Will “Engineering Specialist Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Engineering Specialist Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Engineering Specialist Technician”
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Finish vehicle instrumentation and deinstrumentation.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Exchange cooling system components in various vehicles.
- Adjust, repair or replace faulty components of test setups and equipment.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
Related Technology & Tools
- Thread gauges
- Aligning punches
- Prick punches
- Brazing hearths
- Open end wrenches
- Accelerometers
- Coordinate measuring machines CMM
- Computerized numerical control CNC lathes
- Digital height gauges
- Thermocouples
- Safety wire pliers
- Personal computers
- Hook spanner wrenches
- Soldering irons
- Planer gauges
- X ray inspection equipment
- Depth gauges
- Flat head screwdrivers
- Layout compasses
- Shakers
- Vibration transducers
- Adjustable wrenches
- Straight chisels
- Plug taps
- Skin mills
- Protractors
- Round files
- Twist drills
- Go/no-go gauges
- Digital torque wrenches
- Brazing equipment
- Power screwdrivers
- Electronic torque testers
- Strain gauge balances
- Taper taps
- Bore gauges
- Accelerometer sensors
- Small hole gauges
- Wire crimpers
- Safety goggles
- Spring calipers
- Plug gauges
- Shot peening equipment
- Flow meters
- Hydrasets
- Tri-squares
- Soft face hammers
- Hacksaws
- Borescopes
- Air drills
- Eddy current inspection equipment
- Air-supplying respirators
- Half-round files
- Computer numerical controlled CNC milling machines
- Welding torches
- Countersinks
- Paint booths
- Impact hammers
- Bleeder wrenches
- Voltmeters
- Socket wrenches
- Depth micrometers
- Drive punches
- Gantry mills
- Forklifts
- Lasers
- Gamma ray testing equipment
- Magnetic particle inspection equipment
- Knife files
- Terminal computers
- Vertical turret lathes VTL
- Bubble emission inspection equipment
- Fluorescent penetrant inspection equipment
- Force transducers
- Straightedges
- Pin punches
- Body harnesses
- Scribers
- Riveting tools
- Overhead cranes
- Flat files
- Purifying respirators
- Bottoming taps
- Digital calipers
- Split dies
- Vernier calipers
- Multi-axis mills
- Combination wrenches
- Mallets
- Torx drivers
- Theodolites
- Digital force gauges
- Hand snips
- Infrared inspection equipment
- Dye penetrant inspection equipment
- Snap gauges
- Mass spectrometers
- Safety lanyards
- Vibration testers
- Gas arc welding equipment
- Center punches
- Gyroscopes
- Pressure gauges
- Torque wrenches
- Micrometers
- Allen wrenches
- Scaffolding
- Dividers
- Dial calipers
- Steel rules
- Box end wrenches
- Reed and Prince screwdrivers
- Bench vises
- V blocks
- Fire extinguishers
- Aviation snips
- Telescopes
- Thickness gauges
- Precision files
- Drill presses
- Pyrotechnic initiators
- Alignment squares
- Ultrasonic inspection equipment
- Gauge blocks
- Ball peen hammers
- Mill files
- Vibration tables
- Telescoping gauges
- Vixen files
- Annealing ovens
- Shielded arc welding tools
- Offset screwdrivers
- Microsoft Visio
- Microsoft Excel
- Microsoft Office
- Computerized numerical control CNC software
- Oracle Java
- Data acquisition software
- UNIX
- Structured query language SQL
- Inventory software
- Microsoft SQL Server
- Microsoft Word
- Extensible markup language XML
- Vibration analysis software
- Computer aided design CAD software
- Microsoft PowerPoint