Will “Refrigeration Engineer” be Replaced By Robots? 🤔
1.1% Chance of Automation
“Refrigeration Engineer” will not be replaced by robots.
This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2141.00
- The Mean Annual Wage in the U.S. is $ 89,800.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 285,790 people on this job
☝️ Information based on the reference occupation “Mechanical Engineers”.
Also Known As…
- Mechanical Engineers
- Test Engineer
- Project Engineer
- Product Engineer
- Process Engineer
- Mechanical Engineer
- Mechanical Design Engineer
- Equipment Engineer
- Design Maintenance Engineer
- Design Engineer
- Application Engineer
- Wind Turbine Mechanical Engineer
- Weapons Engineer
- Weapons Designer
- Ventilating Expert
- Ventilating Engineer
- Utilization Engineer
- Tooling Engineer
- Tool Engineer
- Tool Designer
- Tool Design Engineer
- Tool and Die Engineer
- Textile Engineer
- Test Inspection Engineer
- Supplier Quality Engineer (SQE)
- Stress Analyst
- Sheet Metal Engineer
- Servomechanism Designer
- Roller Coaster Engineer
- Roller Coaster Designer
- Products Mechanical Design Engineer
- Plant Equipment Engineer
- Motorcycle Designer
- Mechanical Research Engineer
- Mechanical Equipment Test Engineer
- Mechanical Development Engineer
- Mechanical Design Facilities or Products Engineer
- Machine Tool Designer
- Machine Design Engineer
- Internal Combustion Engineer
- Installation Engineer
- Industrial Retrofit Designer
- Industrial Green Systems Designer
- Hydroelectric Plant Mechanical Engineer
- Hydraulic Engineer
- HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
- HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
- HVAC Engineer (Heating Ventilation Air Conditioning Engineer)
- HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)
- Heating Engineer
- Heating and Cooling Systems Engineer
- Geothermal Power Generation Mechanical Engineer
- Field Service Engineer
- Failure Analysis Technician
- Facilities Mechanical Design Engineer
- Erecting Engineer
- Engineer
- Engine Designer
- Electro-Mechanical Engineer
- Dust Control Engineer
- Distribution Engineer
- Diesel Retrofit Designer
- Diesel Engineer
- Cryogenics Engineer
- Cooling and Heating Systems Design Engineer
- Combustion Engineer
- Car Designer
- Brake Engineer
- Body Engineer
- Automation Engineer
- Auto Research Engineer
- Air Conditioning Engineer
Tasks for “Refrigeration Engineer”
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Provide technical customer service.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Provide feedback to design engineers on customer problems or needs.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Recommend design modifications to eliminate machine or system malfunctions.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Write performance requirements for product development or engineering projects.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Design test control apparatus or equipment or develop procedures for testing products.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Solicit new business.
Related Technology & Tools
- Acoustic emission AE sensors
- Aligners
- Wire bonders
- Deep reactive ion etchers DRIE
- Nano indentation systems
- Video editing equipment
- Velocity transducers
- Digital to analog converters
- Contact testers
- Interferometric microscopes
- Analog to digital converters
- Wire electrical discharge machines
- Servohydraulic material testing machines
- Coordinate measuring machines CMM
- Plasma etchers
- Dynamic strain indicators
- Scanning electron microscopes SEM
- Heat exchangers
- X ray radiographic systems
- Multimeters
- Vibration control systems
- Pattern generators
- Force transducers
- Scanning probe microscopes SPM
- Subsonic wind tunnels
- Surface profilometers
- Pitot tubes
- Radio frequency sensors
- Evaporation systems
- Position transducers
- Laser Doppler velocimeters LDV
- Torque transducers
- Multi-pen plotters
- Computed tomography CT systems
- Accelerometers
- Vibration testers
- Photoelastic testing machines
- Projection lithography equipment
- Cryogenic apparatus
- Ellipsometers
- Optical sensors
- Strain gauges
- Vapor deposition tube furnaces
- Programmable logic controllers PLC
- Supersonic wind tunnels
- Anodic wafer bonding systems
- Contact lithography equipment
- Flip-chip wafer bonding systems
- Laser Doppler anemometers
- Torsional converters
- Scanning tunneling microscopes STM
- Interferometers
- Wafer bonding systems
- Laser digitizers
- Sputtering systems
- Chemical-mechanical polishing equipment
- Vibration isolators
- Oscilloscopes
- Environmental testing chambers
- Function generators
- Optical laser scanners
- Fluorescence spectrometers
- Spin-coaters
- Fused deposition modeling FDM machines
- X ray tubes
- Dynamometers
- Steppers
- Rapid thermal processing systems
- Stylus profilometers
- Precision positioning tables
- Infrared thermography cameras
- Spectrum analyzers
- Personal computers
- Air compressors
- Wafer dicing saws
- Digital particle image velocimeters
- Motion analysis software
- C
- PTC Creo Parametric
- Oracle Primavera Enterprise Project Portfolio Management
- Video analysis software
- Microsoft Word
- Microsoft Access
- Failure mode and effects analysis FMEA software
- Microsoft Visio
- Reliability analysis software
- ESRI ArcGIS software
- Bentley MicroStation
- COSMOSWorks
- Autodesk Revit
- Microsoft PowerPoint
- Microsoft Office
- Mesh generation software
- SAP
- Rapid prototyping software
- G-code
- Optical analysis software
- C++
- Grid generation software
- Ladder Logic
- 1CadCam Unigraphics
- Bill of materials software
- Autodesk AutoCAD
- ANSYS
- Verilog
- IBM Notes
- Life cycle cost software
- Accelerated life testing software
- Modal analysis software
- Computer aided design and drafting software CADD
- Microsoft Excel
- Mathsoft Mathcad
- Design of experiments DOE software
- Reverse engineering software
- ReliaSoft BlockSim
- Computer aided manufacturing CAM software
- Cost estimation software
- ReliaSoft Weibull++ 6
- UGS I-DEAS
- Computer numerical control CNC software
- Hewlett-Packard HP Graphics Language HPGL
- Minitab
- Adobe Systems Adobe ActionScript
- Data acquisition software
- Statistical software
- The MathWorks MATLAB
- Finite element method FEM software
- Intergraph Plant Design System PDS
- Human machine interface HMI software
- MUMPS M
- Adobe Systems Adobe Illustrator
- Failure assessment software
- ReliaSoft Alta 6 Pro
- Sigmetrix CETOL 6 Sigma
- Blue Ridge Numerics CFDesign
- Lambda Research OSLO
- Statistical energy analysis SEA software
- National Instruments LabVIEW
- InnovMetric PolyWorks
- Microsoft Visual Basic
- Metrix Imageware Surfacer
- Zemax
- Computational fluid dynamics CFD software
- Microsoft Project
- Dassault Systemes CATIA
- Autodesk AutoCAD Civil 3D
- Rockwell Automation
- MAYA Nastran
- Dassault Systems SOLIDWORKS