Will “Aerospace Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Aerospace Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Aerospace Technician”
- Adjust, repair or replace faulty components of test setups and equipment.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Exchange cooling system components in various vehicles.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Finish vehicle instrumentation and deinstrumentation.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
Related Technology & Tools
- Gantry mills
- Protractors
- Infrared inspection equipment
- Bleeder wrenches
- Drill presses
- Soft face hammers
- Computerized numerical control CNC lathes
- Mass spectrometers
- Snap gauges
- Fire extinguishers
- Borescopes
- Mallets
- Bubble emission inspection equipment
- Straight chisels
- Accelerometers
- Magnetic particle inspection equipment
- Plug gauges
- Bench vises
- Gyroscopes
- Telescopes
- Pyrotechnic initiators
- Purifying respirators
- Dye penetrant inspection equipment
- Vibration transducers
- Gamma ray testing equipment
- Thread gauges
- Power screwdrivers
- Paint booths
- Scribers
- Drive punches
- Shakers
- Pin punches
- Dial calipers
- Plug taps
- Allen wrenches
- Layout compasses
- Body harnesses
- Ultrasonic inspection equipment
- Small hole gauges
- Torque wrenches
- Vixen files
- Vernier calipers
- Knife files
- Digital calipers
- Strain gauge balances
- Vibration testers
- Air drills
- Aligning punches
- Half-round files
- Alignment squares
- Tri-squares
- Hacksaws
- Skin mills
- Voltmeters
- Flat head screwdrivers
- Brazing equipment
- Dividers
- Go/no-go gauges
- Center punches
- Fluorescent penetrant inspection equipment
- Vibration tables
- Safety goggles
- Force transducers
- Personal computers
- Taper taps
- Box end wrenches
- Aviation snips
- Flow meters
- Hydrasets
- Lasers
- Bore gauges
- Bottoming taps
- Shielded arc welding tools
- Gauge blocks
- Safety wire pliers
- Multi-axis mills
- Brazing hearths
- Twist drills
- Mill files
- Gas arc welding equipment
- Round files
- Forklifts
- Digital height gauges
- Eddy current inspection equipment
- Torx drivers
- Spring calipers
- Coordinate measuring machines CMM
- Digital force gauges
- Flat files
- V blocks
- Socket wrenches
- Adjustable wrenches
- Open end wrenches
- Thickness gauges
- Hand snips
- Theodolites
- Overhead cranes
- Prick punches
- Precision files
- Offset screwdrivers
- Accelerometer sensors
- Planer gauges
- Ball peen hammers
- Soldering irons
- Computer numerical controlled CNC milling machines
- Impact hammers
- Air-supplying respirators
- Straightedges
- Reed and Prince screwdrivers
- Depth micrometers
- Scaffolding
- Digital torque wrenches
- Countersinks
- Thermocouples
- Safety lanyards
- X ray inspection equipment
- Annealing ovens
- Hook spanner wrenches
- Riveting tools
- Split dies
- Welding torches
- Electronic torque testers
- Pressure gauges
- Vertical turret lathes VTL
- Combination wrenches
- Shot peening equipment
- Wire crimpers
- Telescoping gauges
- Depth gauges
- Steel rules
- Terminal computers
- Micrometers
- Microsoft Office
- UNIX
- Vibration analysis software
- Microsoft SQL Server
- Extensible markup language XML
- Data acquisition software
- Inventory software
- Microsoft Visio
- Microsoft PowerPoint
- Computer aided design CAD software
- Oracle Java
- Computerized numerical control CNC software
- Microsoft Excel
- Microsoft Word
- Structured query language SQL