-
Follow special cargo-related procedures, such as checking refrigeration systems for frozen foods or providing food or water for livestock.
-
Wrap and secure goods using pads, packing paper, containers, or straps.
-
Inspect loads to ensure that cargo is secure.
-
Crank trailer landing gear up or down to safely secure vehicles.
-
Follow appropriate safety procedures for transporting dangerous goods.
-
Couple or uncouple trailers by changing trailer jack positions, connecting or disconnecting air or electrical lines, or manipulating fifth-wheel locks.
-
Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
-
Check conditions of trailers after contents have been unloaded to ensure that there has been no damage.
-
Obtain receipts or signatures for delivered goods and collect payment for services when required.
-
Report vehicle defects, accidents, traffic violations, or damage to the vehicles.
-
Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
-
Drive trucks with capacities greater than 13 tons, including tractor-trailer combinations, to transport and deliver products, livestock, or other materials.
-
Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order.
-
Remove debris from loaded trailers.
-
Inventory and inspect goods to be moved to determine quantities and conditions.
-
Install or remove special equipment, such as tire chains, grader blades, plow blades, or sanders.
-
Secure cargo for transport, using ropes, blocks, chain, binders, or covers.
-
Check all load-related documentation for completeness and accuracy.
-
Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid, performing minor repairs, or washing trucks.
-
Perform emergency roadside repairs, such as changing tires or installing light bulbs, tire chains, or spark plugs.
-
Operate idle reduction systems or auxiliary power systems to generate power from alternative sources, such as fuel cells, to reduce idling time, to heat or cool truck cabins, or to provide power for other equipment.
-
Read bills of lading to determine assignment details.
-
Plan or adjust routes based on changing conditions, using computer equipment, global positioning systems (GPS) equipment, or other navigation devices, to minimize fuel consumption and carbon emissions.
-
Drive trucks to weigh stations before and after loading and along routes in compliance with state regulations.
-
Give directions to laborers who are packing goods and moving them onto trailers.
-
Read and interpret maps to determine vehicle routes.
-
Load or unload trucks or help others with loading or unloading, using special loading-related equipment or other equipment as necessary.
-
Operate equipment, such as truck cab computers, CB radios, phones, or global positioning systems (GPS) equipment to exchange necessary information with bases, supervisors, or other drivers.
-
Collect delivery instructions from appropriate sources, verifying instructions and routes.