Will “Engineering Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Engineering Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Technician
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Engineering Technician”
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Adjust, repair or replace faulty components of test setups and equipment.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Finish vehicle instrumentation and deinstrumentation.
- Exchange cooling system components in various vehicles.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
Related Technology & Tools
- Ball peen hammers
- Half-round files
- Precision files
- Dividers
- Dye penetrant inspection equipment
- Countersinks
- Mill files
- Shakers
- Allen wrenches
- Body harnesses
- Voltmeters
- Protractors
- Taper taps
- Digital calipers
- Thickness gauges
- Combination wrenches
- Thread gauges
- Alignment squares
- Soldering irons
- Fluorescent penetrant inspection equipment
- Terminal computers
- Borescopes
- Mallets
- Eddy current inspection equipment
- Round files
- Digital force gauges
- Riveting tools
- Box end wrenches
- Offset screwdrivers
- Straight chisels
- Flat head screwdrivers
- Open end wrenches
- Gas arc welding equipment
- Spring calipers
- Wire crimpers
- Vibration tables
- Electronic torque testers
- Depth gauges
- Fire extinguishers
- Air drills
- Force transducers
- Multi-axis mills
- Bleeder wrenches
- Telescoping gauges
- Power screwdrivers
- Bench vises
- Planer gauges
- Brazing equipment
- Flow meters
- Impact hammers
- Torque wrenches
- Computer numerical controlled CNC milling machines
- Center punches
- Vibration transducers
- Hydrasets
- Torx drivers
- Socket wrenches
- Ultrasonic inspection equipment
- Thermocouples
- Straightedges
- Forklifts
- Knife files
- Snap gauges
- Gantry mills
- Air-supplying respirators
- Paint booths
- Hook spanner wrenches
- Vertical turret lathes VTL
- Tri-squares
- Shielded arc welding tools
- Plug gauges
- Drill presses
- Twist drills
- Computerized numerical control CNC lathes
- Aligning punches
- Bore gauges
- Vibration testers
- Pyrotechnic initiators
- Aviation snips
- Welding torches
- Pressure gauges
- Theodolites
- Bubble emission inspection equipment
- Accelerometer sensors
- Gyroscopes
- Flat files
- X ray inspection equipment
- Plug taps
- Safety goggles
- Gamma ray testing equipment
- Small hole gauges
- Dial calipers
- Soft face hammers
- Go/no-go gauges
- Depth micrometers
- Personal computers
- Infrared inspection equipment
- Overhead cranes
- Hand snips
- Pin punches
- Safety wire pliers
- Brazing hearths
- Scribers
- Vernier calipers
- Micrometers
- Vixen files
- Steel rules
- Reed and Prince screwdrivers
- Shot peening equipment
- Scaffolding
- Digital torque wrenches
- Prick punches
- Bottoming taps
- Adjustable wrenches
- V blocks
- Lasers
- Coordinate measuring machines CMM
- Strain gauge balances
- Mass spectrometers
- Skin mills
- Accelerometers
- Digital height gauges
- Gauge blocks
- Safety lanyards
- Hacksaws
- Layout compasses
- Split dies
- Annealing ovens
- Purifying respirators
- Drive punches
- Magnetic particle inspection equipment
- Telescopes
- Microsoft Office
- Vibration analysis software
- Computerized numerical control CNC software
- Oracle Java
- Microsoft Word
- UNIX
- Microsoft PowerPoint
- Computer aided design CAD software
- Data acquisition software
- Microsoft Visio
- Structured query language SQL
- Microsoft Excel
- Inventory software
- Microsoft SQL Server
- Extensible markup language XML