Will “Flight Data Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Flight Data Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Flight Data Technician”
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Finish vehicle instrumentation and deinstrumentation.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Exchange cooling system components in various vehicles.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Adjust, repair or replace faulty components of test setups and equipment.
- Record and interpret test data on parts, assemblies, and mechanisms.
Related Technology & Tools
- Steel rules
- Digital height gauges
- Taper taps
- Shakers
- Center punches
- Adjustable wrenches
- Half-round files
- Multi-axis mills
- Digital force gauges
- Gas arc welding equipment
- Borescopes
- Hydrasets
- Vernier calipers
- Micrometers
- Countersinks
- Small hole gauges
- Annealing ovens
- Safety lanyards
- Gauge blocks
- Reed and Prince screwdrivers
- Gantry mills
- Plug gauges
- Knife files
- Electronic torque testers
- Gamma ray testing equipment
- Terminal computers
- Forklifts
- Shielded arc welding tools
- Tri-squares
- Straight chisels
- Riveting tools
- Digital torque wrenches
- Dial calipers
- Skin mills
- Infrared inspection equipment
- Socket wrenches
- Torx drivers
- Thread gauges
- Snap gauges
- Torque wrenches
- Bench vises
- Protractors
- Hacksaws
- Ball peen hammers
- Brazing hearths
- Planer gauges
- Prick punches
- Shot peening equipment
- Welding torches
- Magnetic particle inspection equipment
- Safety goggles
- Lasers
- Coordinate measuring machines CMM
- Offset screwdrivers
- Open end wrenches
- Pin punches
- Layout compasses
- Box end wrenches
- Gyroscopes
- Paint booths
- Plug taps
- Theodolites
- Vibration testers
- Bore gauges
- Accelerometer sensors
- Flat files
- Bleeder wrenches
- Soft face hammers
- Force transducers
- Aligning punches
- Scaffolding
- Go/no-go gauges
- Depth micrometers
- Ultrasonic inspection equipment
- Vertical turret lathes VTL
- Impact hammers
- Dye penetrant inspection equipment
- Bubble emission inspection equipment
- Drill presses
- Mass spectrometers
- V blocks
- Thickness gauges
- Hook spanner wrenches
- Fire extinguishers
- Telescopes
- Aviation snips
- Vixen files
- Personal computers
- Soldering irons
- Eddy current inspection equipment
- Round files
- Flow meters
- X ray inspection equipment
- Voltmeters
- Wire crimpers
- Straightedges
- Digital calipers
- Pyrotechnic initiators
- Precision files
- Strain gauge balances
- Body harnesses
- Split dies
- Overhead cranes
- Pressure gauges
- Mallets
- Twist drills
- Bottoming taps
- Flat head screwdrivers
- Hand snips
- Air-supplying respirators
- Purifying respirators
- Spring calipers
- Accelerometers
- Allen wrenches
- Safety wire pliers
- Drive punches
- Fluorescent penetrant inspection equipment
- Vibration tables
- Mill files
- Alignment squares
- Dividers
- Air drills
- Telescoping gauges
- Power screwdrivers
- Brazing equipment
- Scribers
- Combination wrenches
- Thermocouples
- Vibration transducers
- Computerized numerical control CNC lathes
- Computer numerical controlled CNC milling machines
- Depth gauges
- Computer aided design CAD software
- Microsoft PowerPoint
- UNIX
- Microsoft SQL Server
- Inventory software
- Microsoft Visio
- Oracle Java
- Microsoft Excel
- Microsoft Office
- Extensible markup language XML
- Data acquisition software
- Computerized numerical control CNC software
- Microsoft Word
- Vibration analysis software
- Structured query language SQL