Will “Calibration Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Calibration Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Calibration Technician
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Calibration Technician”
- Finish vehicle instrumentation and deinstrumentation.
- Adjust, repair or replace faulty components of test setups and equipment.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Exchange cooling system components in various vehicles.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Record and interpret test data on parts, assemblies, and mechanisms.
Related Technology & Tools
- Alignment squares
- Precision files
- Offset screwdrivers
- Flat head screwdrivers
- Infrared inspection equipment
- Digital calipers
- Scribers
- Half-round files
- Torque wrenches
- Dial calipers
- Vertical turret lathes VTL
- Ball peen hammers
- Brazing hearths
- Plug taps
- Purifying respirators
- Micrometers
- Gyroscopes
- Countersinks
- Hydrasets
- Overhead cranes
- Pin punches
- Digital torque wrenches
- Paint booths
- Mill files
- Spring calipers
- Magnetic particle inspection equipment
- Twist drills
- Socket wrenches
- Riveting tools
- Split dies
- Bleeder wrenches
- Torx drivers
- Dividers
- Shot peening equipment
- Theodolites
- V blocks
- Bubble emission inspection equipment
- Round files
- Eddy current inspection equipment
- Box end wrenches
- Vibration testers
- Mass spectrometers
- Telescopes
- Vibration transducers
- Adjustable wrenches
- Voltmeters
- Computer numerical controlled CNC milling machines
- Vernier calipers
- Hacksaws
- Go/no-go gauges
- Reed and Prince screwdrivers
- Ultrasonic inspection equipment
- Layout compasses
- Thread gauges
- Straight chisels
- Open end wrenches
- Depth micrometers
- Taper taps
- Drive punches
- Knife files
- Gantry mills
- Small hole gauges
- Skin mills
- Plug gauges
- Drill presses
- Mallets
- Pyrotechnic initiators
- Straightedges
- Air-supplying respirators
- Digital force gauges
- Bench vises
- Flow meters
- Planer gauges
- Gauge blocks
- Tri-squares
- Annealing ovens
- Safety wire pliers
- Fire extinguishers
- Aviation snips
- Protractors
- Combination wrenches
- Digital height gauges
- Depth gauges
- X ray inspection equipment
- Aligning punches
- Steel rules
- Soft face hammers
- Scaffolding
- Hand snips
- Center punches
- Snap gauges
- Hook spanner wrenches
- Safety lanyards
- Pressure gauges
- Lasers
- Personal computers
- Telescoping gauges
- Terminal computers
- Brazing equipment
- Soldering irons
- Vixen files
- Electronic torque testers
- Accelerometer sensors
- Strain gauge balances
- Computerized numerical control CNC lathes
- Air drills
- Power screwdrivers
- Shielded arc welding tools
- Fluorescent penetrant inspection equipment
- Coordinate measuring machines CMM
- Thermocouples
- Bottoming taps
- Flat files
- Shakers
- Gamma ray testing equipment
- Prick punches
- Borescopes
- Welding torches
- Thickness gauges
- Vibration tables
- Impact hammers
- Wire crimpers
- Bore gauges
- Allen wrenches
- Force transducers
- Multi-axis mills
- Body harnesses
- Forklifts
- Accelerometers
- Dye penetrant inspection equipment
- Gas arc welding equipment
- Safety goggles
- Extensible markup language XML
- Microsoft Word
- Data acquisition software
- Vibration analysis software
- Computerized numerical control CNC software
- Structured query language SQL
- Microsoft Visio
- Oracle Java
- Microsoft Excel
- Microsoft Office
- Microsoft PowerPoint
- Microsoft SQL Server
- Inventory software
- Computer aided design CAD software
- UNIX