Will “Instrumentation Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Instrumentation Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Instrumentation Technician
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Instrumentation Technician”
- Exchange cooling system components in various vehicles.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Adjust, repair or replace faulty components of test setups and equipment.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Finish vehicle instrumentation and deinstrumentation.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
Related Technology & Tools
- Ultrasonic inspection equipment
- Force transducers
- Layout compasses
- Hacksaws
- Scribers
- Drill presses
- Personal computers
- Plug gauges
- Allen wrenches
- Fluorescent penetrant inspection equipment
- Theodolites
- Gantry mills
- Electronic torque testers
- Hand snips
- Gamma ray testing equipment
- Fire extinguishers
- Body harnesses
- Vertical turret lathes VTL
- Digital height gauges
- Drive punches
- Wire crimpers
- Air-supplying respirators
- Knife files
- Bubble emission inspection equipment
- Welding torches
- Shakers
- Micrometers
- Aviation snips
- Borescopes
- Vibration testers
- Bottoming taps
- Bleeder wrenches
- Gyroscopes
- Accelerometer sensors
- Torx drivers
- Socket wrenches
- Thread gauges
- X ray inspection equipment
- Power screwdrivers
- Digital force gauges
- Torque wrenches
- Thermocouples
- Scaffolding
- Overhead cranes
- Split dies
- Twist drills
- Reed and Prince screwdrivers
- Depth gauges
- Flat files
- Magnetic particle inspection equipment
- Straightedges
- Eddy current inspection equipment
- Vibration tables
- Combination wrenches
- Safety goggles
- Brazing equipment
- Vixen files
- Pin punches
- Prick punches
- Precision files
- Forklifts
- Digital torque wrenches
- Safety lanyards
- Open end wrenches
- Voltmeters
- Annealing ovens
- Computer numerical controlled CNC milling machines
- Taper taps
- Shot peening equipment
- Steel rules
- Purifying respirators
- Box end wrenches
- Snap gauges
- Shielded arc welding tools
- Coordinate measuring machines CMM
- Gauge blocks
- Terminal computers
- Pressure gauges
- Hydrasets
- Telescopes
- Infrared inspection equipment
- Alignment squares
- Air drills
- Offset screwdrivers
- Impact hammers
- Bore gauges
- Strain gauge balances
- Bench vises
- Soft face hammers
- Depth micrometers
- Planer gauges
- Countersinks
- Hook spanner wrenches
- Vernier calipers
- Mass spectrometers
- Spring calipers
- Dye penetrant inspection equipment
- Accelerometers
- Flow meters
- V blocks
- Lasers
- Center punches
- Telescoping gauges
- Protractors
- Tri-squares
- Thickness gauges
- Computerized numerical control CNC lathes
- Round files
- Straight chisels
- Mill files
- Brazing hearths
- Plug taps
- Adjustable wrenches
- Mallets
- Riveting tools
- Digital calipers
- Half-round files
- Gas arc welding equipment
- Skin mills
- Ball peen hammers
- Dial calipers
- Go/no-go gauges
- Pyrotechnic initiators
- Safety wire pliers
- Small hole gauges
- Soldering irons
- Paint booths
- Aligning punches
- Flat head screwdrivers
- Multi-axis mills
- Vibration transducers
- Dividers
- Inventory software
- Structured query language SQL
- Microsoft Word
- Computerized numerical control CNC software
- Microsoft Office
- UNIX
- Computer aided design CAD software
- Oracle Java
- Microsoft SQL Server
- Microsoft Excel
- Data acquisition software
- Extensible markup language XML
- Vibration analysis software
- Microsoft Visio
- Microsoft PowerPoint