Will “Data Acquisition Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Data Acquisition Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Data Acquisition Technician”
- Adjust, repair or replace faulty components of test setups and equipment.
- Exchange cooling system components in various vehicles.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Finish vehicle instrumentation and deinstrumentation.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
Related Technology & Tools
- Snap gauges
- Scribers
- Brazing equipment
- Thermocouples
- Vixen files
- Adjustable wrenches
- Spring calipers
- Socket wrenches
- Infrared inspection equipment
- Aligning punches
- Micrometers
- Layout compasses
- Gyroscopes
- Riveting tools
- Thread gauges
- Mallets
- Power screwdrivers
- Strain gauge balances
- Wire crimpers
- Digital force gauges
- Plug gauges
- Gantry mills
- Force transducers
- Hook spanner wrenches
- Precision files
- Hydrasets
- Air-supplying respirators
- Bleeder wrenches
- Safety lanyards
- Electronic torque testers
- Brazing hearths
- X ray inspection equipment
- Fire extinguishers
- Shakers
- Magnetic particle inspection equipment
- Flat files
- Bubble emission inspection equipment
- Scaffolding
- Pin punches
- Forklifts
- Straightedges
- Small hole gauges
- Drill presses
- Torque wrenches
- Voltmeters
- Center punches
- Vibration tables
- Gas arc welding equipment
- Vertical turret lathes VTL
- Bottoming taps
- Digital height gauges
- Torx drivers
- Taper taps
- Bore gauges
- Ultrasonic inspection equipment
- Coordinate measuring machines CMM
- Protractors
- Safety goggles
- Steel rules
- Half-round files
- Impact hammers
- Flat head screwdrivers
- Telescopes
- Depth gauges
- V blocks
- Terminal computers
- Paint booths
- Mill files
- Twist drills
- Knife files
- Depth micrometers
- Accelerometers
- Bench vises
- Pyrotechnic initiators
- Computerized numerical control CNC lathes
- Prick punches
- Flow meters
- Digital calipers
- Split dies
- Multi-axis mills
- Overhead cranes
- Lasers
- Plug taps
- Round files
- Ball peen hammers
- Fluorescent penetrant inspection equipment
- Soft face hammers
- Gauge blocks
- Thickness gauges
- Skin mills
- Hacksaws
- Box end wrenches
- Hand snips
- Digital torque wrenches
- Theodolites
- Welding torches
- Open end wrenches
- Planer gauges
- Mass spectrometers
- Purifying respirators
- Straight chisels
- Personal computers
- Body harnesses
- Vibration testers
- Vibration transducers
- Vernier calipers
- Combination wrenches
- Offset screwdrivers
- Go/no-go gauges
- Reed and Prince screwdrivers
- Allen wrenches
- Shielded arc welding tools
- Dial calipers
- Telescoping gauges
- Annealing ovens
- Countersinks
- Air drills
- Pressure gauges
- Aviation snips
- Alignment squares
- Borescopes
- Safety wire pliers
- Drive punches
- Accelerometer sensors
- Eddy current inspection equipment
- Shot peening equipment
- Tri-squares
- Computer numerical controlled CNC milling machines
- Dye penetrant inspection equipment
- Dividers
- Soldering irons
- Gamma ray testing equipment
- Data acquisition software
- Microsoft Office
- Computer aided design CAD software
- Microsoft PowerPoint
- Extensible markup language XML
- UNIX
- Microsoft Excel
- Inventory software
- Microsoft Visio
- Structured query language SQL
- Microsoft Word
- Oracle Java
- Computerized numerical control CNC software
- Vibration analysis software
- Microsoft SQL Server