers
X ray radiographic systems
Pattern generators
Subsonic wind tunnels
Evaporation systems
Personal computers
Nano indentation systems
Scanning electron microscopes SEM
Video editing equipment
Heat exchangers
Steppers
Force transducers
Cryogenic apparatus
Stylus profilometers
Air compressors
Supersonic wind tunnels
Programmable logic controllers PLC
Spectrum analyzers
Deep reactive ion etchers DRIE
Scanning tunneling microscopes STM
Photoelastic testing machines
Aligners
Fluorescence spectrometers
Contact lithography equipment
Laser digitizers
Interferometric microscopes
Wafer bonding systems

Intergraph Plant Design System PDS
Life cycle cost software
Reverse engineering software
IBM Notes
Verilog
Autodesk AutoCAD
Autodesk AutoCAD Civil 3D
G-code
SAP
National Instruments LabVIEW
InnovMetric PolyWorks
Motion analysis software
Lambda Research OSLO
Autodesk Revit
Blue Ridge Numerics CFDesign
Statistical software
Mesh generation software
Human machine interface HMI software
PTC Creo Parametric
1CadCam Unigraphics
Reliability analysis software
Failure assessment software
C
Statistical energy analysis SEA software
MUMPS M
Grid generation software
Dassault Systems SOLIDWORKS
Zemax
MAYA Nastran
Microsoft Excel
Rockwell Automation
COSMOSWorks
Computational fluid dynamics CFD software
C++
Microsoft Access
Rapid prototyping software
ReliaSoft Weibull++ 6
The MathWorks MATLAB
Computer aided manufacturing CAM software
UGS I-DEAS
Microsoft Visual Basic
Microsoft Office
Failure mode and effects analysis FMEA software
Microsoft PowerPoint
Modal analysis software
Design of experiments DOE software
Oracle Primavera Enterprise Project Portfolio Management
ReliaSoft BlockSim
Dassault Systemes CATIA
ESRI ArcGIS software
Ladder Logic
Mathsoft Mathcad
Hewlett-Packard HP Graphics Language HPGL
Finite element method FEM software
ANSYS
Metrix Imageware Surfacer
Microsoft Word
Optical analysis software
ReliaSoft Alta 6 Pro
Computer numerical control CNC software
Bentley MicroStation
Sigmetrix CETOL 6 Sigma
Bill of materials software
Adobe Systems Adobe Illustrator
Microsoft Project
Accelerated life testing software
Cost estimation software
Computer aided design and drafting software CADD
Video analysis software
Minitab
Microsoft Visio
Adobe Systems Adobe ActionScript
Data acquisition software