Will “Flight Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Flight Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Flight Technician”
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Adjust, repair or replace faulty components of test setups and equipment.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Finish vehicle instrumentation and deinstrumentation.
- Exchange cooling system components in various vehicles.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
Related Technology & Tools
- Small hole gauges
- Overhead cranes
- Terminal computers
- Magnetic particle inspection equipment
- Body harnesses
- Straightedges
- Bubble emission inspection equipment
- Planer gauges
- Pressure gauges
- Flat files
- X ray inspection equipment
- Gyroscopes
- Gas arc welding equipment
- Mass spectrometers
- Depth gauges
- Annealing ovens
- Straight chisels
- Electronic torque testers
- Riveting tools
- Twist drills
- Socket wrenches
- Adjustable wrenches
- Hacksaws
- Box end wrenches
- Soft face hammers
- Gauge blocks
- Countersinks
- Vibration tables
- Mill files
- Welding torches
- Center punches
- Coordinate measuring machines CMM
- Layout compasses
- Computer numerical controlled CNC milling machines
- Drill presses
- Brazing equipment
- Hand snips
- Ultrasonic inspection equipment
- Reed and Prince screwdrivers
- Combination wrenches
- Offset screwdrivers
- Tri-squares
- Brazing hearths
- Thread gauges
- Mallets
- Vibration testers
- Lasers
- Dial calipers
- Half-round files
- Plug taps
- Strain gauge balances
- Pin punches
- Safety wire pliers
- Hydrasets
- Shielded arc welding tools
- Aligning punches
- Precision files
- V blocks
- Protractors
- Torx drivers
- Safety lanyards
- Infrared inspection equipment
- Vertical turret lathes VTL
- Bore gauges
- Forklifts
- Bottoming taps
- Computerized numerical control CNC lathes
- Gantry mills
- Flat head screwdrivers
- Fluorescent penetrant inspection equipment
- Plug gauges
- Prick punches
- Theodolites
- Eddy current inspection equipment
- Thickness gauges
- Aviation snips
- Thermocouples
- Shakers
- Vernier calipers
- Ball peen hammers
- Dye penetrant inspection equipment
- Force transducers
- Air-supplying respirators
- Alignment squares
- Taper taps
- Hook spanner wrenches
- Accelerometers
- Skin mills
- Power screwdrivers
- Safety goggles
- Personal computers
- Paint booths
- Bench vises
- Digital height gauges
- Go/no-go gauges
- Allen wrenches
- Digital torque wrenches
- Torque wrenches
- Digital calipers
- Vibration transducers
- Gamma ray testing equipment
- Purifying respirators
- Steel rules
- Borescopes
- Scribers
- Vixen files
- Pyrotechnic initiators
- Impact hammers
- Telescopes
- Telescoping gauges
- Open end wrenches
- Multi-axis mills
- Shot peening equipment
- Knife files
- Drive punches
- Scaffolding
- Wire crimpers
- Spring calipers
- Bleeder wrenches
- Round files
- Snap gauges
- Flow meters
- Voltmeters
- Digital force gauges
- Micrometers
- Split dies
- Accelerometer sensors
- Soldering irons
- Air drills
- Dividers
- Fire extinguishers
- Depth micrometers
- UNIX
- Microsoft SQL Server
- Oracle Java
- Microsoft Excel
- Data acquisition software
- Microsoft Visio
- Computerized numerical control CNC software
- Structured query language SQL
- Microsoft Office
- Microsoft PowerPoint
- Vibration analysis software
- Inventory software
- Extensible markup language XML
- Computer aided design CAD software
- Microsoft Word