Will “Aerospace Engineering and Operations Technicians” be Replaced By Robots? 🤔
48% Chance of Automation
“Aerospace Engineering and Operations Technicians” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
Also Known As…
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Aerospace Engineering and Operations Technicians”
- Finish vehicle instrumentation and deinstrumentation.
- Adjust, repair or replace faulty components of test setups and equipment.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Exchange cooling system components in various vehicles.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Record and interpret test data on parts, assemblies, and mechanisms.
Related Technology & Tools
- Vertical turret lathes VTL
- Terminal computers
- Ball peen hammers
- Layout compasses
- Thermocouples
- Air drills
- Bottoming taps
- Brazing hearths
- Plug taps
- Socket wrenches
- Center punches
- Digital calipers
- Small hole gauges
- Adjustable wrenches
- Computerized numerical control CNC lathes
- Drill presses
- Overhead cranes
- Annealing ovens
- Voltmeters
- Digital force gauges
- Skin mills
- Snap gauges
- Gyroscopes
- Open end wrenches
- Safety wire pliers
- Shakers
- Thickness gauges
- Body harnesses
- Straightedges
- Aligning punches
- Straight chisels
- Impact hammers
- Vibration tables
- Go/no-go gauges
- Torx drivers
- Mill files
- Soldering irons
- Magnetic particle inspection equipment
- Wire crimpers
- Brazing equipment
- Soft face hammers
- Infrared inspection equipment
- Depth micrometers
- Hacksaws
- Vixen files
- Fluorescent penetrant inspection equipment
- Mass spectrometers
- Accelerometer sensors
- Forklifts
- Spring calipers
- Reed and Prince screwdrivers
- Knife files
- Alignment squares
- Torque wrenches
- Mallets
- Digital height gauges
- Half-round files
- X ray inspection equipment
- Pyrotechnic initiators
- Micrometers
- Pin punches
- Offset screwdrivers
- Eddy current inspection equipment
- Bubble emission inspection equipment
- Taper taps
- Scaffolding
- Twist drills
- V blocks
- Depth gauges
- Purifying respirators
- Theodolites
- Riveting tools
- Telescopes
- Round files
- Protractors
- Power screwdrivers
- Hand snips
- Thread gauges
- Flat head screwdrivers
- Welding torches
- Paint booths
- Bleeder wrenches
- Multi-axis mills
- Box end wrenches
- Hook spanner wrenches
- Strain gauge balances
- Allen wrenches
- Coordinate measuring machines CMM
- Safety goggles
- Shot peening equipment
- Tri-squares
- Vibration transducers
- Gas arc welding equipment
- Force transducers
- Borescopes
- Electronic torque testers
- Air-supplying respirators
- Plug gauges
- Pressure gauges
- Scribers
- Safety lanyards
- Flat files
- Gantry mills
- Gauge blocks
- Bench vises
- Planer gauges
- Hydrasets
- Accelerometers
- Bore gauges
- Dial calipers
- Dye penetrant inspection equipment
- Split dies
- Steel rules
- Telescoping gauges
- Ultrasonic inspection equipment
- Fire extinguishers
- Personal computers
- Drive punches
- Dividers
- Vernier calipers
- Countersinks
- Vibration testers
- Shielded arc welding tools
- Computer numerical controlled CNC milling machines
- Flow meters
- Lasers
- Gamma ray testing equipment
- Precision files
- Combination wrenches
- Prick punches
- Digital torque wrenches
- Aviation snips
- Data acquisition software
- Microsoft Word
- Computer aided design CAD software
- Computerized numerical control CNC software
- Structured query language SQL
- Oracle Java
- Microsoft PowerPoint
- Microsoft SQL Server
- UNIX
- Microsoft Excel
- Microsoft Office
- Vibration analysis software
- Microsoft Visio
- Extensible markup language XML
- Inventory software