Will “Test Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Test Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Technician
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Test Technician”
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Finish vehicle instrumentation and deinstrumentation.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Adjust, repair or replace faulty components of test setups and equipment.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Exchange cooling system components in various vehicles.
Related Technology & Tools
- Telescoping gauges
- Vibration testers
- Gyroscopes
- Dye penetrant inspection equipment
- Split dies
- Accelerometer sensors
- Allen wrenches
- Go/no-go gauges
- Ultrasonic inspection equipment
- Twist drills
- Digital calipers
- Brazing equipment
- Digital force gauges
- Mill files
- Box end wrenches
- Gamma ray testing equipment
- Vibration transducers
- Offset screwdrivers
- Air drills
- Bottoming taps
- Digital height gauges
- Thread gauges
- Depth micrometers
- Center punches
- Annealing ovens
- Bubble emission inspection equipment
- Spring calipers
- Electronic torque testers
- Coordinate measuring machines CMM
- Half-round files
- Steel rules
- Countersinks
- Dividers
- Alignment squares
- Vibration tables
- Fire extinguishers
- Shielded arc welding tools
- Protractors
- Flow meters
- Digital torque wrenches
- Scribers
- Torque wrenches
- Flat files
- Planer gauges
- Round files
- Safety wire pliers
- Soldering irons
- Shakers
- Aligning punches
- Wire crimpers
- Hydrasets
- Bench vises
- Welding torches
- Taper taps
- V blocks
- Straightedges
- Reed and Prince screwdrivers
- Brazing hearths
- Bore gauges
- Magnetic particle inspection equipment
- Personal computers
- Fluorescent penetrant inspection equipment
- Vertical turret lathes VTL
- Open end wrenches
- Gantry mills
- Plug gauges
- Infrared inspection equipment
- Telescopes
- X ray inspection equipment
- Computerized numerical control CNC lathes
- Drive punches
- Hook spanner wrenches
- Multi-axis mills
- Accelerometers
- Straight chisels
- Plug taps
- Terminal computers
- Safety lanyards
- Mass spectrometers
- Pressure gauges
- Computer numerical controlled CNC milling machines
- Skin mills
- Bleeder wrenches
- Drill presses
- Shot peening equipment
- Force transducers
- Snap gauges
- Scaffolding
- Layout compasses
- Safety goggles
- Riveting tools
- Dial calipers
- Body harnesses
- Eddy current inspection equipment
- Strain gauge balances
- Gauge blocks
- Depth gauges
- Socket wrenches
- Torx drivers
- Hand snips
- Adjustable wrenches
- Air-supplying respirators
- Overhead cranes
- Tri-squares
- Flat head screwdrivers
- Paint booths
- Borescopes
- Theodolites
- Power screwdrivers
- Hacksaws
- Impact hammers
- Precision files
- Vixen files
- Purifying respirators
- Lasers
- Voltmeters
- Vernier calipers
- Ball peen hammers
- Pin punches
- Mallets
- Combination wrenches
- Thickness gauges
- Gas arc welding equipment
- Small hole gauges
- Pyrotechnic initiators
- Forklifts
- Soft face hammers
- Micrometers
- Prick punches
- Knife files
- Thermocouples
- Aviation snips
- Computer aided design CAD software
- Computerized numerical control CNC software
- Microsoft Word
- Structured query language SQL
- Extensible markup language XML
- Microsoft SQL Server
- Microsoft Visio
- Vibration analysis software
- Microsoft PowerPoint
- UNIX
- Inventory software
- Oracle Java
- Data acquisition software
- Microsoft Excel
- Microsoft Office