Will “Wind Tunnel Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Wind Tunnel Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702, where higher means less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Wind Tunnel Technician”
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Finish vehicle instrumentation and deinstrumentation.
- Exchange cooling system components in various vehicles.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Adjust, repair or replace faulty components of test setups and equipment.
Related Technology & Tools
- Center punches
- Digital height gauges
- Adjustable wrenches
- Air-supplying respirators
- Micrometers
- Shakers
- Prick punches
- Gauge blocks
- Layout compasses
- Round files
- Drill presses
- Wire crimpers
- Digital calipers
- Box end wrenches
- Lasers
- Digital torque wrenches
- Ball peen hammers
- Electronic torque testers
- Snap gauges
- Thermocouples
- Pyrotechnic initiators
- Hacksaws
- Telescopes
- Dividers
- Coordinate measuring machines CMM
- Gamma ray testing equipment
- Hand snips
- Ultrasonic inspection equipment
- Brazing hearths
- Half-round files
- Shot peening equipment
- Digital force gauges
- Dye penetrant inspection equipment
- Fluorescent penetrant inspection equipment
- Drive punches
- Socket wrenches
- Vernier calipers
- Personal computers
- Depth micrometers
- Infrared inspection equipment
- V blocks
- Riveting tools
- Plug taps
- Small hole gauges
- Gyroscopes
- Split dies
- Terminal computers
- Multi-axis mills
- Vertical turret lathes VTL
- Vibration testers
- Spring calipers
- Shielded arc welding tools
- Accelerometers
- Mill files
- Torx drivers
- Purifying respirators
- Straightedges
- Bench vises
- Flat files
- Knife files
- Aviation snips
- Force transducers
- Combination wrenches
- Scribers
- Reed and Prince screwdrivers
- Bore gauges
- Alignment squares
- Bleeder wrenches
- Fire extinguishers
- Pin punches
- Borescopes
- Computerized numerical control CNC lathes
- Strain gauge balances
- Torque wrenches
- Bottoming taps
- Accelerometer sensors
- Brazing equipment
- Vibration tables
- Dial calipers
- Straight chisels
- Magnetic particle inspection equipment
- Power screwdrivers
- Allen wrenches
- Voltmeters
- Safety wire pliers
- Computer numerical controlled CNC milling machines
- Safety goggles
- Thickness gauges
- Precision files
- Plug gauges
- Vixen files
- Gas arc welding equipment
- Telescoping gauges
- Scaffolding
- Flow meters
- Pressure gauges
- Aligning punches
- Impact hammers
- Depth gauges
- Twist drills
- Thread gauges
- Skin mills
- Soldering irons
- Gantry mills
- Taper taps
- Tri-squares
- Air drills
- Mass spectrometers
- X ray inspection equipment
- Protractors
- Forklifts
- Overhead cranes
- Hook spanner wrenches
- Soft face hammers
- Planer gauges
- Bubble emission inspection equipment
- Steel rules
- Annealing ovens
- Eddy current inspection equipment
- Safety lanyards
- Flat head screwdrivers
- Body harnesses
- Countersinks
- Theodolites
- Go/no-go gauges
- Paint booths
- Welding torches
- Mallets
- Offset screwdrivers
- Open end wrenches
- Hydrasets
- Vibration transducers
- Inventory software
- Microsoft Word
- Extensible markup language XML
- UNIX
- Microsoft PowerPoint
- Microsoft Excel
- Microsoft Office
- Oracle Java
- Vibration analysis software
- Microsoft Visio
- Computer aided design CAD software
- Computerized numerical control CNC software
- Structured query language SQL
- Data acquisition software
- Microsoft SQL Server