Will “Bill Board Poster” be Replaced By Robots? 🤔
87% Chance of Automation
“Bill Board Poster” will probably be replaced by robots.
This job is ranked #505 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Cover interior walls or ceilings of rooms with decorative wallpaper or fabric, or attach advertising posters on surfaces such as walls and billboards. May remove old materials or prepare surfaces to be papered.
Job Details
- The SOC (Standard Occupational Classification) code is 47-2142.00
- The Mean Annual Wage in the U.S. is $ 36,470.00
- The Mean Hourly Wage is $ 17.00
- Currently, there are 3,190 people on this job
☝️ Information based on the reference occupation “Paperhangers”.
Also Known As…
- Paperhangers
- Wallpaper Installer
- Wallpaper Hanger
- Wall Covering Installer
- Wall Covering Contractor
- Vinyl Hanger
- Paperhanger
- Paper Hanger
- Hanger
- Bill Poster
- Bill Board Poster
- Wallpaperer
- Wallcovering Hanger
- Vinyl Installer
- Paperhanger Apprentice
- Paperhanger and Painter
- Interior Decorator, Paperhanging
- Billboard Poster
- Bill Poster Installer
Tasks for “Bill Board Poster”
- Trim rough edges from strips, using straightedges and trimming knives.
- Set up equipment, such as pasteboards and scaffolds.
- Smooth rough spots on walls and ceilings, using sandpaper.
- Remove old paper, using water, steam machines, or solvents and scrapers.
- Smooth strips or sections of paper with brushes or rollers to remove wrinkles and bubbles and to smooth joints.
- Trim excess material at ceilings or baseboards, using knives.
- Apply acetic acid to damp plaster to prevent lime from bleeding through paper.
- Cover interior walls and ceilings of rooms with decorative wallpaper or fabric, using hand tools.
- Fill holes, cracks, and other surface imperfections preparatory to covering surfaces.
- Measure and cut strips from rolls of wallpaper or fabric, using shears or razors.
- Mark vertical guidelines on walls to align strips, using plumb bobs and chalk lines.
- Staple or tack advertising posters onto fences, walls, billboards, or poles.
- Apply sizing to seal surfaces and maximize adhesion of coverings to surfaces.
- Place strips or sections of paper on surfaces, aligning section edges and patterns.
- Measure surfaces or review work orders to estimate the quantities of materials needed.
- Apply adhesives to the backs of paper strips, using brushes, or dunk strips of prepasted wallcovering in water, wiping off any excess adhesive.
- Mix paste, using paste powder and water, and brush paste onto surfaces.
- Check finished wallcoverings for proper alignment, pattern matching, and neatness of seams.
- Remove paint, varnish, dirt, and grease from surfaces, using paint remover and water soda solutions.
- Apply thinned glue to waterproof porous surfaces, using brushes, rollers, or pasting machines.
Related Technology & Tools
- Wallpaper shears
- Seam rollers
- Double cutting wallpaper knives
- Rolling scaffolds
- Wallpaper removal sprayers
- Length measuring counters
- Hand trowels
- Plumb lines
- Broad knives
- Break off knives
- Pneumatic staplers
- Wallpaper steamers
- Extension ladders
- Perforating rollers
- Chalk line markers
- Pulleys
- Measuring tapes
- Paste syringes
- Paste beaters
- Wallpaper smoothers
- Paste brushes
- Drywall power sanders
- Wallpaper pasting machines
- Border holdups
- Step ladders
- Paste board clamps
- Aluminum straightedges
- Straight edge trimmers
- Paste tables
- Wallpaper scrapers
- Razor blade dispensers
- Personal computers
- Wallpaper pasting boards
- Laser levels
- Laptop computers
- Wallpaper smoothing brushes
- Wallpaper booking tables
- Electric bucket heaters
- Wallpaper scissors
- Tablet computers
- PlanSwift
- A-Systems Jobview
- Turtle Creek Software Goldenseal
- Construction Software Center EasyEst
- On Center Quick Bid
- Microsoft Excel