Will “Systems Test Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Systems Test Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Systems Test Technician
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Systems Test Technician”
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Finish vehicle instrumentation and deinstrumentation.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Exchange cooling system components in various vehicles.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Adjust, repair or replace faulty components of test setups and equipment.
Related Technology & Tools
- Dividers
- Vibration testers
- Alignment squares
- Multi-axis mills
- Vernier calipers
- Mallets
- Accelerometers
- Safety wire pliers
- Thermocouples
- Micrometers
- Mill files
- Flow meters
- Theodolites
- Computer numerical controlled CNC milling machines
- Fire extinguishers
- Annealing ovens
- Pin punches
- Bubble emission inspection equipment
- Steel rules
- Computerized numerical control CNC lathes
- Flat head screwdrivers
- Coordinate measuring machines CMM
- Scaffolding
- Telescopes
- Countersinks
- Terminal computers
- Dial calipers
- Taper taps
- Combination wrenches
- Riveting tools
- Drive punches
- Box end wrenches
- Tri-squares
- Precision files
- Strain gauge balances
- Prick punches
- Allen wrenches
- Plug gauges
- Bleeder wrenches
- Plug taps
- Protractors
- Purifying respirators
- Personal computers
- Forklifts
- Hacksaws
- Ball peen hammers
- Soft face hammers
- Skin mills
- Brazing equipment
- Knife files
- Split dies
- Power screwdrivers
- V blocks
- Aviation snips
- Gantry mills
- Impact hammers
- Bore gauges
- Aligning punches
- Body harnesses
- Snap gauges
- Shakers
- Shot peening equipment
- Center punches
- Shielded arc welding tools
- Vibration tables
- Straightedges
- Brazing hearths
- Depth gauges
- Thickness gauges
- Safety goggles
- Dye penetrant inspection equipment
- Air drills
- Thread gauges
- Straight chisels
- X ray inspection equipment
- Drill presses
- Force transducers
- Socket wrenches
- Eddy current inspection equipment
- Vibration transducers
- Open end wrenches
- Planer gauges
- Electronic torque testers
- Half-round files
- Depth micrometers
- Air-supplying respirators
- Soldering irons
- Pyrotechnic initiators
- Bench vises
- Reed and Prince screwdrivers
- Infrared inspection equipment
- Digital calipers
- Go/no-go gauges
- Overhead cranes
- Lasers
- Fluorescent penetrant inspection equipment
- Layout compasses
- Twist drills
- Voltmeters
- Small hole gauges
- Scribers
- Wire crimpers
- Pressure gauges
- Vixen files
- Round files
- Hydrasets
- Digital height gauges
- Hand snips
- Borescopes
- Magnetic particle inspection equipment
- Digital torque wrenches
- Welding torches
- Flat files
- Vertical turret lathes VTL
- Adjustable wrenches
- Gas arc welding equipment
- Torque wrenches
- Paint booths
- Gamma ray testing equipment
- Safety lanyards
- Spring calipers
- Telescoping gauges
- Bottoming taps
- Hook spanner wrenches
- Digital force gauges
- Ultrasonic inspection equipment
- Gyroscopes
- Accelerometer sensors
- Offset screwdrivers
- Mass spectrometers
- Gauge blocks
- Torx drivers
- Data acquisition software
- Microsoft Word
- Computer aided design CAD software
- UNIX
- Microsoft Visio
- Extensible markup language XML
- Microsoft Office
- Vibration analysis software
- Microsoft Excel
- Oracle Java
- Inventory software
- Microsoft PowerPoint
- Microsoft SQL Server
- Computerized numerical control CNC software
- Structured query language SQL