Will “Certified Technician Specialist” be Replaced By Robots? 🤔
48% Chance of Automation
“Certified Technician Specialist” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Certified Technician Specialist”
- Record and interpret test data on parts, assemblies, and mechanisms.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Finish vehicle instrumentation and deinstrumentation.
- Exchange cooling system components in various vehicles.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Adjust, repair or replace faulty components of test setups and equipment.
Related Technology & Tools
- Eddy current inspection equipment
- Telescopes
- Vibration transducers
- Borescopes
- Ball peen hammers
- Air drills
- Steel rules
- Hacksaws
- Gantry mills
- Drill presses
- Digital force gauges
- Dividers
- Dial calipers
- Bleeder wrenches
- Hydrasets
- Soft face hammers
- Hook spanner wrenches
- Pin punches
- Depth gauges
- Force transducers
- Pressure gauges
- Alignment squares
- Open end wrenches
- Tri-squares
- Vertical turret lathes VTL
- Dye penetrant inspection equipment
- Bore gauges
- Overhead cranes
- Terminal computers
- Torx drivers
- Gas arc welding equipment
- Fluorescent penetrant inspection equipment
- Flat files
- Thermocouples
- Shielded arc welding tools
- Small hole gauges
- Safety goggles
- Brazing hearths
- Box end wrenches
- Snap gauges
- Combination wrenches
- Vernier calipers
- Round files
- Aligning punches
- Bottoming taps
- Depth micrometers
- Coordinate measuring machines CMM
- Center punches
- Shot peening equipment
- Digital calipers
- Aviation snips
- Hand snips
- Impact hammers
- Annealing ovens
- Accelerometers
- Knife files
- Mallets
- Countersinks
- Half-round files
- Safety wire pliers
- Personal computers
- Thickness gauges
- Mass spectrometers
- Prick punches
- Computer numerical controlled CNC milling machines
- Vibration tables
- Power screwdrivers
- Straight chisels
- Safety lanyards
- Shakers
- Split dies
- Gyroscopes
- Scribers
- Bench vises
- Micrometers
- Computerized numerical control CNC lathes
- Straightedges
- Lasers
- Multi-axis mills
- Plug gauges
- Offset screwdrivers
- Thread gauges
- Flat head screwdrivers
- Taper taps
- Plug taps
- Brazing equipment
- Accelerometer sensors
- Layout compasses
- Infrared inspection equipment
- Paint booths
- Gamma ray testing equipment
- Body harnesses
- Socket wrenches
- Go/no-go gauges
- Telescoping gauges
- Spring calipers
- Gauge blocks
- Flow meters
- Allen wrenches
- Purifying respirators
- Theodolites
- Strain gauge balances
- Reed and Prince screwdrivers
- Ultrasonic inspection equipment
- Air-supplying respirators
- Adjustable wrenches
- Welding torches
- Electronic torque testers
- V blocks
- Twist drills
- Precision files
- Digital torque wrenches
- Drive punches
- Scaffolding
- Magnetic particle inspection equipment
- Vixen files
- Forklifts
- Skin mills
- Digital height gauges
- Fire extinguishers
- Riveting tools
- Planer gauges
- Soldering irons
- Torque wrenches
- Protractors
- Wire crimpers
- Pyrotechnic initiators
- Mill files
- Vibration testers
- Voltmeters
- X ray inspection equipment
- Bubble emission inspection equipment
- Structured query language SQL
- Microsoft Office
- Microsoft SQL Server
- Microsoft Excel
- UNIX
- Extensible markup language XML
- Inventory software
- Microsoft PowerPoint
- Vibration analysis software
- Computer aided design CAD software
- Microsoft Word
- Computerized numerical control CNC software
- Oracle Java
- Data acquisition software
- Microsoft Visio