Will “HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)” be Replaced By Robots? 🤔

1.1% Chance of Automation

“HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)” will not be replaced by robots.

This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.

Job Details

The SOC (Standard Occupational Classification) code is 17-2141.00
The Mean Annual Wage in the U.S. is $ 89,800.00
The Mean Hourly Wage is $ 43.00
Currently, there are 285,790 people on this job

☝️ Information based on the reference occupation “Mechanical Engineers”.

Also Known As…

Tasks for “HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)”

Provide technical customer service.
Design test control apparatus or equipment or develop procedures for testing products.
Write performance requirements for product development or engineering projects.
Provide feedback to design engineers on customer problems or needs.
Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
Recommend the use of utility or energy services that minimize carbon footprints.
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
Estimate costs or submit bids for engineering, construction, or extraction projects.
Recommend design modifications to eliminate machine or system malfunctions.
Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
Evaluate mechanical designs or prototypes for energy performance or environmental impact.
Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
Solicit new business.
Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.

Related Technology & Tools

Velocity transducers
Wafer dicing saws
Function generators
Anodic wafer bonding systems
Infrared thermography cameras
Contact lithography equipment
Vibration isolators
Fused deposition modeling FDM machines
Coordinate measuring machines CMM
Laser Doppler anemometers
Interferometric microscopes
Laser Doppler velocimeters LDV
Environmental testing chambers
Acoustic emission AE sensors
Evaporation systems
Force transducers
Computed tomography CT systems
Fluorescence spectrometers
Steppers
Digital particle image velocimeters
Multimeters
Vibration control systems
Cryogenic apparatus
Torsional converters
Position transducers
Wafer bonding systems
Torque transducers
Flip-chip wafer bonding systems
Subsonic wind tunnels
X ray tubes
Accelerometers
Aligners
Programmable logic controllers PLC
Rapid thermal processing systems
Oscilloscopes
Nano indentation systems
Wire bonders
Multi-pen plotters
Photoelastic testing machines
Chemical-mechanical polishing equipment
Wire electrical discharge machines
Analog to digital converters
Optical laser scanners
Stylus profilometers
Scanning electron microscopes SEM
Optical sensors
Sputtering systems
Radio frequency sensors
Vibration testers
Projection lithography equipment
Pitot tubes
Strain gauges
X ray radiographic systems
Laser digitizers
Ellipsometers
Digital to analog converters
Heat exchangers
Contact testers
Scanning probe microscopes SPM
Plasma etchers
Dynamic strain indicators
Video editing equipment
Interferometers
Servohydraulic material testing machines
Surface profilometers
Pattern generators
Deep reactive ion etchers DRIE
Vapor deposition tube furnaces
Spin-coaters
Personal computers
Precision positioning tables
Air compressors
Spectrum analyzers
Scanning tunneling microscopes STM
Supersonic wind tunnels
Dynamometers

Dassault Systems SOLIDWORKS
Bill of materials software
Bentley MicroStation
Sigmetrix CETOL 6 Sigma
Mathsoft Mathcad
Blue Ridge Numerics CFDesign
Microsoft PowerPoint
InnovMetric PolyWorks
Rockwell Automation
Microsoft Excel
Autodesk Revit
Microsoft Visual Basic
Microsoft Access
Autodesk AutoCAD
Adobe Systems Adobe Illustrator
Computer aided manufacturing CAM software
National Instruments LabVIEW
Accelerated life testing software
C++
Optical analysis software
PTC Creo Parametric
Statistical software
Dassault Systemes CATIA
ReliaSoft BlockSim
Lambda Research OSLO
Motion analysis software
C
MUMPS M
ReliaSoft Alta 6 Pro
Microsoft Project
Intergraph Plant Design System PDS
ESRI ArcGIS software
Computer numerical control CNC software
Microsoft Visio
Grid generation software
Cost estimation software
Statistical energy analysis SEA software
Finite element method FEM software
G-code
Ladder Logic
ANSYS
Adobe Systems Adobe ActionScript
Design of experiments DOE software
Modal analysis software
UGS I-DEAS
The MathWorks MATLAB
IBM Notes
Rapid prototyping software
MAYA Nastran
Failure assessment software
ReliaSoft Weibull++ 6
Computer aided design and drafting software CADD
Zemax
Hewlett-Packard HP Graphics Language HPGL
Oracle Primavera Enterprise Project Portfolio Management
Human machine interface HMI software
Reverse engineering software
Microsoft Word
Metrix Imageware Surfacer
Failure mode and effects analysis FMEA software
Verilog
Computational fluid dynamics CFD software
Video analysis software
Microsoft Office
Life cycle cost software
1CadCam Unigraphics
Autodesk AutoCAD Civil 3D
COSMOSWorks
Data acquisition software
Minitab
Mesh generation software
Reliability analysis software
SAP