Will “Project Engineer” be Replaced By Robots? 🤔
1.1% Chance of Automation
“Project Engineer” will not be replaced by robots.
This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2141.00
- The Mean Annual Wage in the U.S. is $ 89,800.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 285,790 people on this job
☝️ Information based on the reference occupation “Mechanical Engineers”.
Also Known As…
- Mechanical Engineers
- Test Engineer
- Project Engineer
- Product Engineer
- Process Engineer
- Mechanical Engineer
- Mechanical Design Engineer
- Equipment Engineer
- Design Maintenance Engineer
- Design Engineer
- Application Engineer
- Wind Turbine Mechanical Engineer
- Weapons Engineer
- Weapons Designer
- Ventilating Expert
- Ventilating Engineer
- Utilization Engineer
- Tooling Engineer
- Tool Engineer
- Tool Designer
- Tool Design Engineer
- Tool and Die Engineer
- Textile Engineer
- Test Inspection Engineer
- Supplier Quality Engineer (SQE)
- Stress Analyst
- Sheet Metal Engineer
- Servomechanism Designer
- Roller Coaster Engineer
- Roller Coaster Designer
- Refrigeration Engineer
- Products Mechanical Design Engineer
- Plant Equipment Engineer
- Motorcycle Designer
- Mechanical Research Engineer
- Mechanical Equipment Test Engineer
- Mechanical Development Engineer
- Mechanical Design Facilities or Products Engineer
- Machine Tool Designer
- Machine Design Engineer
- Internal Combustion Engineer
- Installation Engineer
- Industrial Retrofit Designer
- Industrial Green Systems Designer
- Hydroelectric Plant Mechanical Engineer
- Hydraulic Engineer
- HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
- HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
- HVAC Engineer (Heating Ventilation Air Conditioning Engineer)
- HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)
- Heating Engineer
- Heating and Cooling Systems Engineer
- Geothermal Power Generation Mechanical Engineer
- Field Service Engineer
- Failure Analysis Technician
- Facilities Mechanical Design Engineer
- Erecting Engineer
- Engineer
- Engine Designer
- Electro-Mechanical Engineer
- Dust Control Engineer
- Distribution Engineer
- Diesel Retrofit Designer
- Diesel Engineer
- Cryogenics Engineer
- Cooling and Heating Systems Design Engineer
- Combustion Engineer
- Car Designer
- Brake Engineer
- Body Engineer
- Automation Engineer
- Auto Research Engineer
- Air Conditioning Engineer
Tasks for “Project Engineer”
- Recommend design modifications to eliminate machine or system malfunctions.
- Write performance requirements for product development or engineering projects.
- Provide technical customer service.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Solicit new business.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Design test control apparatus or equipment or develop procedures for testing products.
- Provide feedback to design engineers on customer problems or needs.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
Related Technology & Tools
- Anodic wafer bonding systems
- Vapor deposition tube furnaces
- Pattern generators
- Servohydraulic material testing machines
- Scanning tunneling microscopes STM
- Torque transducers
- Subsonic wind tunnels
- X ray tubes
- Surface profilometers
- Laser Doppler velocimeters LDV
- Dynamic strain indicators
- Radio frequency sensors
- Spin-coaters
- Vibration isolators
- Ellipsometers
- Air compressors
- Dynamometers
- Wafer dicing saws
- Cryogenic apparatus
- Contact testers
- Personal computers
- Aligners
- Digital to analog converters
- Optical sensors
- Wire electrical discharge machines
- Supersonic wind tunnels
- Stylus profilometers
- Scanning electron microscopes SEM
- Fluorescence spectrometers
- Projection lithography equipment
- Photoelastic testing machines
- Acoustic emission AE sensors
- Interferometric microscopes
- Environmental testing chambers
- Wafer bonding systems
- Laser digitizers
- Position transducers
- Scanning probe microscopes SPM
- Analog to digital converters
- Programmable logic controllers PLC
- Vibration testers
- Deep reactive ion etchers DRIE
- Multimeters
- Optical laser scanners
- Force transducers
- Plasma etchers
- Fused deposition modeling FDM machines
- Strain gauges
- Accelerometers
- Digital particle image velocimeters
- Precision positioning tables
- X ray radiographic systems
- Evaporation systems
- Coordinate measuring machines CMM
- Chemical-mechanical polishing equipment
- Spectrum analyzers
- Flip-chip wafer bonding systems
- Function generators
- Rapid thermal processing systems
- Pitot tubes
- Video editing equipment
- Torsional converters
- Interferometers
- Nano indentation systems
- Computed tomography CT systems
- Velocity transducers
- Steppers
- Wire bonders
- Heat exchangers
- Multi-pen plotters
- Vibration control systems
- Infrared thermography cameras
- Sputtering systems
- Contact lithography equipment
- Oscilloscopes
- Laser Doppler anemometers
- Dassault Systems SOLIDWORKS
- Computer aided design and drafting software CADD
- UGS I-DEAS
- Optical analysis software
- C
- Mathsoft Mathcad
- Ladder Logic
- Microsoft Excel
- Statistical software
- Bentley MicroStation
- PTC Creo Parametric
- Blue Ridge Numerics CFDesign
- Computer aided manufacturing CAM software
- Accelerated life testing software
- Finite element method FEM software
- Adobe Systems Adobe ActionScript
- Metrix Imageware Surfacer
- Reverse engineering software
- IBM Notes
- COSMOSWorks
- Microsoft Project
- Life cycle cost software
- Video analysis software
- Failure assessment software
- Microsoft Office
- Rockwell Automation
- Autodesk AutoCAD
- Zemax
- ReliaSoft Weibull++ 6
- Microsoft Access
- ReliaSoft BlockSim
- Dassault Systemes CATIA
- Computational fluid dynamics CFD software
- Reliability analysis software
- G-code
- C++
- Rapid prototyping software
- Human machine interface HMI software
- Autodesk AutoCAD Civil 3D
- 1CadCam Unigraphics
- Statistical energy analysis SEA software
- Hewlett-Packard HP Graphics Language HPGL
- MAYA Nastran
- National Instruments LabVIEW
- Adobe Systems Adobe Illustrator
- Minitab
- Cost estimation software
- Sigmetrix CETOL 6 Sigma
- Bill of materials software
- Data acquisition software
- Failure mode and effects analysis FMEA software
- InnovMetric PolyWorks
- SAP
- Autodesk Revit
- Modal analysis software
- Microsoft Word
- Verilog
- Mesh generation software
- The MathWorks MATLAB
- ESRI ArcGIS software
- Computer numerical control CNC software
- Intergraph Plant Design System PDS
- Lambda Research OSLO
- Microsoft Visio
- MUMPS M
- Grid generation software
- Oracle Primavera Enterprise Project Portfolio Management
- Microsoft PowerPoint
- Design of experiments DOE software
- Microsoft Visual Basic
- ANSYS
- ReliaSoft Alta 6 Pro
- Motion analysis software