Will “Products Mechanical Design Engineer” be Replaced By Robots? 🤔

1.1% Chance of Automation

“Products Mechanical Design Engineer” will not be replaced by robots.

This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.

Job Details

The SOC (Standard Occupational Classification) code is 17-2141.00
The Mean Annual Wage in the U.S. is $ 89,800.00
The Mean Hourly Wage is $ 43.00
Currently, there are 285,790 people on this job

☝️ Information based on the reference occupation “Mechanical Engineers”.

Also Known As…

Tasks for “Products Mechanical Design Engineer”

Write performance requirements for product development or engineering projects.
Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
Recommend design modifications to eliminate machine or system malfunctions.
Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
Provide technical customer service.
Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
Design test control apparatus or equipment or develop procedures for testing products.
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
Evaluate mechanical designs or prototypes for energy performance or environmental impact.
Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
Provide feedback to design engineers on customer problems or needs.
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
Solicit new business.
Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
Estimate costs or submit bids for engineering, construction, or extraction projects.
Recommend the use of utility or energy services that minimize carbon footprints.
Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.

Related Technology & Tools

Acoustic emission AE sensors
Interferometric microscopes
Vibration control systems
Sputtering systems
Velocity transducers
Deep reactive ion etchers DRIE
X ray tubes
Pitot tubes
Wafer dicing saws
Function generators
Surface profilometers
Scanning electron microscopes SEM
Optical laser scanners
Subsonic wind tunnels
Laser Doppler anemometers
Strain gauges
Scanning tunneling microscopes STM
Vapor deposition tube furnaces
Wire electrical discharge machines
Contact lithography equipment
Laser Doppler velocimeters LDV
Dynamic strain indicators
Chemical-mechanical polishing equipment
Stylus profilometers
Nano indentation systems
Heat exchangers
Digital to analog converters
Environmental testing chambers
Projection lithography equipment
Vibration isolators
Spin-coaters
Ellipsometers
Multi-pen plotters
Plasma etchers
Oscilloscopes
Radio frequency sensors
Accelerometers
Analog to digital converters
Torque transducers
Flip-chip wafer bonding systems
Programmable logic controllers PLC
Interferometers
Rapid thermal processing systems
Fused deposition modeling FDM machines
Position transducers
Wafer bonding systems
Laser digitizers
Fluorescence spectrometers
Anodic wafer bonding systems
Digital particle image velocimeters
Coordinate measuring machines CMM
Steppers
Contact testers
Dynamometers
Wire bonders
Torsional converters
Scanning probe microscopes SPM
Pattern generators
Cryogenic apparatus
Spectrum analyzers
Optical sensors
Force transducers
Vibration testers
Aligners
Photoelastic testing machines
Video editing equipment
Multimeters
Servohydraulic material testing machines
X ray radiographic systems
Computed tomography CT systems
Air compressors
Personal computers
Precision positioning tables
Evaporation systems
Infrared thermography cameras
Supersonic wind tunnels

Microsoft Word
Mesh generation software
Lambda Research OSLO
Statistical software
Microsoft Excel
Dassault Systems SOLIDWORKS
Intergraph Plant Design System PDS
C++
Cost estimation software
Computer numerical control CNC software
The MathWorks MATLAB
Microsoft Access
Reliability analysis software
Failure assessment software
Human machine interface HMI software
Adobe Systems Adobe Illustrator
Oracle Primavera Enterprise Project Portfolio Management
Bill of materials software
ReliaSoft BlockSim
Metrix Imageware Surfacer
Design of experiments DOE software
ANSYS
Sigmetrix CETOL 6 Sigma
Computer aided manufacturing CAM software
ESRI ArcGIS software
Data acquisition software
Adobe Systems Adobe ActionScript
Mathsoft Mathcad
Dassault Systemes CATIA
UGS I-DEAS
Bentley MicroStation
Microsoft Office
Hewlett-Packard HP Graphics Language HPGL
ReliaSoft Alta 6 Pro
Optical analysis software
Computer aided design and drafting software CADD
Microsoft Project
Verilog
Rapid prototyping software
Video analysis software
1CadCam Unigraphics
Rockwell Automation
Accelerated life testing software
Autodesk AutoCAD
Minitab
Blue Ridge Numerics CFDesign
Reverse engineering software
Autodesk Revit
Microsoft PowerPoint
C
Grid generation software
Zemax
IBM Notes
Microsoft Visio
Microsoft Visual Basic
Modal analysis software
G-code
MAYA Nastran
National Instruments LabVIEW
Computational fluid dynamics CFD software
ReliaSoft Weibull++ 6
Motion analysis software
PTC Creo Parametric
Life cycle cost software
InnovMetric PolyWorks
MUMPS M
SAP
Autodesk AutoCAD Civil 3D
Statistical energy analysis SEA software
Ladder Logic
Failure mode and effects analysis FMEA software
Finite element method FEM software
COSMOSWorks