Will “Avionics Test Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Avionics Test Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Avionics Test Technician
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Avionics Test Technician”
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Finish vehicle instrumentation and deinstrumentation.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Exchange cooling system components in various vehicles.
- Adjust, repair or replace faulty components of test setups and equipment.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
Related Technology & Tools
- Ball peen hammers
- Dividers
- Mill files
- Pyrotechnic initiators
- Bottoming taps
- Theodolites
- Vertical turret lathes VTL
- Power screwdrivers
- Depth micrometers
- Strain gauge balances
- Body harnesses
- Safety goggles
- Digital height gauges
- Accelerometer sensors
- Socket wrenches
- Box end wrenches
- Prick punches
- Round files
- Flow meters
- Aviation snips
- Steel rules
- X ray inspection equipment
- Computer numerical controlled CNC milling machines
- Shakers
- Vixen files
- Borescopes
- Half-round files
- Drive punches
- Precision files
- Thread gauges
- Pressure gauges
- Riveting tools
- Spring calipers
- Accelerometers
- Knife files
- Center punches
- Alignment squares
- Drill presses
- Digital calipers
- Wire crimpers
- Taper taps
- Coordinate measuring machines CMM
- Hydrasets
- Straightedges
- Scribers
- Aligning punches
- Reed and Prince screwdrivers
- Plug taps
- Hand snips
- Force transducers
- Multi-axis mills
- Hook spanner wrenches
- Welding torches
- Soft face hammers
- Scaffolding
- Bubble emission inspection equipment
- Torque wrenches
- Open end wrenches
- Split dies
- Flat head screwdrivers
- Magnetic particle inspection equipment
- Overhead cranes
- Dial calipers
- Gyroscopes
- Fire extinguishers
- Brazing hearths
- Torx drivers
- Personal computers
- Skin mills
- Fluorescent penetrant inspection equipment
- Straight chisels
- Flat files
- Digital force gauges
- Tri-squares
- Soldering irons
- Depth gauges
- Micrometers
- Paint booths
- Thermocouples
- Impact hammers
- Annealing ovens
- Voltmeters
- Vibration testers
- Thickness gauges
- Small hole gauges
- Forklifts
- Protractors
- Plug gauges
- Gantry mills
- Pin punches
- Gamma ray testing equipment
- Go/no-go gauges
- Shot peening equipment
- V blocks
- Telescoping gauges
- Dye penetrant inspection equipment
- Air drills
- Combination wrenches
- Electronic torque testers
- Shielded arc welding tools
- Snap gauges
- Hacksaws
- Twist drills
- Bore gauges
- Ultrasonic inspection equipment
- Vibration transducers
- Purifying respirators
- Mallets
- Lasers
- Bleeder wrenches
- Offset screwdrivers
- Safety lanyards
- Telescopes
- Planer gauges
- Layout compasses
- Vibration tables
- Digital torque wrenches
- Infrared inspection equipment
- Computerized numerical control CNC lathes
- Gauge blocks
- Adjustable wrenches
- Countersinks
- Bench vises
- Air-supplying respirators
- Gas arc welding equipment
- Safety wire pliers
- Terminal computers
- Brazing equipment
- Mass spectrometers
- Vernier calipers
- Allen wrenches
- Eddy current inspection equipment
- Microsoft Office
- Microsoft Word
- Oracle Java
- Data acquisition software
- Structured query language SQL
- Microsoft Visio
- Computer aided design CAD software
- Computerized numerical control CNC software
- Microsoft SQL Server
- UNIX
- Inventory software
- Extensible markup language XML
- Microsoft Excel
- Vibration analysis software
- Microsoft PowerPoint