Will “Aerospace Physiological Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Aerospace Physiological Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Aerospace Physiological Technician”
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Exchange cooling system components in various vehicles.
- Adjust, repair or replace faulty components of test setups and equipment.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Finish vehicle instrumentation and deinstrumentation.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Record and interpret test data on parts, assemblies, and mechanisms.
Related Technology & Tools
- Brazing hearths
- Prick punches
- Eddy current inspection equipment
- Soft face hammers
- Vibration testers
- Planer gauges
- Vernier calipers
- Wire crimpers
- Digital torque wrenches
- Mass spectrometers
- Hydrasets
- Aviation snips
- Thread gauges
- Combination wrenches
- Fire extinguishers
- Power screwdrivers
- Half-round files
- Flat head screwdrivers
- Borescopes
- Torx drivers
- Depth micrometers
- Multi-axis mills
- Vixen files
- Split dies
- Bottoming taps
- Plug gauges
- Purifying respirators
- Knife files
- Shot peening equipment
- Drive punches
- Thermocouples
- Vibration transducers
- Layout compasses
- Mallets
- Computerized numerical control CNC lathes
- Force transducers
- Gauge blocks
- Go/no-go gauges
- Precision files
- Ultrasonic inspection equipment
- Straight chisels
- Straightedges
- Bubble emission inspection equipment
- Theodolites
- V blocks
- Accelerometer sensors
- Thickness gauges
- Allen wrenches
- Forklifts
- Impact hammers
- Tri-squares
- Telescopes
- Vertical turret lathes VTL
- Voltmeters
- Accelerometers
- Magnetic particle inspection equipment
- Round files
- Steel rules
- Telescoping gauges
- Terminal computers
- Bench vises
- Offset screwdrivers
- Protractors
- Countersinks
- Bleeder wrenches
- Aligning punches
- Flow meters
- Electronic torque testers
- Hook spanner wrenches
- Overhead cranes
- Hacksaws
- Adjustable wrenches
- Open end wrenches
- Reed and Prince screwdrivers
- Fluorescent penetrant inspection equipment
- Vibration tables
- Micrometers
- Ball peen hammers
- Gas arc welding equipment
- Air drills
- Infrared inspection equipment
- Computer numerical controlled CNC milling machines
- Gantry mills
- Paint booths
- Box end wrenches
- Safety goggles
- Shakers
- Digital height gauges
- Drill presses
- Mill files
- Safety wire pliers
- Alignment squares
- Scribers
- Lasers
- Center punches
- Pin punches
- Bore gauges
- Strain gauge balances
- Skin mills
- Gyroscopes
- Body harnesses
- Snap gauges
- Taper taps
- Dye penetrant inspection equipment
- Gamma ray testing equipment
- Soldering irons
- Welding torches
- Small hole gauges
- Shielded arc welding tools
- Dial calipers
- Spring calipers
- Torque wrenches
- Dividers
- Coordinate measuring machines CMM
- X ray inspection equipment
- Digital force gauges
- Scaffolding
- Pyrotechnic initiators
- Socket wrenches
- Depth gauges
- Brazing equipment
- Personal computers
- Plug taps
- Twist drills
- Annealing ovens
- Digital calipers
- Pressure gauges
- Air-supplying respirators
- Hand snips
- Riveting tools
- Safety lanyards
- Flat files
- Structured query language SQL
- Computerized numerical control CNC software
- Data acquisition software
- Extensible markup language XML
- Microsoft SQL Server
- Microsoft PowerPoint
- Inventory software
- Microsoft Visio
- Computer aided design CAD software
- Microsoft Office
- Vibration analysis software
- UNIX
- Microsoft Word
- Oracle Java
- Microsoft Excel