-
Couple or uncouple trailers by changing trailer jack positions, connecting or disconnecting air or electrical lines, or manipulating fifth-wheel locks.
-
Read and interpret maps to determine vehicle routes.
-
Give directions to laborers who are packing goods and moving them onto trailers.
-
Follow special cargo-related procedures, such as checking refrigeration systems for frozen foods or providing food or water for livestock.
-
Drive trucks to weigh stations before and after loading and along routes in compliance with state regulations.
-
Perform emergency roadside repairs, such as changing tires or installing light bulbs, tire chains, or spark plugs.
-
Check conditions of trailers after contents have been unloaded to ensure that there has been no damage.
-
Follow appropriate safety procedures for transporting dangerous goods.
-
Inspect loads to ensure that cargo is secure.
-
Obtain receipts or signatures for delivered goods and collect payment for services when required.
-
Crank trailer landing gear up or down to safely secure vehicles.
-
Operate idle reduction systems or auxiliary power systems to generate power from alternative sources, such as fuel cells, to reduce idling time, to heat or cool truck cabins, or to provide power for other equipment.
-
Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
-
Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
-
Read bills of lading to determine assignment details.
-
Check all load-related documentation for completeness and accuracy.
-
Secure cargo for transport, using ropes, blocks, chain, binders, or covers.
-
Inventory and inspect goods to be moved to determine quantities and conditions.
-
Wrap and secure goods using pads, packing paper, containers, or straps.
-
Drive trucks with capacities greater than 13 tons, including tractor-trailer combinations, to transport and deliver products, livestock, or other materials.
-
Remove debris from loaded trailers.
-
Operate equipment, such as truck cab computers, CB radios, phones, or global positioning systems (GPS) equipment to exchange necessary information with bases, supervisors, or other drivers.
-
Report vehicle defects, accidents, traffic violations, or damage to the vehicles.
-
Plan or adjust routes based on changing conditions, using computer equipment, global positioning systems (GPS) equipment, or other navigation devices, to minimize fuel consumption and carbon emissions.
-
Collect delivery instructions from appropriate sources, verifying instructions and routes.
-
Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order.
-
Load or unload trucks or help others with loading or unloading, using special loading-related equipment or other equipment as necessary.
-
Install or remove special equipment, such as tire chains, grader blades, plow blades, or sanders.
-
Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid, performing minor repairs, or washing trucks.