Will “Industrial Green Systems Designer” be Replaced By Robots? 🤔

1.1% Chance of Automation

“Industrial Green Systems Designer” will not be replaced by robots.

This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.

Job Details

The SOC (Standard Occupational Classification) code is 17-2141.00
The Mean Annual Wage in the U.S. is $ 89,800.00
The Mean Hourly Wage is $ 43.00
Currently, there are 285,790 people on this job

☝️ Information based on the reference occupation “Mechanical Engineers”.

Also Known As…

Tasks for “Industrial Green Systems Designer”

Provide feedback to design engineers on customer problems or needs.
Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
Recommend design modifications to eliminate machine or system malfunctions.
Provide technical customer service.
Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
Recommend the use of utility or energy services that minimize carbon footprints.
Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
Solicit new business.
Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
Write performance requirements for product development or engineering projects.
Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
Estimate costs or submit bids for engineering, construction, or extraction projects.
Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
Design test control apparatus or equipment or develop procedures for testing products.
Evaluate mechanical designs or prototypes for energy performance or environmental impact.
Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.

Related Technology & Tools

Scanning tunneling microscopes STM
Wafer bonding systems
Sputtering systems
Oscilloscopes
Air compressors
Digital to analog converters
X ray radiographic systems
Interferometers
Multi-pen plotters
Infrared thermography cameras
Laser Doppler velocimeters LDV
Dynamometers
Aligners
Steppers
Vibration testers
Strain gauges
Dynamic strain indicators
Torsional converters
Torque transducers
Laser Doppler anemometers
Vibration isolators
Digital particle image velocimeters
Fused deposition modeling FDM machines
Subsonic wind tunnels
Scanning electron microscopes SEM
Vapor deposition tube furnaces
Deep reactive ion etchers DRIE
Radio frequency sensors
Contact testers
Force transducers
Video editing equipment
Computed tomography CT systems
Analog to digital converters
Programmable logic controllers PLC
Position transducers
Spin-coaters
Stylus profilometers
Flip-chip wafer bonding systems
Laser digitizers
Anodic wafer bonding systems
Spectrum analyzers
X ray tubes
Pattern generators
Nano indentation systems
Evaporation systems
Wafer dicing saws
Wire electrical discharge machines
Optical laser scanners
Surface profilometers
Fluorescence spectrometers
Wire bonders
Photoelastic testing machines
Cryogenic apparatus
Precision positioning tables
Accelerometers
Function generators
Interferometric microscopes
Multimeters
Pitot tubes
Scanning probe microscopes SPM
Projection lithography equipment
Chemical-mechanical polishing equipment
Plasma etchers
Coordinate measuring machines CMM
Acoustic emission AE sensors
Rapid thermal processing systems
Supersonic wind tunnels
Environmental testing chambers
Personal computers
Ellipsometers
Optical sensors
Contact lithography equipment
Heat exchangers
Servohydraulic material testing machines
Vibration control systems
Velocity transducers

SAP
Microsoft Excel
Lambda Research OSLO
Microsoft Access
Dassault Systems SOLIDWORKS
Mesh generation software
Zemax
Statistical software
Ladder Logic
C
Oracle Primavera Enterprise Project Portfolio Management
UGS I-DEAS
Computer aided manufacturing CAM software
Autodesk AutoCAD
Computer aided design and drafting software CADD
Rapid prototyping software
Microsoft Word
Microsoft PowerPoint
COSMOSWorks
Accelerated life testing software
Adobe Systems Adobe ActionScript
Autodesk AutoCAD Civil 3D
Grid generation software
National Instruments LabVIEW
C++
ESRI ArcGIS software
Reliability analysis software
IBM Notes
Minitab
Design of experiments DOE software
Optical analysis software
Bentley MicroStation
Computer numerical control CNC software
MAYA Nastran
Hewlett-Packard HP Graphics Language HPGL
Statistical energy analysis SEA software
Finite element method FEM software
Motion analysis software
MUMPS M
Modal analysis software
Blue Ridge Numerics CFDesign
ReliaSoft Alta 6 Pro
Autodesk Revit
Video analysis software
The MathWorks MATLAB
Human machine interface HMI software
Microsoft Office
ReliaSoft Weibull++ 6
Life cycle cost software
Intergraph Plant Design System PDS
Adobe Systems Adobe Illustrator
Metrix Imageware Surfacer
Failure assessment software
G-code
Mathsoft Mathcad
Microsoft Visio
ANSYS
Data acquisition software
ReliaSoft BlockSim
1CadCam Unigraphics
Microsoft Project
Microsoft Visual Basic
Computational fluid dynamics CFD software
Failure mode and effects analysis FMEA software
Sigmetrix CETOL 6 Sigma
Cost estimation software
InnovMetric PolyWorks
Bill of materials software
Reverse engineering software
PTC Creo Parametric
Verilog
Dassault Systemes CATIA
Rockwell Automation